Oxidation state

The oxidation state, sometimes referred to as oxidation number, describes the degree of oxidation (loss of electrons) of an atom in a chemical compound. Conceptually, the oxidation state, which may be positive, negative or zero, is the hypothetical charge that an atom would have if all bonds to atoms of different elements were 100% ionic, with no covalent component. This is never exactly true for real bonds.

The oxidation state of an atom does not represent the "real" formal charge on that atom, or any other actual atomic property. This is particularly true of high oxidation states, where the ionization energy required to produce a multiply positive ion is far greater than the energies available in chemical reactions. Additionally, the oxidation states of atoms in a given compound may vary depending on the choice of electronegativity scale used in their calculation. Thus, the oxidation state of an atom in a compound is purely a formalism. It is nevertheless important in understanding the nomenclature conventions of inorganic compounds. Also, several observations regarding chemical reactions may be explained at a basic level in terms of oxidation states.

Oxidation states are typically represented by integers which may be positive, zero, or negative. In some cases, the average oxidation state of an element is a fraction, such as 8/3 for iron in magnetite Fe
₃O
₄ (see below). The highest known oxidation state is reported to be +9 in the tetroxoiridium(IX) cation (IrO⁺
₄).^[1] It is predicted that even a +12 oxidation state may be achievable by uranium in the unusual hexoxide UO₆.^[2] The lowest oxidation state is −5, as for boron in Al₃BC.^[3]

In inorganic nomenclature, the oxidation state is represented by a Roman numeral placed after the element name inside the parenthesis or as a superscript after the element symbol, e.g. Iron(III) oxide.

The term oxidation was first used by Antoine Lavoisier to signify the reaction of a substance with oxygen. Much later, it was realized that the substance, upon being oxidized, loses electrons, and the meaning was extended to include other reactions in which electrons are lost, regardless of whether oxygen was involved. The increase in the oxidation state of an atom, through a chemical reaction, is known as oxidation; a decrease in oxidation state is known as a reduction. Such reactions involve the formal transfer of electrons: a net gain in electrons being a reduction, and a net loss of electrons being oxidation. For pure elements, the oxidation state is zero.

IUPAC definition[]

IUPAC has published a "Comprehensive definition of the term oxidation state (IUPAC Recommendations 2016)".^[4] It is a distillation of an IUPAC technical report "Toward a comprehensive definition of oxidation state" from 2014.^[5] The current IUPAC Gold Book definition of oxidation state is:

Oxidation state of an atom is the charge of this atom after ionic approximation of its heteronuclear bonds...
— IUPAC^[6]

and the term oxidation number is nearly synonymous.^[7]

The underlying principle is that the ionic charge is "the oxidation state of an atom, after ionic approximation of its bonds",^[8] where ionic approximation means, hypothesizing that all bonds are ionic. Several criteria were considered for the ionic approximation:

1) Extrapolation of the bond’s polarity;

a) from the electronegativity difference,

b) from the dipole moment, and

c) from quantum‐chemical calculations of charges.

2) Assignment of electrons according to the atom’s contribution to the bonding MO^[8]^[9]/ the electron's allegiance in a LCAO–MO model.^[10]

In a bond between two different elements, the bond's electrons are assigned to its main atomic contributor/higher electronegativity; in a bond between two atoms of the same element, the electrons are divided equally. This is because most electronegativity scales depend on the atom's bonding state, which makes the assignment of the oxidation state a somewhat circular argument. For example, some scales may turn out unusual oxidation states, such as -6 for platinum in PtH₄⁻², for Pauling and Mulliken scales.^[11] The dipole moments would, sometimes, also turn out abnormal oxidation numbers, such as in CO and NO, which are oriented with their positive end towards oxygen. Therefore, this leaves the atom's contribution to the bonding MO, the atomic-orbital energy, and from quantum-chemical calculations of charges, as the only viable criteria with cogent values for ionic approximation. However, for a simple estimate for the ionic approximation, we can use Allen electronegativities,^[8] as only that electronegativity scale is truly independent of the oxidation state, as it relates to the average valence‐electron energy of the free atom:

v t Electronegativity using the Allen scale
Group →	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18
↓ Period
1	H 2.300																	He 4.160
2	Li 0.912	Be 1.576											B 2.051	C 2.544	N 3.066	O 3.610	F 4.193	Ne 4.787
3	Na 0.869	Mg 1.293											Al 1.613	Si 1.916	P 2.253	S 2.589	Cl 2.869	Ar 3.242
4	K 0.734	Ca 1.034	Sc 1.19	Ti 1.38	V 1.53	Cr 1.65	Mn 1.75	Fe 1.80	Co 1.84	Ni 1.88	Cu 1.85	Zn 1.588	Ga 1.756	Ge 1.994	As 2.211	Se 2.424	Br 2.685	Kr 2.966
5	Rb 0.706	Sr 0.963	Y 1.12	Zr 1.32	Nb 1.41	Mo 1.47	Tc 1.51	Ru 1.54	Rh 1.56	Pd 1.58	Ag 1.87	Cd 1.521	In 1.656	Sn 1.824	Sb 1.984	Te 2.158	I 2.359	Xe 2.582
6	Cs 0.659	Ba 0.881	Lu 1.09	Hf 1.16	Ta 1.34	W 1.47	Re 1.60	Os 1.65	Ir 1.68	Pt 1.72	Au 1.92	Hg 1.765	Tl 1.789	Pb 1.854	Bi 2.01	Po 2.19	At 2.39	Rn 2.60
7	Fr 0.67	Ra 0.89
See also: Electronegativities of the elements (data page)

Determination[]

While introductory levels of chemistry teaching use postulated oxidation states, the IUPAC recommendation^[4] and the Gold Book entry^[6] list two entirely general algorithms for the calculation of the oxidation states of elements in chemical compounds.

Simple approach without bonding considerations[]

Introductory chemistry uses postulates: the oxidation state for an element in a chemical formula is calculated from the overall charge and postulated oxidation states for all the other atoms.

A simple example is based on two postulates,

OS = +1 for hydrogen
OS = −2 for oxygen

where OS stands for oxidation state. This approach yields correct oxidation states in oxides and hydroxides of any single element, and in acids such as H₂SO₄ or H₂Cr₂O₇. Its coverage can be extended either by a list of exceptions or by assigning priority to the postulates. The latter works for H₂O₂ where the priority of rule 1 leaves both oxygens with oxidation state −1.

Additional postulates and their ranking may expand the range of compounds to fit a textbook's scope. As an example, one postulatory algorithm from many possible; in a sequence of decreasing priority:

An element in a free form has OS = 0.
In a compound or ion, the sum of the oxidation states equals the total charge of the compound or ion.
Fluorine in compounds has OS = −1; this extends to chlorine and bromine only when not bonded to a lighter halogen, oxygen or nitrogen.
Group 1 and group 2 metals in compounds have OS = +1 and +2, respectively.
Hydrogen has OS = +1 but adopts −1 when bonded as a hydride to metals or metalloids.
Oxygen in compounds has OS = −2 but only when not bonded to oxygen (e.g. in peroxides) or fluorine.

This set of postulates covers oxidation states of fluorides, chlorides, bromides, oxides, hydroxides, and hydrides of any single element. It covers all oxoacids of any central atom (and all their fluoro-, chloro-, and bromo-relatives), as well as salts of such acids with group 1 and 2 metals. It also covers iodides, sulfides, and similar simple salts of these metals.

Algorithm of assigning bonds[]

This algorithm is performed on a Lewis structure (a diagram that shows all valence electrons). Oxidation state equals the charge of an atom after each of its heteronuclear bonds has been assigned to the more-electronegative partner of the bond (except when that partner is a reversibly bonded Lewis-acid ligand) and homonuclear bonds have been divided equally:

where each "—" represents an electron pair (either shared between two atoms or solely on one atom), and "OS" is the oxidation state as a numerical variable.

After the electrons have been assigned according to the vertical red lines on the formula, the total number of valence electrons that now "belong" to each atom is subtracted by the number N of valence electrons of the neutral atom (such as 5 for nitrogen in group 15) to yield that atom's oxidation state.

This example shows the importance of describing the bonding. Its summary formula, HNO₃, corresponds to two structural isomers; the peroxynitrous acid in the above figure and the more stable nitric acid. With the formula HNO₃, the simple approach without bonding considerations yields −2 for all three oxygens and +5 for nitrogen, which is correct for nitric acid. For the peroxynitrous acid, however, the two oxygens in the O–O bond each has OS = −1 and the nitrogen has OS = +3, which requires a structure to understand.

Organic compounds are treated in a similar manner; exemplified here on functional groups occurring in between CH₄ and CO₂:

Analogously for transition-metal compounds; CrO(O
2)
2 on the left has a total of 36 valence electrons (18 pairs to be distributed), and Cr(CO)
6 on the right has 66 valence electrons (33 pairs):

A key step is drawing the Lewis structure of the molecule (neutral, cationic, anionic): atom symbols are arranged so that pairs of atoms can be joined by single two-electron bonds as in the molecule (a sort of "skeletal" structure), and the remaining valence electrons are distributed such that sp atoms obtain an octet (duet for hydrogen) with a priority that increases in proportion with electronegativity. In some cases, this leads to alternative formulae that differ in bond orders (the full set of which is called the resonance formulas). Consider the sulfate anion (SO²⁻
₄ with 32 valence electrons; 24 from oxygens, 6 from sulfur, 2 of the anion charge obtained from the implied cation). The bond orders to the terminal oxygens do not affect the oxidation state so long as the oxygens have octets. Already the skeletal structure, top left, yields the correct oxidation states, as does the Lewis structure, top right (one of the resonance formulas):

The bond-order formula at the bottom is closest to the reality of four equivalent oxygens each having a total bond order of 2. That total includes the bond of order 1/2 to the implied cation and follows the 8 − N rule^[5] requiring that the main-group atom's bond order equals 8 minus N valence electrons of the neutral atom, enforced with a priority that proportionately increases with electronegativity.

This algorithm works equally for molecular cations composed of several atoms. An example is the ammonium cation of 8 valence electrons (5 from nitrogen, 4 from hydrogens, minus 1 electron for the cation's positive charge):

Drawing Lewis structures with electron pairs as dashes emphasizes the essential equivalence of bond pairs and lone pairs when counting electrons and moving bonds onto atoms. Structures drawn with electron dot pairs are of course identical in every way:

The algorithm's caveat[]

The algorithm contains a caveat, which concerns rare cases of transition-metal complexes with a type of ligand that is reversibly bonded as a Lewis acid (as an acceptor of the electron pair from the transition metal); termed a "Z-type" ligand in Green's covalent bond classification method. The caveat originates from the simplifying use of electronegativity instead of the MO-based electron allegiance to decide the ionic sign.^[4] One early example is the O₂S−RhCl(CO)(PPh₃)₂ complex^[12] with SO₂ as the reversibly-bonded acceptor ligand (released upon heating). The Rh−S bond is therefore extrapolated ionic against Allen electronegativities of rhodium and sulfur, yielding oxidation state +1 for rhodium:

Algorithm of summing bond orders[]

This algorithm works on Lewis structures and bond graphs of extended (non-molecular) solids:

Oxidation state is obtained by summing the heteronuclear-bond orders at the atom as positive if that atom is the electropositive partner in a particular bond and as negative if not, and the atom’s formal charge (if any) is added to that sum.

