Samarium(III) sulfide
Names | |
---|---|
Other names
disamarium trisulphide; Samarium sesquisulfide
| |
Identifiers | |
| |
3D model (JSmol)
|
|
ChemSpider | |
ECHA InfoCard | 100.031.875 ![]() |
EC Number |
|
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
Sm2S3 | |
Molar mass | 396.915 g/mol |
Appearance | red-brown crystals |
Density | 5.87 g/cm3, solid |
Melting point | 1,720 °C (3,130 °F; 1,990 K) |
Band gap | 1.71 eV |
+3300.0·10−6 cm3/mol | |
Structure | |
orthorhombic | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
![]() ![]() ![]() | |
Infobox references | |
Samarium(III) sulfide (Sm2S3) is a chemical compound of the rare earth element samarium, and sulfur. In this compound samarium is in the +3 oxidation state, and sulfur is an anion in the −2 state.
Production[]
One way to make Samarium(III) sulfide is to heat samarium metal with sulfur. Another way to make a thin film is to alternatively soak in samarium(III) chloride tartaric acid complex, and sodium thiosulfate.[1]
Properties[]
The low temperature α form crystallises in the orthorhombic crystal system. The unit cell has dimensions a=7.376, b=3.9622 c=15.352 Å with volume 448.7 Å3. There are four of the formula in each unit cell (Sm8S12). The density comes out to 5.88 kg/liter. There are two kinds of samarium coordination in the solid, one is eight coordinated with sulfur surrounding in a bicapped trigonal pyramid. The other is a sevenfold capped distorted octahedral arrangement. This structure is similar to other light rare-earth element sulfides.[2]
Samarium(III) sulfide is a semiconductor with a band gap of 1.7 eV.[3] As a thin film on high area electrodes, it is under investigation as a super capacitor dielectric, with of up to 360 Farads per gram.[4]
Related[]
Related samarium sulfides include the monosulfide SmS and the mixed valent Sm3S4 which are also semiconductors.[5] KSm2CuS6 is a layered quaternary sulfide.[6]
References[]
- ^ Kumbhar, V.S.; Jagadale, A.D.; Lokhande, C.D. (July 2013). "Supercapacitive evaluation of soft chemically deposited α-Sm2S3 thin films". Journal of Power Sources. 234: 107–110. doi:10.1016/j.jpowsour.2013.01.078.
- ^ Aruga, Atsushi; Tsujimi, Sachiko; Nakai, Izumi (1996). "Crystal Structure of Samarium Sesquisulfide, α-Sm2S3". Analytical Sciences. 12 (1): 151–152. doi:10.2116/analsci.12.151.
- ^ Marin, Chris M.; Wang, Lu; Brewer, Joseph R.; Mei, Wai-Ning; Cheung, Chin Li (June 2013). "Crystalline α-Sm2S3 nanowires: Structure and optical properties of an unusual intrinsically degenerate semiconductor". Journal of Alloys and Compounds. 563: 293–299. doi:10.1016/j.jallcom.2013.02.082.
- ^ Ghogare, T.T.; Lokhande, V.C.; Ji, T.; Patil, U.M.; Lokhande, C.D. (June 2020). "A graphene oxide /samarium sulfide (GO/Sm2S3) composite thin film: Preparation and electrochemical study". Surfaces and Interfaces. 19: 100507. doi:10.1016/j.surfin.2020.100507.
- ^ Wang, Lu; Marin, Chris; Mei, Wai-Ning; Cheung, Chin (31 May 2015). "Electronic structures of lanthanum, samarium, and gadolinium sulfides". AIMS Materials Science. pp. 97–105.
- ^ Pomelova, Tatiana A.; Podlipskaya, Tatiana Yu.; Kuratieva, Natalia V.; Cherkov, Alexander G.; Nebogatikova, Nadezhda A.; Ryzhikov, Maxim R.; Huguenot, Arthur; Gautier, Régis; Naumov, Nikolay G. (2018-11-05). "Synthesis, Crystal Structure, and Liquid Exfoliation of Layered Lanthanide Sulfides KLn 2 CuS 6 (Ln = La, Ce, Pr, Nd, Sm)". Inorganic Chemistry. 57 (21): 13594–13605. doi:10.1021/acs.inorgchem.8b02213. ISSN 0020-1669. PMID 30354089.
- Sulfides
- Samarium compounds
- Inorganic compound stubs