Power engineering
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/79/Dampfturbine_Montage01.jpg/220px-Dampfturbine_Montage01.jpg)
Part of a series on |
Power engineering |
---|
Electric power conversion |
Electric power infrastructure |
|
Electric power systems components |
Relevant topics on |
Electrical installations |
---|
Wiring practice by region or country |
|
Regulation of electrical installations |
Cabling and accessories |
Switching and protection devices |
Power engineering, also called power systems engineering, is a subfield of electrical engineering that deals with the generation, transmission, distribution, and utilization of electric power, and the electrical apparatus connected to such systems. Although much of the field is concerned with the problems of three-phase AC power – the standard for large-scale power transmission and distribution across the modern world – a significant fraction of the field is concerned with the conversion between AC and DC power and the development of specialized power systems such as those used in aircraft or for electric railway networks. Power engineering draws the majority of its theoretical base from electrical engineering.
History[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/58/PearlStreetStation.jpg/200px-PearlStreetStation.jpg)
Pioneering years[]
Electricity became a subject of scientific interest in the late 17th century. Over the next two centuries a number of important discoveries were made including the incandescent light bulb and the voltaic pile.[1][2] Probably the greatest discovery with respect to power engineering came from Michael Faraday who in 1831 discovered that a change in magnetic flux induces an electromotive force in a loop of wire—a principle known as electromagnetic induction that helps explain how generators and transformers work.[3]
In 1881 two electricians built the world's first power station at Godalming in England. The station employed two waterwheels to produce an alternating current that was used to supply seven Siemens arc lamps at 250 volts and thirty-four incandescent lamps at 40 volts.[4] However supply was intermittent and in 1882 Thomas Edison and his company, The Edison Electric Light Company, developed the first steam-powered electric power station on Pearl Street in New York City. The Pearl Street Station consisted of several generators and initially powered around 3,000 lamps for 59 customers.[5][6] The power station used direct current and operated at a single voltage. Since the direct current power could not be easily transformed to the higher voltages necessary to minimise power loss during transmission, the possible distance between the generators and load was limited to around half-a-mile (800 m).[7]
That same year in London Lucien Gaulard and John Dixon Gibbs demonstrated the first transformer suitable for use in a real power system. The practical value of Gaulard and Gibbs' transformer was demonstrated in 1884 at Turin where the transformer was used to light up forty kilometres (25 miles) of railway from a single alternating current generator.[8] Despite the success of the system, the pair made some fundamental mistakes. Perhaps the most serious was connecting the primaries of the transformers in series so that switching one lamp on or off would affect other lamps further down the line. Following the demonstration George Westinghouse, an American entrepreneur, imported a number of the transformers along with a Siemens generator and set his engineers to experimenting with them in the hopes of improving them for use in a commercial power system.
One of Westinghouse's engineers, William Stanley, recognised the problem with connecting transformers in series as opposed to parallel and also realised that making the iron core of a transformer a fully enclosed loop would improve the voltage regulation of the secondary winding. Using this knowledge he built the world's first practical transformer based alternating current power system at Great Barrington, Massachusetts in 1886.[9][10] In 1885 the Italian physicist and electrical engineer Galileo Ferraris demonstrated an induction motor and in 1887 and 1888 the Serbian-American engineer Nikola Tesla filed a range of patents related to power systems including one for a practical two-phase induction motor[11][12] which Westinghouse licensed for his AC system.