Applied to a Lewis structure[]

An example of a Lewis structure with no formal charge,

illustrates that, in this algorithm, homonuclear bonds are simply ignored (the bond orders are in blue).

Carbon monoxide exemplifies a Lewis structure with formal charges:

To obtain the oxidation states, the formal charges are summed with the bond-order value taken positively at the carbon and negatively at the oxygen.

Applied to molecular ions, this algorithm considers the actual location of the formal (ionic) charge, as drawn in the Lewis structure. As an example, summing bond orders in the ammonium cation yields −4 at the nitrogen of formal charge +1, with the two numbers adding to the oxidation state of −3:

The sum of oxidation states in the ion equals its charge (as it equals zero for a neutral molecule).

Also in anions, the formal (ionic) charges have to be considered when nonzero. For sulfate this is exemplified with the skeletal or Lewis structures (top), compared with the bond-order formula of all oxygens equivalent and fulfilling the octet and 8 − N rules (bottom):

Applied to bond graph[]

A bond graph in solid-state chemistry is a chemical formula of an extended structure, in which direct bonding connectivities are shown. An example is the AuORb₃ perovskite, the unit cell of which is drawn on the left and the bond graph (with added numerical values) on the right:

We see that the oxygen atom bonds to the six nearest rubidium cations, each of which has 4 bonds to the auride anion. The bond graph summarizes these connectivities. The bond orders (also called bond valences) sum up to oxidation states according to the attached sign of the bond's ionic approximation (there are no formal charges in bond graphs).

Determination of oxidation states from a bond graph can be illustrated on ilmenite, FeTiO₃. We may ask whether the mineral contains Fe²⁺ and Ti⁴⁺, or Fe³⁺ and Ti³⁺. Its crystal structure has each metal atom bonded to six oxygens and each of the equivalent oxygens to two irons and two titaniums, as in the bond graph below. Experimental data show that three metal-oxygen bonds in the octahedron are short and three are long (the metals are off-center). The bond orders (valences), obtained from the bond lengths by the bond valence method, sum up to 2.01 at Fe and 3.99 at Ti; which can be rounded off to oxidation states +2 and +4, respectively:

Balancing redox[]

Oxidation states can be useful for balancing chemical equations for oxidation-reduction (or redox) reactions, because the changes in the oxidized atoms have to be balanced by the changes in the reduced atoms. For example, in the reaction of acetaldehyde with Tollens' reagent to form acetic acid (shown below), the carbonyl carbon atom changes its oxidation state from +1 to +3 (loses two electrons). This oxidation is balanced by reducing two Ag⁺ cations to Ag⁰ (gaining two electrons in total).

An inorganic example is the Bettendorf reaction using SnCl₂ to prove the presence of arsenite ions in a concentrated HCl extract. When arsenic(III) is present, a brown coloration appears forming a dark precipitate of arsenic, according to the following simplified reaction:

2 As³⁺ + 3 Sn²⁺ → 2 As⁰ + 3 Sn⁴⁺

Here three tin atoms are oxidized from oxidation state +2 to +4, yielding six electrons that reduce two arsenic atoms from oxidation state +3 to 0. The simple one-line balancing goes as follows: the two redox couples are written down as they react;

As³⁺ + Sn²⁺ ⇌ As⁰ + Sn⁴⁺.

One tin is oxidized from oxidation state +2 to +4, a two-electron step, hence 2 is written in front of the two arsenic partners. One arsenic is reduced from +3 to 0, a three-electron step, hence 3 goes in front of the two tin partners. An alternative three-line procedure is to write separately the half-reactions for oxidation and reduction, each balanced with electrons, and then to sum them up such that the electrons cross out. In general, these redox balances (the one-line balance or each half-reaction) need to be checked for the ionic and electron charge sums on both sides of the equation being indeed equal. If they are not equal, suitable ions are added to balance the charges and the non-redox elemental balance.

Appearances[]

Nominal oxidation states[]

A nominal oxidation state is a general term for two specific purpose-oriented values:

Electrochemical oxidation state^{[citation needed]}; it represents a molecule or ion in the Latimer diagram or Frost diagram for its redox-active element. An example is the Latimer diagram for sulfur at pH 0 where the electrochemical oxidation state +2 for sulfur puts HS
₂O⁻
₃ between S and H₂SO₃:

Systematic oxidation state; it is chosen from close alternatives for pedagogical reasons of descriptive chemistry. An example is the oxidation state of phosphorus in H₃PO₃ (which is in fact the diprotic HPO(OH)₂) taken nominally as +3, while Allen electronegativities of phosphorus and hydrogen suggest +5 by a narrow margin that makes the two alternatives almost equivalent:

Both alternative oxidation states of phosphorus make chemical sense, depending on the chemical property or reaction we wish to emphasize. In contrast, any mathematical alterations, such as the average (+4) does not.

Ambiguous oxidation states[]

Lewis formulae are fine rule-based approximations of chemical reality, as indeed are Allen electronegativities. Still, oxidation states may seem ambiguous when their determination is not straightforward. Rule-based oxidation states feel ambiguous when only experiments can decide. There are also truly dichotomous values to be decided by mere convenience.

Oxidation-state determination from resonance formulas is not straightforward[]

Seemingly ambiguous oxidation states are obtained on a set of resonance formulas of equal weights for a molecule of heteronuclear bonds where the atom connectivity does not correspond to the number of two-electron bonds dictated by the 8 − N rule. An example is S₂N₂ where four resonance formulas featuring one S=N double bond have oxidation states +2 and +4 on the two sulfur atoms, to be averaged to +3 because the two sulfur atoms are equivalent in this square-shaped molecule.

A physical measurement is needed to decide the oxidation state[]

This happens when a non-innocent ligand is present, of hidden or unexpected redox properties that could otherwise be assigned to the central atom. An example is the nickel dithiolate complex, Ni(S
₂C
₂H
₂)²⁻
₂.^[5]^{: 1056–1057}
When the redox ambiguity of a central atom and ligand yields dichotomous oxidation states of close stability, thermally induced tautomerism may result, as exemplified by manganese catecholate, Mn(C
6H
4O
2)
3.^[5]^{: 1057–1058} Assignment of such oxidation states in general requires spectroscopic,^[13] magnetic or structural data.
When the bond order has to be ascertained along with an isolated tandem of a heteronuclear and a homonuclear bond. An example is thiosulfate S
₂O²⁻
₃ with two oxidation-state alternatives (bond orders are in blue and formal charges in green):

The S–S distance in thiosulfate is needed to reveal that this bond order is very close to 1, as in the formula on the left.

Truly ambiguous oxidation states occur[]

When the electronegativity difference between two bonded atoms is very small (as in H₃PO₃ above). Two almost equivalent pairs of oxidation states, open for a choice, are obtained for these atoms.
When an electronegative p-block atom forms solely homonuclear bonds, the number of which differs from the number of two-electron bonds suggested by rules. Examples are homonuclear finite chains like N⁻
₃ (the central nitrogen connects two atoms with four two-electron bonds while only three two-electron bonds^[14] are required by 8 − N rule) or I⁻
₃ (the central iodine connects two atoms with two two-electron bonds while only one two-electron bond fulfills the 8 − N rule). A sensible approach is to distribute the ionic charge over the two outer atoms.^[5] Such a placement of charges in a polysulfide S²⁻
_n (where all inner sulfurs form two bonds, fulfilling the 8 − N rule) follows already from its Lewis structure.^[5]
When the isolated tandem of a heteronuclear and a homonuclear bond leads to a bonding compromise in between two Lewis structures of limiting bond orders. An example here is N₂O:

The typically-used oxidation state of nitrogen in N₂O is +1, which also obtains for both nitrogens by a molecular orbital approach.^[15] The formal charges on the right comply with electronegativities, and this implies an added ionic bonding contribution. Indeed, the estimated N−N and N−O bond orders are 2.76 and 1.9, respectively,^[5] approaching the formula of integer bond orders that would include the ionic contribution explicitly as a bond (in green):

Conversely, formal charges against electronegativities in a Lewis structure decrease the bond order of the corresponding bond. An example is carbon monoxide with a bond-order estimate of 2.6.^[16]

Fractional oxidation states[]

Fractional oxidation states are often used to represent the average oxidation state of several atoms of the same element in a structure. For example, the formula of magnetite is Fe
₃O
₄, implying an average oxidation state for iron of +8/3.^[17]^: 81–82 However, this average value may not be representative if the atoms are not equivalent. In a Fe
₃O
₄ crystal below 120 K (−153 °C), two-thirds of the cations are Fe³⁺
and one-third are Fe²⁺
, and the formula may be more specifically represented as FeO·Fe
₂O
₃.^[18]

Likewise, propane, C
₃H
₈, has been described as having a carbon oxidation state of −8/3.^[19] Again, this is an average value since the structure of the molecule is H
₃C−CH
₂−CH
₃, with the first and third carbon atoms each having an oxidation state of −3 and the central one −2.

An example with true fractional oxidation states for equivalent atoms is potassium superoxide, KO
₂. The diatomic superoxide ion O⁻
₂ has an overall charge of −1, so each of its two equivalent oxygen atoms is assigned an oxidation state of −1/2. This ion can be described as a resonance hybrid of two Lewis structures, where each oxygen has an oxidation state of 0 in one structure and −1 in the other.

For the cyclopentadienyl anion C
₅H⁻
₅, the oxidation state of C is −1 + −1/5 = −6/5. The −1 occurs because each carbon is bonded to one hydrogen atom (a less electronegative element), and the −1/5 because the total ionic charge of −1 is divided among five equivalent carbons. Again this can be described as a resonance hybrid of five equivalent structures, each having four carbons with oxidation state −1 and one with −2.

Examples of fractional oxidation states for carbon
Oxidation state	Example species
−6/5	C ₅H⁻ ₅
−6/7	C ₇H⁺ ₇
+3/2	C ₄O²⁻ ₄

Finally, fractional oxidation numbers should not be used in naming.^[20]^: 66 Red lead, Pb
₃O
₄, is represented as lead(II,IV) oxide, showing the actual two oxidation states of the nonequivalent lead atoms.

Elements with multiple oxidation states[]

Most elements have more than one possible oxidation state. For example, carbon has nine possible integer oxidation states from −4 to +4:

Integer oxidation states of carbon
Oxidation state	Example compound
−4	CH ₄
−3	C ₂H ₆
−2	C ₂H ₄, CH ₃Cl
−1	C ₂H ₂, C ₆H ₆, (CH ₂OH) ₂
0	HCHO, CH ₂Cl ₂
+1	OCHCHO, CHCl ₂CHCl ₂
+2	HCOOH, CHCl ₃
+3	HOOCCOOH, C ₂Cl ₆
+4	CCl ₄, CO ₂

Oxidation state in metals[]

Many compounds with luster and electrical conductivity maintain a simple stoichiometric formula; such as the golden TiO, blue-black RuO₂ or coppery ReO₃, all of obvious oxidation state. Ultimately, however, the assignment of the free metallic electrons to one of the bonded atoms has its limits and leads to unusual oxidation states. Simple examples are the LiPb and Cu₃Au ordered alloys, the composition and structure of which are largely determined by atomic size and packing factors. Should oxidation state be needed for redox balancing, it is best set to 0 for all atoms of such an alloy.

List of oxidation states of the elements[]

This is a list of known oxidation states of the chemical elements, excluding nonintegral values. The most common states appear in bold. The table is based on that of Greenwood and Earnshaw,^[21] with additions noted. Every element exists in oxidation state 0 when it is the pure non-ionized element in any phase, whether monatomic or polyatomic allotrope. The column for oxidation state 0 only shows elements known to exist in oxidation state 0 in compounds.

Noble gas

+1 Bold values are main oxidation states

hide v t Oxidation states of the elements
Element			Negative states						Positive states									Group	Notes
Element			−5	−4	−3	−2	−1	0	+1	+2	+3	+4	+5	+6	+7	+8	+9	Group	Notes
Z
1	hydrogen	H					−1		+1									1
2	helium	He																18
3	lithium	Li							+1									1	^[22]
4	beryllium	Be						0	+1	+2								2	^[23]^[24]
5	boron	B	−5				−1	0	+1	+2	+3							13	^[25]^[26]^[27]
6	carbon	C		−4	−3	−2	−1	0	+1	+2	+3	+4						14
7	nitrogen	N			−3	−2	−1		+1	+2	+3	+4	+5					15
8	oxygen	O				−2	−1	0	+1	+2								16
9	fluorine	F					−1	0										17	^[28]
10	neon	Ne																18
11	sodium	Na					−1		+1									1	^[22]
12	magnesium	Mg						0	+1	+2								2	^[29]^[30]
13	aluminium	Al				−2	−1		+1	+2	+3							13	^[31]^[32]^[33]
14	silicon	Si		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[34]
15	phosphorus	P			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[35]
16	sulfur	S				��2	−1	0	+1	+2	+3	+4	+5	+6				16
17	chlorine	Cl					−1		+1	+2	+3	+4	+5	+6	+7			17	^[36]
18	argon	Ar						0										18	^[37]
19	potassium	K					−1		+1									1	^[22]
20	calcium	Ca						0	+1	+2								2	^[38]^[39]
21	scandium	Sc						0	+1	+2	+3							3	^[40]^[41]^[42]
22	titanium	Ti				−2	−1	0	+1	+2	+3	+4						4	^[43]^[44]^[45]^[46]
23	vanadium	V			−3		−1	0	+1	+2	+3	+4	+5					5	^[44]
24	chromium	Cr		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[44]
25	manganese	Mn			−3	−2	−1	0	+1	+2	+3	+4	+5	+6	+7			7
26	iron	Fe		−4		−2	−1	0	+1	+2	+3	+4	+5	+6	+7			8	^[47]^[48]^[49]
27	cobalt	Co			−3		−1	0	+1	+2	+3	+4	+5					9	^[44]
28	nickel	Ni				−2	−1	0	+1	+2	+3	+4						10	^[50]
29	copper	Cu				−2		0	+1	+2	+3	+4						11	^[49]^[51]
30	zinc	Zn				−2		0	+1	+2								12	^[49]^[52]^[53]
31	gallium	Ga	−5	−4	−3	−2	−1		+1	+2	+3							13	^[32]^[54]^[55]
32	germanium	Ge		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[56]^[34]
33	arsenic	As			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[32]^[57]^[58]^[59]
34	selenium	Se				−2	−1		+1	+2	+3	+4	+5	+6				16	^[60]^[61]^[62]^[63]
35	bromine	Br					−1		+1		+3	+4	+5		+7			17
36	krypton	Kr						0	+1	+2								18
37	rubidium	Rb					−1		+1									1	^[22]
38	strontium	Sr						0	+1	+2								2	^[64]^[39]
39	yttrium	Y						0	+1	+2	+3							3	^[65]^[66]^[67]
40	zirconium	Zr				−2		0	+1	+2	+3	+4						4	^[44]^[68]^[69]
41	niobium	Nb			−3		−1	0	+1	+2	+3	+4	+5					5	^[44]^[70]^[71]
42	molybdenum	Mo		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[44]
43	technetium	Tc			−3		−1	0	+1	+2	+3	+4	+5	+6	+7			7
44	ruthenium	Ru		−4		−2		0	+1	+2	+3	+4	+5	+6	+7	+8		8	^[44]^[49]
45	rhodium	Rh			−3		−1	0	+1	+2	+3	+4	+5	+6				9	^[44]^[72]
46	palladium	Pd						0	+1	+2	+3	+4						10	^[73]^[74]
47	silver	Ag				−2	−1		+1	+2	+3							11	^[49]^[75]
48	cadmium	Cd				−2			+1	+2								12	^[49]^[76]
49	indium	In	−5			−2	−1		+1	+2	+3							13	^[32]^[77]^[78]
50	tin	Sn		−4	−3	−2	−1	0	+1	+2	+3	+4						14	^[32]^[79]^[80]^[34]
51	antimony	Sb			−3	−2	−1	0	+1	+2	+3	+4	+5					15	^[32]^[81]^[82]^[83]^[84]
52	tellurium	Te				−2	−1		+1	+2	+3	+4	+5	+6				16	^[32]^[85]^[86]^[87]
53	iodine	I					−1		+1		+3	+4	+5	+6	+7			17	^[88]^[89]
54	xenon	Xe						0		+2		+4		+6		+8		18	^[90]^[91]^[92]
55	caesium	Cs					−1		+1									1	^[22]
56	barium	Ba						0	+1	+2								2	^[93]^[39]
57	lanthanum	La						0	+1	+2	+3							n/a	^[65]^[94]
58	cerium	Ce								+2	+3	+4						n/a
59	praseodymium	Pr						0	+1	+2	+3	+4	+5					n/a	^[65]^[95]^[96]^[97]
60	neodymium	Nd						0		+2	+3	+4						n/a	^[65]^[98]
61	promethium	Pm								+2	+3							n/a	^[99]
62	samarium	Sm						0		+2	+3							n/a	^[65]
63	europium	Eu						0		+2	+3							n/a	^[65]
64	gadolinium	Gd						0	+1	+2	+3							n/a	^[65]
65	terbium	Tb						0	+1	+2	+3	+4						n/a	^[65]^[99]
66	dysprosium	Dy						0		+2	+3	+4						n/a	^[65]^[100]
67	holmium	Ho						0		+2	+3							n/a	^[65]^[99]
68	erbium	Er						0		+2	+3							n/a	^[65]^[99]
69	thulium	Tm						0		+2	+3							n/a	^[65]
70	ytterbium	Yb						0		+2	+3							n/a	^[65]
71	lutetium	Lu						0		+2	+3							3	^[65]^[99]
72	hafnium	Hf				−2		0	+1	+2	+3	+4						4	^[44]^[69]^[101]
73	tantalum	Ta			−3		−1	0	+1	+2	+3	+4	+5					5	^[44]^[71]
74	tungsten	W		−4		−2	−1	0	+1	+2	+3	+4	+5	+6				6	^[44]
75	rhenium	Re			−3		−1	0	+1	+2	+3	+4	+5	+6	+7			7
76	osmium	Os		−4		−2	−1	0	+1	+2	+3	+4	+5	+6	+7	+8		8	^[49]^[102]
77	iridium	Ir			−3		−1	0	+1	+2	+3	+4	+5	+6	+7	+8	+9	9	^[103]^[104]^[105]^[106]
78	platinum	Pt			−3	−2	−1	0	+1	+2	+3	+4	+5	+6				10	^[49]^[107]^[108]
79	gold	Au			−3	−2	−1	0	+1	+2	+3		+5					11	^[49]^[109]
80	mercury	Hg				−2			+1	+2								12	^[49]^[110]
81	thallium	Tl	−5			−2	−1		+1	+2	+3							13	^[32]^[111]^[112]^[113]
82	lead	Pb		−4		−2	−1		+1	+2	+3	+4						14	^[32]^[114]^[115]
83	bismuth	Bi			−3	−2	−1		+1	+2	+3	+4	+5					15	^[116]^[117]^[118]^[119]
84	polonium	Po				−2				+2		+4	+5	+6				16	^[120]
85	astatine	At					−1		+1		+3		+5		+7			17
86	radon	Rn								+2				+6				18	^[121]^[122]^[123]
87	francium	Fr							+1									1
88	radium	Ra								+2								2
89	actinium	Ac								+2	+3							n/a	^[124]
90	thorium	Th							+1	+2	+3	+4						n/a	^[125]^[126]
91	protactinium	Pa									+3	+4	+5					n/a
92	uranium	U							+1	+2	+3	+4	+5	+6				n/a	^[127]^[128]
93	neptunium	Np								+2	+3	+4	+5	+6	+7			n/a	^[129]
94	plutonium	Pu								+2	+3	+4	+5	+6	+7	+8		n/a	^[130]^[131]
95	americium	Am								+2	+3	+4	+5	+6	+7			n/a	^[132]
96	curium	Cm									+3	+4	+5	+6				n/a	^[133]^[134]^[135]^[136]
97	berkelium	Bk								+2	+3	+4	+5					n/a	^[133]^[134]^[137]^[138]^[139]
98	californium	Cf								+2	+3	+4	+5					n/a	^[133]^[134]
99	einsteinium	Es								+2	+3	+4						n/a	^[140]
100	fermium	Fm								+2	+3							n/a
101	mendelevium	Md								+2	+3							n/a
102	nobelium	No								+2	+3							n/a
103	lawrencium	Lr									+3							3
104	rutherfordium	Rf										+4						4
105	dubnium	Db											+5					5	^[141]
106	seaborgium	Sg						0						+6				6	^[142]^[143]
107	bohrium	Bh													+7			7	^[144]
108	hassium	Hs														+8		8	^[145]
109	meitnerium	Mt																9
110	darmstadtium	Ds																10
111	roentgenium	Rg																11
112	copernicium	Cn								+2								12	^[146]
113	nihonium	Nh																13
114	flerovium	Fl																14
115	moscovium	Mc																15
116	livermorium	Lv																16
117	tennessine	Ts																17
118	oganesson	Og																18

Early forms (octet rule)[]

A figure with a similar format was used by Irving Langmuir in 1919 in one of the early papers about the octet rule.^[147] The periodicity of the oxidation states was one of the pieces of evidence that led Langmuir to adopt the rule.