By 1890 the power industry had flourished and power companies had built thousands of power systems (both direct and alternating current) in the United States and Europe – these networks were effectively dedicated to providing electric lighting. During this time a fierce rivalry in the US known as the "war of the currents" emerged between Edison and Westinghouse over which form of transmission (direct or alternating current) was superior. In 1891, Westinghouse installed the first major power system that was designed to drive an electric motor and not just provide electric lighting. The installation powered a 100 horsepower (75 kW) synchronous motor at Telluride, Colorado with the motor being started by a Tesla induction motor.[13] On the other side of the Atlantic, Oskar von Miller built a 20 kV 176 km three-phase transmission line from Lauffen am Neckar to Frankfurt am Main for the Electrical Engineering Exhibition in Frankfurt.[14] In 1895, after a protracted decision-making process, the Adams No. 1 generating station at Niagara Falls began transmitting three-phase alternating current power to Buffalo at 11 kV. Following completion of the Niagara Falls project, new power systems increasingly chose alternating current as opposed to direct current for electrical transmission.[15]
Twentieth century[]
Power engineering and Bolshevism[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c6/Klutsis_%281929%29_Soviet_Power_plus_electrification.png/220px-Klutsis_%281929%29_Soviet_Power_plus_electrification.png)
The generation of electricity was regarded as particularly important following the Bolshevik seizure of power. Lenin stated "Communism is Soviet power plus the electrification of the whole country."[16] He was subsequently featured on many Soviet posters, stamps etc. presenting this view. The GOELRO plan was initiated in 1920 as the first Bolshevik experiment in industrial planning and in which Lenin became personally involved. Gleb Krzhizhanovsky was another key figure involved, having been involved in the construction of a power station in Moscow in 1910. He had also known Lenin since 1897 when they were both in the St. Petersburg chapter of the Union of Struggle for the Liberation of the Working Class.
Power engineering in the USA[]
In 1936 the first commercial high-voltage direct current (HVDC) line using mercury-arc valves was built between Schenectady and Mechanicville, New York. HVDC had previously been achieved by installing direct current generators in series (a system known as the Thury system) although this suffered from serious reliability issues.[17] In 1957 Siemens demonstrated the first solid-state rectifier (solid-state rectifiers are now the standard for HVDC systems) however it was not until the early 1970s that this technology was used in commercial power systems.[18] In 1959 Westinghouse demonstrated the first circuit breaker that used SF6 as the interrupting medium.[19] SF6 is a far superior dielectric to air and, in recent times, its use has been extended to produce far more compact switching equipment (known as switchgear) and transformers.[20][21] Many important developments also came from extending innovations in the ICT field to the power engineering field. For example, the development of computers meant load flow studies could be run more efficiently allowing for much better planning of power systems. Advances in information technology and telecommunication also allowed for much better remote control of the power system's switchgear and generators.
Power[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/77/Qatar%2C_power_lines_%286%29.jpg/220px-Qatar%2C_power_lines_%286%29.jpg)
Power Engineering deals with the generation, transmission, distribution and utilization of electricity as well as the design of a range of related devices. These include transformers, electric generators, electric motors and power electronics.
Power engineers may also work on systems that do not connect to the grid. These systems are called off-grid power systems and may be used in preference to on-grid systems for a variety of reasons. For example, in remote locations it may be cheaper for a mine to generate its own power rather than pay for connection to the grid and in most mobile applications connection to the grid is simply not practical.
Fields[]
Electricity generation covers the selection, design and construction of facilities that convert energy from primary forms to electric power.
Electric power transmission requires the engineering of high voltage transmission lines and substation facilities to interface to generation and distribution systems. High voltage direct current systems are one of the elements of an electric power grid.
Electric power distribution engineering covers those elements of a power system from a substation to the end customer.
Power system protection is the study of the ways an electrical power system can fail, and the methods to detect and mitigate for such failures.
In most projects, a power engineer must coordinate with many other disciplines such as civil and mechanical engineers, environmental experts, and legal and financial personnel. Major power system projects such as a large generating station may require scores of design professionals in addition to the power system engineers. At most levels of professional power system engineering practice, the engineer will require as much in the way of administrative and organizational skills as electrical engineering knowledge.