Use in nomenclature[]

The oxidation state in compound naming for transition metals and lanthanides and actinides is placed either as a right superscript to the element symbol in a chemical formula, such as Fe^III or in parentheses after the name of the element in chemical names, such as iron(III). For example, Fe
₂(SO
₄)
₃ is named iron(III) sulfate and its formula can be shown as Fe^III
₂(SO
₄)
₃. This is because a sulfate ion has a charge of −2, so each iron atom takes a charge of +3.

History of the oxidation state concept[]

Early days[]

Oxidation itself was first studied by Antoine Lavoisier, who defined it as the result of reactions with oxygen (hence the name).^[148]^[149] The term has since been generalized to imply a formal loss of electrons. Oxidation states, called oxidation grades by Friedrich Wöhler in 1835,^[150] were one of the intellectual stepping stones that Dmitri Mendeleev used to derive the periodic table. Jensen^[151] gives an overview of the history up to 1938.

Use in nomenclature[]

When it was realized that some metals form two different binary compounds with the same nonmetal, the two compounds were often distinguished by using the ending -ic for the higher metal oxidation state and the ending -ous for the lower. For example, FeCl₃ is ferric chloride and FeCl₂ is ferrous chloride. This system is not very satisfactory (although sometimes still used) because different metals have different oxidation states which have to be learned: ferric and ferrous are +3 and +2 respectively, but cupric and cuprous are +2 and +1, and stannic and stannous are +4 and +2. Also, there was no allowance for metals with more than two oxidation states, such as vanadium with oxidation states +2, +3, +4, and +5.^[17]^: 84

This system has been largely replaced by one suggested by Alfred Stock in 1919^[152] and adopted^[153] by IUPAC in 1940. Thus, FeCl₂ was written as iron(II) chloride rather than ferrous chloride. The Roman numeral II at the central atom came to be called the "Stock number" (now an obsolete term), and its value was obtained as a charge at the central atom after removing its ligands along with the electron pairs they shared with it.^[20]^: 147

Development towards the current concept[]

The term "oxidation state" in English chemical literature was popularized by Wendell Mitchell Latimer in his 1938 book about electrochemical potentials.^[154] He used it for the value (synonymous with the German term Wertigkeit) previously termed "valence", "polar valence" or "polar number"^[155] in English, or "oxidation stage" or indeed^[156]^[157] the "state of oxidation". Since 1938, the term "oxidation state" has been connected with electrochemical potentials and electrons exchanged in redox couples participating in redox reactions. By 1948, IUPAC used the 1940 nomenclature rules with the term "oxidation state",^[158]^[159] instead of the original^[153] valency. In 1948 Linus Pauling proposed that oxidation number could be determined by extrapolating bonds to being completely ionic in the direction of electronegativity.^[160] A full acceptance of this suggestion was complicated by the fact that the Pauling electronegativities as such depend on the oxidation state and that they may lead to unusual values of oxidation states for some transition metals. In 1990 IUPAC resorted to a postulatory (rule-based) method to determine the oxidation state.^[161] This was complemented by the synonymous term oxidation number as a descendant of the Stock number introduced in 1940 into the nomenclature. However, the terminology using "ligands"^[20]^: 147 gave the impression that oxidation number might be something specific to coordination complexes. This situation and the lack of a real single definition generated numerous debates about the meaning of oxidation state, suggestions about methods to obtain it and definitions of it. To resolve the issue, an IUPAC project (2008-040-1-200) was started in 2008 on the "Comprehensive Definition of Oxidation State", and was concluded by two reports^[5]^[4] and by the revised entries "Oxidation State"^[6] and "Oxidation Number"^[7] in the IUPAC Gold Book. The outcomes were a single definition of oxidation state and two algorithms to calculate it in molecular and extended-solid compounds, guided by Allen electronegativities that are independent of oxidation state.

References[]

^ Wang, G.; Zhou, M.; Goettel, G. T.; Schrobilgen, G. J.; Su, J.; Li, J.; Schlöder, T.; Riedel, S. (2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.
^ Xiao, Hai; Hu, Han-Shi; Schwarz, W. H. Eugen; Li, Jun (2010-08-26). "Theoretical Investigations of Geometry, Electronic Structure and Stability of UO6: Octahedral Uranium Hexoxide and Its Isomers". The Journal of Physical Chemistry A. 114 (33): 8837–8844. doi:10.1021/jp102107n. ISSN 1089-5639.
^ Schroeder, Melanie, Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden (in German), p. 139
^ Jump up to: ^a ^b ^c ^d Karen, P.; McArdle, P.; Takats, J. (2016). "Comprehensive definition of oxidation state (IUPAC Recommendations 2016)". Pure Appl. Chem. 88 (8): 831–839. doi:10.1515/pac-2015-1204. hdl:10852/59520. S2CID 99403810.
^ Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h Karen, P.; McArdle, P.; Takats, J. (2014). "Toward a comprehensive definition of oxidation state (IUPAC Technical Report)". Pure Appl. Chem. 86 (6): 1017–1081. doi:10.1515/pac-2013-0505.
^ Jump up to: ^a ^b ^c IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation state". doi:10.1351/goldbook.O04365
^ Jump up to: ^a ^b IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation number". doi:10.1351/goldbook.O04363
^ Jump up to: ^a ^b ^c Karen, Pavel (2015). "Oxidation State, A Long-Standing Issue!". Angewandte Chemie International Edition. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.
^ Hooydonk, G. (1974). O n an Ionic Approximation to Chemical Bonding, Zeitschrift für Naturforschung A, 29(5), 763-767. doi: https://doi.org/10.1515/zna-1974-0517
^ "Oxidation state". IUPAC Compendium of Chemical Terminology. 2009. doi:10.1351/goldbook.O04365. ISBN 978-0-9678550-9-7.
^ Pure and Applied Chemistry (2014), 86(6), 1017-1081 CODEN: PACHAS; ISSN: 0033-4545. English.
^ Muir, K. W.; Ibers, J. A. (1969). "The structure of chlorocarbonyl(sulfur dioxide)bis(triphenylphosphine)rhodium, RhCl(CO)(SO₂)(P(C₆H₅)₃)₂". Inorg. Chem. 8 (9): 1921–1928. doi:10.1021/ic50079a024.
^ Jørgensen, C. K. (1966). "Electric Polarizability, Innocent Ligands and Spectroscopic Oxidation States". Structure and Bonding. 1. Berlin: Springer-Verlag. pp. 234–248.
^ "The Two-Electron Bond". Chemistry LibreTexts. June 25, 2016.
^ Karen, P. (2015). "Oxidation state, a long-standing issue!". Angew. Chem. Int. Ed. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.
^ Martinie, R. J.; Bultema, J. J.; Wal, M. N. V.; Burkhart, B. J.; Griend, D. A. V.; DeCock, R. L. (2011). "Bond order and chemical properties of BF, CO, and N₂". J. Chem. Educ. 88 (8): 1094–1097. Bibcode:2011JChEd..88.1094M. doi:10.1021/ed100758t.
^ Jump up to: ^a ^b Petrucci, R. H.; Harwood, W. S.; Herring, F. G. (2002). General Chemistry (8th ed.). Prentice-Hall.^{[ISBN missing]}
^ Senn, M. S.; Wright, J. P.; Attfield, J. P. (2012). "Charge order and three-site distortions in the Verwey structure of magnetite" (PDF). Nature. 481 (7380): 173–6. Bibcode:2012Natur.481..173S. doi:10.1038/nature10704. hdl:20.500.11820/1b3bb558-52d5-419f-9944-ab917dc95f5e. PMID 22190035. S2CID 4425300.
^ Whitten, K. W.; Galley, K. D.; Davis, R. E. (1992). General Chemistry (4th ed.). Saunders. p. 147.^{[ISBN missing]}
^ Jump up to: ^a ^b ^c Connelly, N. G.; Damhus, T.; Hartshorn, R. M.; Hutton, A. T. Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005) (PDF). RSC Publishing.
^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 27–28. ISBN 978-0-08-037941-8.
^ Jump up to: ^a ^b ^c ^d ^e Na(−1), K(−1), Rb(−1), and Cs(−1) are known in alkalides; the table by Greenwood and Earnshaw shows −1 only for Na and also erroneously for Li; no lithides are described.
^ Be(0) has been observed; see "Beryllium(0) Complex Found". Chemistry Europe. 13 June 2016.
^ Be(I) has been observed in beryllium monohydride (BeH); see Shayesteh, A.; Tereszchuk, K.; Bernath, P. F.; Colin, R. (2003). "Infrared Emission Spectra of BeH and BeD" (PDF). J. Chem. Phys. 118 (3): 1158. Bibcode:2003JChPh.118.1158S. doi:10.1063/1.1528606. Archived from the original (PDF) on 2007-12-02. Retrieved 2007-12-10. and in [(CAAC)₂Be]^+• [CAAC = cyclic (alkyl)(amino)carbene], see Wang, Guocang; Walley, Jacob E.; Dickie, Diane E.; Pan, Sudip; Frenking, Gernot; Gilliard Jr., Robert G. (2020). "A Stable, Crystalline Beryllium Radical Cation". J. Am. Chem. Soc. 142 (10): 4560–4. doi:10.1021/jacs.9b13777. Retrieved 2020-11-17.
^ B(−5) has been observed in Al₃BC, see Schroeder, Melanie. "Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden" (in German). p. 139.
^ B(−1) has been observed in magnesium diboride (MgB₂), see Keeler, James; Wothers, Peter (2014). Chemical Structure and Reactivity: An Integrated Approach. Oxford University Press. ISBN 9780199604135.
^ B(0) has been observed in diborynes, see Braunschweig, H.; Dewhurst, R. D.; Hammond, K.; Mies, J.; Radacki, K.; Vargas, A. (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–2. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924.
^ Gold heptafluoride is calculated to be the pentafluoride with a molecular F₂ ligand. Himmel, Daniel; Riedel, Sebastian (2007). "After 20 Years, Theoretical Evidence That 'AuF₇' Is Actually AuF₅•F₂". Inorganic Chemistry. 46 (13): 5338–5342. doi:10.1021/ic700431s.
^ Low valent magnesium compounds with Mg(I) have been obtained using bulky ligands; see Green, S. P.; Jones C.; Stasch A. (December 2007). "Stable Magnesium(I) Compounds with Mg-Mg Bonds". Science. 318 (5857): 1754–1757. Bibcode:2007Sci...318.1754G. doi:10.1126/science.1150856. PMID 17991827.
^ Mg(0) has been synthesized in a compound containing a Na₂Mg₂²⁺ cluster coordinated to a bulky organic ligand; see Rösch, B.; Gentner, T. X.; Eyselein, J.; Langer, J.; Elsen, H.; Li, W.; Harder, S. (2021). "Strongly reducing magnesium(0) complexes". Nature. 592: 717–721. doi:10.1038/s41586-021-03401-w
^ Al(II) has been observed in aluminium(II) oxide (AlO); see Tyte, D.C. (1964). "Red (B2Π–A2σ) Band System of Aluminium Monoxide". Nature. 202 (4930): 383–384. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0, and in (R₂Al—AlR₂); see Uhl, Werner (2004). "Organoelement Compounds Possessing Al—Al, Ga—Ga, In—In, and Tl—Tl Single Bonds". Advances in Organometallic Chemistry. 51: 53–108. doi:10.1016/S0065-3055(03)51002-4.
^ Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ Negative oxidation states of p-block metals (Al, Ga, In, Sn, Tl, Pb, Bi, Po) and metalloids (Si, Ge, As, Sb, Te, At) may occur in Zintl phases, see: Riedel, Erwin, ed. (2007). Moderne Anorganische Chemie (in German). p. 259, and "Vorlesung Intermetallische Phasen § 6.2 Binäre Zintl-Phasen" (in German).
^ Al(−2) has been observed in Sr₁₄[Al₄]₂[Ge]₃, see Wemdorff, Marco; Röhr, Caroline (2007). "Sr₁₄[Al₄]₂[Ge]₃: Eine Zintl-Phase mit isolierten [Ge]^4–- und [Al₄]^8–-Anionen / Sr₁₄[Al₄]₂[Ge]₃: A Zintl Phase with Isolated [Ge]^4–- and [Al₄]^8– Anions". Zeitschrift für Naturforschung B (in German). 62 (10): 1227. doi:10.1515/znb-2007-1001.
^ Jump up to: ^a ^b ^c "New Type of Zero-Valent Tin Compound". Chemistry Europe. 27 August 2016.
^ P(0) has been observed, see Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; King, R. Bruce; Schaefer, Iii; Schleyer, Paul v. R.; Robinson, Gregory H. (2008). "Carbene-Stabilized Diphosphorus". Journal of the American Chemical Society. 130 (45): 14970–1. doi:10.1021/ja807828t. PMID 18937460.
^ The equilibrium Cl₂O₆⇌2ClO₃ is mentioned by Greenwood and Earnshaw, but it has been refuted, see Lopez, Maria; Juan E. Sicre (1990). "Physicochemical properties of chlorine oxides. 1. Composition, ultraviolet spectrum, and kinetics of the thermolysis of gaseous dichlorine hexoxide". J. Phys. Chem. 94 (9): 3860–3863. doi:10.1021/j100372a094., and Cl₂O₆ is actually chlorine(V,VII) oxide. However, ClO₃ has been observed, see Grothe, Hinrich; Willner, Helge (1994). "Chlorine Trioxide: Spectroscopic Properties, Molecular Structure, and Photochemical Behavior". Angew. Chem. Int. Ed. 33 (14): 1482–1484. doi:10.1002/anie.199414821.
^ Ar(0) has been observed in argon fluorohydride (HArF) and ArCF₂²⁺, see Lockyear, J.F.; Douglas, K.; Price, S.D.; Karwowska, M.; et al. (2010). "Generation of the ArCF₂²⁺ Dication". Journal of Physical Chemistry Letters. 1: 358. doi:10.1021/jz900274p.
^ Ca(I) has been observed; see Krieck, Sven; Görls, Helmar; Westerhausen, Matthias (2010). "Mechanistic Elucidation of the Formation of the Inverse Ca(I) Sandwich Complex [(thf)₃Ca(μ-C₆H₃-1,3,5-Ph₃)Ca(thf)₃] and Stability of Aryl-Substituted Phenylcalcium Complexes". Journal of the American Chemical Society. 132 (35): 12492–501. doi:10.1021/ja105534w. PMID 20718434.
^ Jump up to: ^a ^b ^c M(0); M = Ca, Sr, Ba has been observed in octacarbonyl complexes isolated in neon; see Wu, X.; Zhao, L.; Jin, J.; Pan, S.; Li, W.; Jin, X.; Wang, G.; Zhou, M.; Frenking, G. (2018). "Observation of alkaline earth complexes M(CO)8 (M = Ca, Sr, or Ba) that mimic transition metals". Science. 361 (6405): 912–916. doi:10.1126/science.aau0839
^ Sc(0) has been observed; see F. Geoffrey N. Cloke; Karl Khan & Robin N. Perutz (1991). "η-Arene complexes of scandium(0) and scandium(II)". J. Chem. Soc., Chem. Commun. (19): 1372–1373. doi:10.1039/C39910001372.
^ Sc(I) has been observed; see Polly L. Arnold; F. Geoffrey; N. Cloke; Peter B. Hitchcock & John F. Nixon (1996). "The First Example of a Formal Scandium(I) Complex: Synthesis and Molecular Structure of a 22-Electron Scandium Triple Decker Incorporating the Novel 1,3,5-Triphosphabenzene Ring". J. Am. Chem. Soc. 118 (32): 7630–7631. doi:10.1021/ja961253o.
^ Sc(II) has been observed; see Woen, David H.; Chen, Guo P.; Ziller, Joseph W.; Boyle, Timothy J.; Furche, Filipp; Evans, William J. (January 2017). "Solution Synthesis, Structure, and CO Reduction Reactivity of a Scandium(II) Complex". Angewandte Chemie International Edition. 56 (8): 2050–2053. doi:10.1002/anie.201611758. PMID 28097771.