Professional societies and international standards organizations[]
In both the UK and the US, professional societies had long existed for civil and mechanical engineers. The IEE was founded in the UK in 1871, and the AIEE in the United States in 1884. These societies contributed to the exchange of electrical knowledge and the development of electrical engineering education. On an international level, the International Electrotechnical Commission, which was founded in 1906, prepares standards for power engineering, with 20,000 electrotechnical experts from 172 countries developing global specifications based on consensus.
See also[]
- Energy economics
- Power electronics
- Power system simulation
References[]
- ^ "The History Of The Light Bulb". Net Guides Publishing, Inc. 2004. Retrieved 2007-05-02.
- ^ Greenslade, Thomas. "The Voltaic Pile". Kenyon College. Retrieved 2008-03-31.
- ^ "Faraday Page". The Royal Institute. Archived from the original on 2008-03-29. Retrieved 2008-03-31.
- ^ "Godalming Power Station". Engineering Timelines. Retrieved 2009-05-03.
- ^ Williams, Jasmin (2007-11-30). "Edison Lights The City". New York Post. Retrieved 2008-03-31.
- ^ Grant, Casey. "The Birth of NFPA". National Fire Protection Association. Archived from the original on 2007-12-28. Retrieved 2008-03-31.
- ^ "Bulk Electricity Grid Beginnings" (PDF) (Press release). New York Independent System Operator. Archived from the original (PDF) on 2009-02-26. Retrieved 2008-05-25.
- ^ Katz, Evgeny (2007-04-08). "Lucien Gaulard". Archived from the original on 2008-04-22. Retrieved 2008-05-25.
- ^ Great Barrington 1886 - Inspiring an industry toward AC power
- ^ Blalock, Thomas (2004-10-02). "Alternating Current Electrification, 1886". IEEE. Retrieved 2008-05-25.
- ^ Froehlich, Fritz E.; Kent, Allen (December 1998). Fritz E. Froehlich, Allen Kent, The Froehlich/Kent Encyclopedia of Telecommunications: Volume 17, page 36. ISBN 9780824729158. Retrieved 2012-09-10.
- ^ Petar Miljanic, Tesla's Polyphase System and Induction Motor, Serbian Journal of Electrical Engineering, pp. 121–130, Vol. 3, No. 2, November 2006.
- ^ Foran, Jack. "The Day They Turned The Falls On". Archived from the original on 2008-05-11. Retrieved 2008-05-25.
- ^ Voith Siemens (company) (2007-02-01). HyPower (PDF). p. 7. Archived from the original (PDF) on 2012-07-25. Retrieved 2008-05-25.
- ^ "Adams Hydroelectric Generating Plant, 1895". IEEE. Retrieved 2008-05-25.
- ^ Vladimir, Lenin (1920). Our Foreign and Domestic Position and Party Tasks. Moscow.
Communism is Soviet power plus the electrification of the whole country, since industry cannot be developed without electrification.
- ^ "A Novel but Short-Lived Power Distribution System". IEEE. 2005-05-01. Archived from the original on 2011-05-24. Retrieved 2008-05-25.
- ^ Gene Wolf (2000-12-01). "Electricity Through the Ages". Transmission & Distribution World.
- ^ John Tyner, Rick Bush and Mike Eby (1999-11-01). "A Fifty-Year Retrospective". Transmission & Distribution World.
- ^ "Gas Insulated Switchgear". ABB. Retrieved 2008-05-25.
- ^ Amin, Sayed. "SF6 Transformer". Archived from the original on 2008-06-16. Retrieved 2008-05-25.
External links[]
![]() |
Wikimedia Commons has media related to Power engineering. |
- IEEE Power Engineering Society
- Jadavpur University, Department of Power Engineering
- Power Engineering International Magazine Articles
- Power Engineering Magazine Articles
- American Society of Power Engineers, Inc.
- National Institute for the Uniform Licensing of Power Engineer Inc.
- Worcester Polytechnic Institute Power Systems Engineering
- Power engineering
- Mechanical engineering