^ Ti(I) has been observed in [Ti(η⁶-1,3,5-C₆H₃ⁱPr₃)2][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂); see Calderazzo, Fausto; Ferri, Isabella; Pampaloni, Guido; Englert, Ulli; Green, Malcolm L. H. (1997). "Synthesis of [Ti(η⁶-1,3,5-C₆H₃iPr₃)₂][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂), the First Titanium(I) Derivatives". Organometallics. 16 (14): 3100–3101. doi:10.1021/om970155o.
^ Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l Ti(−2), V(−3), Cr(−4), Co(−3), Zr(−2), Nb(−3), Mo(−4), Ru(−2), Rh(−3), Hf(−2), Ta(−3), and W(−4) occur in anionic binary metal carbonyls; see [1], p. 4 (in German); [2], pp. 97–100; [3], p. 239
^ Ti(−1) has been reported in [Ti(bipy)₃]⁻, but was later shown to be Ti(+3); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926. However, Ti(−1) occurs in [Ti(η-C₆H₆]⁻ and [Ti(η-C₆H₅CH₃)]⁻, see Bandy, J. A.; Berry, A.; Green, M. L. H.; Perutz, R. N.; Prout, K.; Verpeautz, J.-N. (1984). "Synthesis of anionic sandwich compounds: [Ti(η-C₆H₅R)₂]^– and the crystal structure of [K(18-crown-6)(µ-H)Mo(η-C₅H₅)₂]". Inorganic Chemistry. 52 (4): 729–731. doi:10.1039/C39840000729.
^ Jilek, Robert E.; Tripepi, Giovanna; Urnezius, Eugenijus; Brennessel, William W.; Young, Victor G. Jr.; Ellis, John E. (2007). "Zerovalent titanium–sulfur complexes. Novel dithiocarbamato derivatives of Ti(CO)₆: [Ti(CO)₄(S₂CNR₂)]⁻". Chem. Commun. (25): 2639–2641. doi:10.1039/B700808B. PMID 17579764.
^ Fe(VII) has been observed in [FeO₄]⁻; see Lu, Jun-Bo; Jian, Jiwen; Huang, Wei; Lin, Hailu; Zhou, Mingfei (2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO₄⁻". Physical Chemistry Chemical Physics. 18 (45): 31125–31131. Bibcode:2016PCCP...1831125L. doi:10.1039/C6CP06753K. PMID 27812577.
^ Fe(VIII) has been reported; see Yurii D. Perfiliev; Virender K. Sharma (2008). "Higher Oxidation States of Iron in Solid State: Synthesis and Their Mössbauer Characterization – Ferrates – ACS Symposium Series (ACS Publications)". Platinum Metals Review. 48 (4): 157–158. doi:10.1595/147106704X10801. However, its existence has been disputed.
^ Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j Fe(−4), Ru(−4), and Os(−4) have been observed in metal-rich compounds containing octahedral complexes [MIn_6−xSn_x]; Pt(−3) (as a dimeric anion [Pt–Pt]⁶⁻), Cu(−2), Zn(−2), Ag(−2), Cd(−2), Au(−2), and Hg(−2) have been observed (as dimeric and monomeric anions; dimeric ions were initially reported to be [T–T]²⁻ for Zn, Cd, Hg, but later shown to be [T–T]⁴⁻ for all these elements) in La₂Pt₂In, La₂Cu₂In, Ca₅Au₃, Ca₅Ag₃, Ca₅Hg₃, Sr₅Cd₃, Ca₅Zn₃(structure (AE²⁺)₅(T–T)⁴⁻T²⁻⋅4e⁻), Yb₃Ag₂, Ca₅Au₄, and Ca₃Hg₂; Au(–3) has been observed in ScAuSn and in other 18-electron half-Heusler compounds. See Changhoon Lee; Myung-Hwan Whangbo (2008). "Late transition metal anions acting as p-metal elements". Solid State Sciences. 10 (4): 444–449. Bibcode:2008SSSci..10..444K. doi:10.1016/j.solidstatesciences.2007.12.001. and Changhoon Lee; Myung-Hwan Whangbo; Jürgen Köhler (2010). "Analysis of Electronic Structures and Chemical Bonding of Metal-rich Compounds. 2. Presence of Dimer (T–T)^4– and Isolated T^2– Anions in the Polar Intermetallic Cr₅B₃-Type Compounds AE₅T₃ (AE = Ca, Sr; T = Au, Ag, Hg, Cd, Zn)". Zeitschrift für Anorganische und Allgemeine Chemie. 636 (1): 36–40. doi:10.1002/zaac.200900421.
^ Ni(−2) has been observed in Li₂[Ni(1,5-COD)₂], see Jonas, Klaus (1975). "Dilithium-Nickel-Olefin Complexes. Novel Bimetal Complexes Containing a Transition Metal and a Main Group Metal". Angew. Chem. Int. Ed. 14 (11): 752–753. doi:10.1002/anie.197507521. and Ellis, John E. (2006). "Adventures with Substances Containing Metals in Negative Oxidation States". Inorganic Chemistry. 45 (8): 3167–86. doi:10.1021/ic052110i. PMID 16602773.
^ Cu(0) has been observed in Cu(tris[2-(diisopropylphosphino)- phenyl]borane), see Moret, Marc-Etienne; Zhang, Limei; Peters, Jonas C. (2013). "A Polar Copper–Boron One-Electron σ-Bond". J. Am. Chem. Soc. 135 (10): 3792–3795. doi:10.1021/ja4006578. PMID 23418750.
^ Zn(0) has been observed; see Singh, Amit Pratap; Samuel, Prinson P.; Roesky, Herbert W.; Schwarzer, Martin C.; Frenking, Gernot; Sidhu, Navdeep S.; Dittrich, Birger (2013). "A Singlet Biradicaloid Zinc Compound and Its Nonradical Counterpart". J. Am. Chem. Soc. 135 (19): 7324–9. doi:10.1021/ja402351x. and Soleilhavoup, Michèle; Bertrand, Guy (2015). "Cyclic (Alkyl)(Amino)Carbenes (CAACs): Stable Carbenes on the Rise". Acc. Chem. Res. 48 (2): 256–266. doi:10.1021/ar5003494.
^ Zn(I) has been observed in decamethyldizincocene (Zn₂(η⁵–C₅Me₅)₂); see Resa, I.; Carmona, E.; Gutierrez-Puebla, E.; Monge, A. (2004). "Decamethyldizincocene, a Stable Compound of Zn(I) with a Zn-Zn Bond". Science. 305 (5687): 1136–8. Bibcode:2004Sci...305.1136R. doi:10.1126/science.1101356. PMID 15326350.
^ Ga(−2), Ga(−4), and Ga(−5) have been observed in the magnesium gallides MgGa, Mg₂Ga, and Mg₅Ga₂, respectively; see Patrick Hofmann. "Colture. Ein Programm zur interaktiven Visualisierung von Festkörperstrukturen sowie Synthese, Struktur und Eigenschaften von binären und ternären Alkali- und Erdalkalimetallgalliden" (PDF) (in German). p. 72.
^ Ga(−3) has been observed in LaGa, see Dürr, Ines; Bauer, Britta; Röhr, Caroline (2011). "Lanthan-Triel/Tetrel-ide La(Al,Ga)_x(Si,Ge)_1-x. Experimentelle und theoretische Studien zur Stabilität intermetallischer 1:1-Phasen" (PDF). Z. Naturforsch. (in German). 66b: 1107–1121.
^ Ge(−1), Ge(−2), and Ge(−3) have been observed in germanides; see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Germanium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. pp. 953–959. ISBN 978-3-11-012641-9.
^ As(0) has been observed; see Abraham, Mariham Y.; Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; Shaefer III, Henry F.; Schleyer, P. von R.; Robinson, Gregory H. (2010). "Carbene Stabilization of Diarsenic: From Hypervalency to Allotropy". Chemistry: a European Journal. 16 (2): 432–5. doi:10.1002/chem.200902840.
^ As(I) has been observed in (AsI); see Ellis, Bobby D.; MacDonald, Charles L. B. (2004). "Stabilized Arsenic(I) Iodide: A Ready Source of Arsenic Iodide Fragments and a Useful Reagent for the Generation of Clusters". Inorganic Chemistry. 43 (19): 5981–6. doi:10.1021/ic049281s. PMID 15360247.
^ As(IV) has been observed in (As(OH)₄) and HAsO-; see Kläning, Ulrik K.; Bielski, Benon H. J.; Sehested, K. (1989). "Arsenic(IV). A pulse-radiolysis study". Inorganic Chemistry. 28 (14): 2717–24. doi:10.1021/ic00313a007.
^ Se(−1) has been observed in diselenides(2−) (Se₂²⁻).
^ Se(I) has been observed in selenium(I) chloride (Se₂Cl₂); see "Selenium: Selenium(I) chloride compound data". WebElements.com. Retrieved 2007-12-10.
^ Se(III) has been observed in Se₂NBr₃; see Lau, Carsten; Neumüller, Bernhard; Vyboishchikov, Sergei F.; Frenking, Gernot; Dehnicke, Kurt; Hiller, Wolfgang; Herker, Martin (1996). "Se₂NBr₃, Se₂NCl₅, Se₂NCl⁻₆: New Nitride Halides of Selenium(III) and Selenium(IV)". Chemistry: A European Journal. 2 (11): 1393–1396. doi:10.1002/chem.19960021108.
^ Se(V) has been observed in SeO2- and HSeO2-; see Kläning, Ulrik K.; Sehested, K. (1986). "Selenium(V). A pulse radiolysis study". Inorganic Chemistry. 90 (21): 5460–4. doi:10.1021/j100412a112.
^ Sr(I) has been observed in (SrF); see P. Colarusso; Guo, B.; Zhang, K.-Q.; Bernath, P.F.; et al. (1996). "High-Resolution Infrared Emission Spectrum of Strontium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 175 (1): 158–171. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2012-03-08.
^ Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ Yttrium and all lanthanides except Ce and Pm have been observed in the oxidation state 0 in bis(1,3,5-tri-t-butylbenzene) complexes, see Cloke, F. Geoffrey N. (1993). "Zero Oxidation State Compounds of Scandium, Yttrium, and the Lanthanides". Chem. Soc. Rev. 22: 17–24. doi:10.1039/CS9932200017. and Arnold, Polly L.; Petrukhina, Marina A.; Bochenkov, Vladimir E.; Shabatina, Tatyana I.; Zagorskii, Vyacheslav V.; Cloke (2003-12-15). "Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation". Journal of Organometallic Chemistry. 688 (1–2): 49–55. doi:10.1016/j.jorganchem.2003.08.028.
^ Y(I) has been observed in (YBr); see "Yttrium: yttrium(I) bromide compound data". OpenMOPAC.net. Archived from the original on 2011-07-23. Retrieved 2007-12-10.
^ Y(II) has been observed in [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]; see MacDonald, M. R.; Ziller, J. W.; Evans, W. J. (2011). "Synthesis of a Crystalline Molecular Complex of Y²⁺, [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]". J. Am. Chem. Soc. 133 (40): 15914–17. doi:10.1021/ja207151y. PMID 21919538.
^ Zr(−1) has been reported in [Zr(bipy)₃]⁻ (see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 960. ISBN 978-0-08-037941-8. and Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Zirconium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1413. ISBN 978-3-11-012641-9.), but was later shown to be Zr(+4); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926.
^ Jump up to: ^a ^b Zr(0) and Hf(0) occur in (η⁶-(1,3,5-^tBu)₃C₆H₃)₂M (M=Zr, Hf) and [(η⁵-C₅R₅M(CO)₄]⁻, see Chirik, P. J.; Bradley, C. A. (2007). "4.06 - Complexes of Zirconium and Hafnium in Oxidation States 0 to ii". Comprehensive Organometallic Chemistry III. From Fundamentals to Applications. 4. Elsevier Ltd. pp. 697–739. doi:10.1016/B0-08-045047-4/00062-5.
^ Complexes of Nb(0) and Ta(0) have been observed, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (2003). "4.5.7. Niobium(0) and Tantalum(0)". In J. A. McCleverty; T.J. Meyer (eds.). Comprehensive Coordination Chemistry II: From Biology to Nanotechnology. 4 (2 ed.). Newnes. pp. 297–299. ISBN 978-0-08-091316-2.
^ Jump up to: ^a ^b Nb(I) and Ta(I) occur in CpNb(CO)₄ and CpTa(CO)₄, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Tantal". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1430. ISBN 978-3-11-012641-9. and King, R. Bruce (1969). Transition-Metal Organometallic Chemistry: An Introduction. Academic Press. p. 11. ISBN 978-0-32-315996-8.
^ George, G.N.; Klein, S.I.; Nixon, J.F. (1984). "Electron paramagnetic resonance spectroscopic studies on the zero-valent rhodium complex [Rh(P(OPrⁱ)₃)₄] at X-and Q-band frequencies". Chemical Physics Letters. 108 (6): 627–630. Bibcode:1984CPL...108..627G. doi:10.1016/0009-2614(84)85069-1.
^ Pd(I) has been observed; see Crabtree, R. H. (2002). "CHEMISTRY: A New Oxidation State for Pd?". Science. 295 (5553): 288–289. doi:10.1126/science.1067921. PMID 11786632.
^ Pd(III) has been observed; see Powers, D. C.; Ritter, T. (2011). Palladium(III) in Synthesis and Catalysis (PDF). Top. Organomet. Chem. Topics in Organometallic Chemistry. 35. pp. 129–156. Bibcode:2011hoso.book..129P. doi:10.1007/978-3-642-17429-2_6. ISBN 978-3-642-17428-5. PMC 3066514. PMID 21461129. Archived from the original (PDF) on June 12, 2013.
^ The Ag⁻ ion has been observed in metal ammonia solutions: see Tran, N. E.; Lagowski, J. J. (2001). "Metal Ammonia Solutions: Solutions Containing Argentide Ions". Inorganic Chemistry. 40 (5): 1067–68. doi:10.1021/ic000333x.
^ Cd(I) has been observed in cadmium(I) tetrachloroaluminate (Cd₂(AlCl₄)₂); see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Cadmium". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1056–1057. ISBN 978-3-11-007511-3.
^ In(–5) has been observed in La₃InGe, see Guloy, A. M.; Corbett, J. D. (1996). "Synthesis, Structure, and Bonding of Two Lanthanum Indium Germanides with Novel Structures and Properties". Inorganic Chemistry. 35 (9): 2616–22. doi:10.1021/ic951378e.
^ In(−2) has been observed in Na₂In, see [4], p. 69.
^ Sn(−3) has been observed in [Sn₂]⁶⁻, e.g. in (Ba₂)⁴⁺(Mg₄)⁸⁺Sn⁴⁻(Sn₂)⁶⁻Sn²⁻ (with square (Sn²⁻)_n sheets), see Papoian, Garegin A.; Hoffmann, Roald (2000). "Hypervalent Bonding in One, Two, and Three Dimensions: Extending the Zintl–Klemm Concept to Nonclassical Electron-Rich Networks". Angew. Chem. Int. Ed. 2000 (39): 2408–2448. doi:10.1002/1521-3773(20000717)39:14<2408::aid-anie2408>3.0.co;2-u. Retrieved 2015-02-23.
^ Sn(I) and Sn(III) have been observed in organotin compounds
^ Sb(−2) has been observed in [Sb₂]⁴⁻, e.g. in RbBa₄[Sb₂][Sb][O], see Boss, Michael; Petri, Denis; Pickhard, Frank; Zönnchen, Peter; Röhr, Caroline (2005). "Neue Barium-Antimonid-Oxide mit den Zintl-Ionen [Sb]³⁻, [Sb₂]⁴⁻ und ¹_∞[Sb_n]ⁿ⁻ / New Barium Antimonide Oxides containing Zintl Ions [Sb]³⁻, [Sb₂]⁴⁻ and ¹_∞[Sb_n]ⁿ⁻". Zeitschrift für Anorganische und Allgemeine Chemie (in German). 631 (6–7): 1181–1190. doi:10.1002/zaac.200400546.
^ Sb(0) has been observed, see Anastas Sidiropoulos. "Studies of N-heterocyclic Carbene (NHC) Complexes of the Main Group Elements" (PDF). p. 39.
^ Sb(I) and Sb(II) have been observed in organoantimony compounds; for Sb(I), see Šimon, Petr; de Proft, Frank; Jambor, Roman; Růžička, Aleš; Dostál, Libor (2010). "Monomeric Organoantimony(I) and Organobismuth(I) Compounds Stabilized by an NCN Chelating Ligand: Syntheses and Structures". Angewandte Chemie International Edition. 49 (32): 5468–5471. doi:10.1002/anie.201002209. PMID 20602393.
^ Sb(IV) has been observed in [SbCl]²⁻
, see Nobuyoshi Shinohara; Masaaki Ohsima (2000). "Production of Sb(IV) Chloro Complex by Flash Photolysis of the Corresponding Sb(III) and Sb(V) Complexes in CH3CN and CHCl3". Bulletin of the Chemical Society of Japan. 73 (7): 1599–1604. doi:10.1246/bcsj.73.1599.
^ Te(I) has been observed in tellurium iodide (TeI), see "Tellurium: tellurium iodide". WebElements.com. Retrieved 2015-02-23.
^ Te(III) has been observed in [Te(N(SiMe₃)₂)₂]⁺, see Heinze, Thorsten; Roesky, Herbert W.; Pauer, Frank; Stalke, Dietmar; Sheldrick, George M. (1991). "Synthesis and Structure of the First Tellurium(III) Radical Cation". Angewandte Chemie International Edition. 30 (12): 1678. doi:10.1002/anie.199116771. Retrieved 2015-02-23.
^ Te(V) is mentioned by Greenwood and Earnshaw, but they do not give any example of a Te(V) compound. What was long thought to be ditellurium decafluoride (Te₂F₁₀) is actually bis(pentafluorotelluryl) oxide, F₅TeOTeF₅: see Watkins, P. M. (1974). "Ditellurium decafluoride - A Continuing Myth". Journal of Chemical Education. 51 (9): 520–521. Bibcode:1974JChEd..51..520W. doi:10.1021/ed051p520. However, Te(V) has been observed in HTeO-, TeO-, HTeO2-, and TeO3-; see Kläning, Ulrik K.; Sehested, K. (2001). "Tellurium(V). A Pulse Radiolysis Study". The Journal of Physical Chemistry A. 105 (27): 6637–45. Bibcode:2001JPCA..105.6637K. doi:10.1021/jp010577i.
^ I(IV) has been observed in iodine dioxide (IO₂); see Pauling, Linus (1988). "Oxygen Compounds of Nonmetallic Elements". General Chemistry (3rd ed.). Dover Publications, Inc. p. 259. ISBN 978-0-486-65622-9.
^ I(VI) has been observed in IO₃, IO₄²⁻, H₅IO₆⁻, H₂IO₅²⁻, H₄IO₆²⁻, and HIO₅³⁻; see Kläning, Ulrik K.; Sehested, Knud; Wolff, Thomas (1981). "Laser flash photolysis and pulse radiolysis of iodate and periodate in aqueous solution. Properties of iodine(VI)". J. Chem. Soc., Faraday Trans. 1. 77 (7): 1707–18. doi:10.1039/F19817701707.
^ Xe compounds: see Xenon
^ Xe(0) has been observed in tetraxenonogold(II) (AuXe₄²⁺).
^ Xe(I) has been reported in xenon hexafluoroplatinate and xenon hexafluororhodate (see Pauling, Linus (1988). General Chemistry (3rd ed.). Dover Publications, Inc. p. 250. ISBN 978-0-486-65622-9.), however these compounds were later found to contain Xe(II).
^ Ba(I) has been observed in (BaF); see P. Colarusso; Guo, B.; Zhang, K.-Q.; Bernath, P.F.; et al. (1995). "High-Resolution Fourier Transform Infrared Emission Spectrum of Barium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 170: 59. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2005-03-10.
^ La(I) has been observed in (LaH); see Ram, R. S.; Bernath, P. F. (1996). "Fourier Transform Emission Spectroscopy of New Infrared Systems of LaH and LaD" (PDF). Journal of Molecular Spectroscopy. 104 (17): 6444. Bibcode:1996JChPh.104.6444R. doi:10.1063/1.471365. Archived from the original (PDF) on 2005-03-10.
^ Pr(I) has been observed in [PrB₄]⁻; see Chen, Xin; Chen, Teng-Teng; Li, Wang-Lu; Lu, Jun-Bo; Zhao, Li-Juan; Jian, Tian; Hu, Han-Shi; Wang, Lai-Sheng; Li, Jun (2018-12-13). "Lanthanides with Unusually Low Oxidation States in the PrB₃^– and PrB₄^– Boride Clusters". Inorganic Chemistry. 58 (1): 411–418. doi:10.1021/acs.inorgchem.8b02572. PMID 30543295.
^ Pr(V) has been observed in [PrO₂]⁺; see Zhang, Qingnan; Hu, Shu-Xian; Qu, Hui; Su, Jing; Wang, Guanjun; Lu, Jun-Bo; Chen, Mohua; Zhou, Mingfei; Li, Jun (2016-06-06). "Pentavalent Lanthanide Compounds: Formation and Characterization of Praseodymium(V) Oxides". Angewandte Chemie International Edition. 55 (24): 6896–6900. doi:10.1002/anie.201602196. ISSN 1521-3773. PMID 27100273.
^ Hu, Shu-Xian; Jian, Jiwen; Su, Jing; Wu, Xuan; Li, Jun; Zhou, Mingfei (2017). "Pentavalent lanthanide nitride-oxides: NPrO and NPrO− complexes with N≡Pr triple bonds". Chemical Science. 8 (5): 4035–4043. doi:10.1039/C7SC00710H. ISSN 2041-6520. PMC 5434915. PMID 28580119.
^ Nd(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5
^ Jump up to: ^a ^b ^c ^d ^e All the lanthanides (La–Lu) in the +2 oxidation state have been observed (except La, Gd, Lu) in dilute, solid solutions of dihalides of these elements in alkaline earth dihalides (see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5) and (except Pm) in organometallic molecular complexes, see Lanthanides Topple Assumptions and Meyer, G. (2014). "All the Lanthanides Do It and Even Uranium Does Oxidation State +2". Angewandte Chemie International Edition. 53 (14): 3550–51. doi:10.1002/anie.201311325. PMID 24616202.. Additionally, all the lanthanides (La–Lu) form dihydrides (LnH₂), dicarbides (LnC₂), monosulfides (LnS), monoselenides (LnSe), and monotellurides (LnTe), but for most elements these compounds have Ln³⁺ ions with electrons delocalized into conduction bands, e. g. Ln³⁺(H⁻)₂(e⁻).
^ Dy(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5
^ Hf(I) has been observed in hafnium monobromide (HfBr), see Marek, G.S.; Troyanov, S.I.; Tsirel'nikov, V.I. (1979). "Кристаллическое строение и термодинамические характеристики монобромидов циркония и гафния / Crystal structure and thermodynamic characteristics of monobromides of zirconium and hafnium". Журнал неорганической химии / Russian Journal of Inorganic Chemistry (in Russian). 24 (4): 890–893.
^ Os(−1) has been observed in Na[Os(CO)
₁₃]; see Krause, J.; Siriwardane, Upali; Salupo, Terese A.; Wermer, Joseph R.; Knoeppel, David W.; Shore, Sheldon G. (1993). "Preparation of [Os₃(CO)₁₁]²⁻ and its reactions with Os₃(CO)₁₂; structures of [Et₄N] [HOs₃(CO)₁₁] and H₂OsS₄(CO)". Journal of Organometallic Chemistry. 454: 263–271. doi:10.1016/0022-328X(93)83250-Y. and Carter, Willie J.; Kelland, John W.; Okrasinski, Stanley J.; Warner, Keith E.; Norton, Jack R. (1982). "Mononuclear hydrido alkyl carbonyl complexes of osmium and their polynuclear derivatives". Inorganic Chemistry. 21 (11): 3955–3960. doi:10.1021/ic00141a019.
^ Ir(−3) has been observed in Ir(CO)₃³⁻; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1117. ISBN 978-0-08-037941-8.
^ Ir(VII) has been observed in [(η²-O₂)IrO₂]⁺; see C&EN: Iridium dressed to the nines.
^ Ir(VIII) has been observed in iridium tetroxide (IrO₄); see Gong, Yu; Zhou, Mingfei; Kaupp, Martin; Riedel, Sebastian (2009). "Formation and Characterization of the Iridium Tetroxide Molecule with Iridium in the Oxidation State +VIII". Angewandte Chemie International Edition. 48 (42): 7879–7883. doi:10.1002/anie.200902733. PMID 19593837.
^ Ir(IX) has been observed in IrO⁺
₄; see Wang, Guanjun; Zhou, Mingfei; Goettel, James T.; Schrobilgen, Gary G.; Su, Jing; Li, Jun; Schlöder, Tobias; Riedel, Sebastian (21 August 2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786.
^ Pt(−1) and Pt(−2) have been observed in the barium platinides Ba₂Pt and BaPt, respectively: see Karpov, Andrey; Konuma, Mitsuharu; Jansen, Martin (2006). "An experimental proof for negative oxidation states of platinum: ESCA-measurements on barium platinides". Chemical Communications (8): 838–840. doi:10.1039/b514631c. PMID 16479284.
^ Pt(I) and Pt(III) have been observed in bimetallic and polymetallic species; see Kauffman, George B.; Thurner, Joseph J.; Zatko, David A. (1967). Ammonium Hexachloroplatinate(IV). Inorganic Syntheses. 9. pp. 182–185. doi:10.1002/9780470132401.ch51. ISBN 978-0-470-13240-1.
^ Au(0) has been observed, see Mézaille, Nicolas; Avarvari, Narcis; Maigrot, Nicole; Ricard, Louis; Mathey, François; Le Floch, Pascal; Cataldo, Laurent; Berclaz, Théo; Geoffroy, Michel (1999). "Gold(I) and Gold(0) Complexes of Phosphinine‐Based Macrocycles". Angewandte Chemie International Edition (21): 3194–3197. doi:10.1002/(SICI)1521-3773(19991102)38:21<3194::AID-ANIE3194>3.0.CO;2-O.
^ Hg(IV) has been reported in mercury(IV) fluoride (HgF₄); see Xuefang Wang; Lester Andrews; Sebastian Riedel; Martin Kaupp (2007). "Mercury Is a Transition Metal: The First Experimental Evidence for HgF₄". Angew. Chem. Int. Ed. 46 (44): 8371–8375. doi:10.1002/anie.200703710. PMID 17899620. However, it could not be confirmed by later experiments; see Is mercury a transition metal? Archived 2016-10-12 at the Wayback Machine
^ Tl(−5) has been observed in Na₂₃K₉Tl_15.3, see Dong, Z.-C.; Corbett, J. D. (1996). "Na₂₃K₉Tl_15.3: An Unusual Zintl Compound Containing Apparent Tl₅⁷⁻, Tl₄⁸⁻, Tl₃⁷⁻, and Tl⁵⁻ Anions". Inorganic Chemistry. 35 (11): 3107–12. doi:10.1021/ic960014z.
^ Tl(−1) has been observed in (CsTl); see King, R. B.; Schleyer, R. (2004). "Theory and concepts in main-group cluster chemistry". In Driess, M.; Nöth, H. (eds.). Molecular clusters of the main group elements. Wiley-VCH, Chichester. p. 19. ISBN 978-3-527-61437-0.
^ Tl(+2) has been observed in ([(Me₃Si)Si]₂Tl—Tl[Si(SiMe₃)]₂), see Sonja Henkel; Dr. Karl Wilhelm Klinkhammer; Dr. Wolfgang Schwarz (1994). "Tetrakis(hypersilyl)dithallium(Tl—Tl): A Divalent Thallium Compound". Angew. Chem. Int. Ed. 33 (6): 681–683. doi:10.1002/anie.199406811.
^ Pb(−2) has been observed in BaPb, see Ferro, Riccardo (2008). Nicholas C. Norman (ed.). Intermetallic Chemistry. Elsevier. p. 505. ISBN 978-0-08-044099-6. and Todorov, Iliya; Sevov, Slavi C. (2004). "Heavy-Metal Aromatic Rings: Cyclopentadienyl Anion Analogues Sn₅⁶⁻ and Pb₅⁶⁻ in the Zintl Phases Na₈BaPb₆, Na₈BaSn₆, and Na₈EuSn₆". Inorganic Chemistry. 43 (20): 6490–94. doi:10.1021/ic000333x.
^ Pb(+1) and Pb(+3) have been observed in organolead compounds, e.g. hexamethyldiplumbane Pb₂(CH₃)₆; for Pb(I), see Siew-Peng Chia; Hong-Wei Xi; Yongxin Li; Kok Hwa Lim; Cheuk-Wai So (2013). "A Base-Stabilized Lead(I) Dimer and an Aromatic Plumbylidenide Anion". Angew. Chem. Int. Ed. 52 (24): 6298–6301. doi:10.1002/anie.201301954. PMID 23629949.
^ Bi(−2) and Bi(−1) occur in Zintl phases, e.g. (Ca²⁺)₂₂[Bi₄]⁴⁻([Bi₂]⁴⁻)₄[Bi³⁻]₈; see Ponou, Siméon (2006). "Germanides, Germanide-Tungstate Double Salts and Substitution Effects in Zintl Phases". Technische Universität München. Lehrstuhl für Anorganische Chemie mit Schwerpunkt Neue Materialien. p. 68.
^ Bi(I) has been observed in (BiBr) and (BiI); see Godfrey, S. M.; McAuliffe, C. A.; Mackie, A. G.; Pritchard, R. G. (1998). Nicholas C. Norman (ed.). Chemistry of arsenic, antimony, and bismuth. Springer. pp. 67–84. ISBN 978-0-7514-0389-3.
^ Bi(+2) has been observed in (R₂Bi—BiR₂), see Arthur J. Ashe III (1990). Thermochromic Distibines and Dibismuthines. Advances in Organometallic Chemistry. 30. pp. 77–97. doi:10.1016/S0065-3055(08)60499-2. ISBN 9780120311309.
^ Bi(IV) has been observed; see A. I. Aleksandrov, I. E. Makarov (1987). "Formation of Bi(II) and Bi(IV) in aqueous hydrochloric solutions of Bi(III)". Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science. 36 (2): 217��220. doi:10.1007/BF00959349.
^ Po(V) has been observed in (PoO+); see Thayer, John S. (2010). "Relativistic Effects and the Chemistry of the Heavier Main Group Elements". Relativistic Methods for Chemists. p. 78. doi:10.1007/978-1-4020-9975-5_2. ISBN 978-1-4020-9974-8.
^ Rn(II) has been observed in radon difluoride (RnF₂); see Stein, L. (1970). "Ionic Radon Solution". Science. 168 (3929): 362–4. Bibcode:1970Sci...168..362S. doi:10.1126/science.168.3929.362. PMID 17809133. and Kenneth S. Pitzer (1975). "Fluorides of radon and element 118". J. Chem. Soc., Chem. Commun. (18): 760b–761. doi:10.1039/C3975000760b.
^ Rn(IV) is reported by Greenwood and Earnshaw, but is not known to exist; see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.
^ Rn(VI) is known in radon trioxide (RnO₃); see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.
^ Ac(II) is known in Actinium(II) hydride (AcH₂); see Farr, J.; Giorgi, A. L.; Bowman, M. G.; Money, R. K. (1961). "The crystal structure of actinium metal and actinium hydride". Journal of Inorganic and Nuclear Chemistry. 18: 42–47. doi:10.1016/0022-1902(61)80369-2.
^ Th(I) is known in thorium(I) bromide (ThBr); see Wickleder, Mathias S.; Fourest, Blandine; Dorhout, Peter K. (2006). "Thorium". In Morss, Lester R.; Edelstein, Norman M.; Fuger, Jean (eds.). The Chemistry of the Actinide and Transactinide Elements (PDF). 3 (3rd ed.). Dordrecht, the Netherlands: Springer. pp. 52–160. doi:10.1007/1-4020-3598-5_3. ISBN 978-1-4020-3555-5. Archived from the original (PDF) on 2016-03-07.
^ Th(II) and Th(III) are observed in [Th^II{η⁵-C₅H₃(SiMe₃)₂}₃]⁻ and [Th^III{η⁵-C₅H₃(SiMe₃)₂}₃], see Langeslay, Ryan R.; Fieser, Megan E.; Ziller, Joseph W.; Furche, Philip; Evans, William J. (2015). "Synthesis, structure, and reactivity of crystalline molecular complexes of the {[C₅H₃(SiMe₃)₂]₃Th}¹⁻ anion containing thorium in the formal +2 oxidation state". Chem. Sci. 6 (1): 517–521. doi:10.1039/C4SC03033H. PMC 5811171. PMID 29560172.
^ U(I) has been observed in (UF) and (UCl), see Sykes, A. G. (1990). "Compounds of Thorium and Uranium". Advances in Inorganic Chemistry. 34. Academic Press. pp. 87–88. ISBN 978-0-12-023634-3. Retrieved 22 March 2015.
^ U(II) has been observed in [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U], see MacDonald, Matthew R.; Fieser, Megan E.; Bates, Jefferson E.; Ziller, Joseph W.; Furche, Filipp; Evans, William J. (2013). "Identification of the +2 Oxidation State for Uranium in a Crystalline Molecular Complex, [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U]". J. Am. Chem. Soc. 135 (36): 13310–13313. doi:10.1021/ja406791t. PMID 23984753.
^ Np(II), (III) and (IV) have been observed, see Dutkiewicz, Michał S.; Apostolidis, Christos; Walter, Olaf; Arnold, Polly L (2017). "Reduction chemistry of neptunium cyclopentadienide complexes: from structure to understanding". Chem. Sci. 8 (4): 2553–2561. doi:10.1039/C7SC00034K. PMC 5431675. PMID 28553487.
^ Pu(II) has been observed in {Pu[C₅H₃(SiMe₃)₂]₃}−; see Windorff, Cory J.; Chen, Guo P; Cross, Justin N; Evans, William J.; Furche, Filipp; Gaunt, Andrew J.; Janicke, Michael T.; Kozimor, Stosh A.; Scott, Brian L. (2017). "Identification of the Formal +2 Oxidation State of Plutonium: Synthesis and Characterization ofref name="curium5" {Pu^II[C₅H₃(SiMe₃)₂]₃}−". J. Am. Chem. Soc. 139 (11): 3970–3973. doi:10.1021/jacs.7b00706. PMID 28235179.
^ Pu(VIII) has been observed in PuO
₄; see Nikonov, M. V.; Kiselev, Yu. M.; Tananaev, I. G.; Myasoedov, B. F. (March 2011). "Plutonium volatility in ozonization of alkaline solutions of Pu(VI) hydroxo complexes". Doklady Chemistry. 437 (1): 69–71. doi:10.1134/S0012500811030104. Also see Kiselev, Yu. M.; Nikonov, M. V.; Dolzhenko, V. D.; Ermilov, A. Yu.; Tananaev, I. G.; Myasoedov, B. F. (17 January 2014). "On existence and properties of plutonium(VIII) derivatives". Radiochimica Acta. 102 (3). doi:10.1515/ract-2014-2146.
^ Am(VII) has been observed in AmO5-; see Americium, Das Periodensystem der Elemente für den Schulgebrauch (The periodic table of elements for schools) chemie-master.de (in German), Retrieved 28 November 2010 and Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1265. ISBN 978-0-08-037941-8.
^ Jump up to: ^a ^b ^c Cm(V), Bk(V), and Cf(V) have been observed in BkO₂⁺, CfO₂⁺, CmO₂(NO₃)₂⁻, BkO₂(NO₃)₂⁻, and CfO₂(NO₃)₂⁻; see Dau, Phuong Diem; Vasiliu, Monica; Peterson, Kirk A; Dixon, David A; Gibsoon, John K (October 2017). "Remarkably High Stability of Late Actinide Dioxide Cations: Extending Chemistry to Pentavalent Berkelium and Californium". Chemistry - A European Journal. 23 (68): 17369–17378. doi:10.1002/chem.201704193. PMID 29024093.
^ Jump up to: ^a ^b ^c Kovács, Attila; Dau, Phuong D.; Marçalo, Joaquim; Gibson, John K. (2018). "Pentavalent Curium, Berkelium, and Californium in Nitrate Complexes: Extending Actinide Chemistry and Oxidation States". Inorg. Chem. American Chemical Society. 57 (15): 9453–9467. doi:10.1021/acs.inorgchem.8b01450. PMID 30040397.
^ Cm(VI) has been observed in (CmO₃) and dioxidocurium(2+) (CmO2+); see Domanov, V. P.; Lobanov, Yu. V. (October 2011). "Formation of volatile curium(VI) trioxide CmO₃". Radiochemistry. 53 (5): 453–6. doi:10.1134/S1066362211050018.
^ Cm(VIII) has been reported to possibly occur in (CmO₄); see Domanov, V. P. (January 2013). "Possibility of generation of octavalent curium in the gas phase in the form of volatile tetraoxide CmO₄". Radiochemistry. 55 (1): 46–51. doi:10.1134/S1066362213010098. However, new experiments seem to indicate its nonexistence: Zaitsevskii, Andréi; Schwarz, W H Eugen (April 2014). "Structures and stability of AnO4 isomers, An = Pu, Am, and Cm: a relativistic density functional study". Physical Chemistry Chemical Physics. 2014 (16): 8997–9001. Bibcode:2014PCCP...16.8997Z. doi:10.1039/c4cp00235k. PMID 24695756.
^ Peterson, J. R.; Hobart, D. E. (1984). "The Chemistry of Berkelium". In Emeléus, Harry Julius (ed.). Advances in inorganic chemistry and radiochemistry. 28. Academic Press. pp. 29–64. doi:10.1016/S0898-8838(08)60204-4. ISBN 978-0-12-023628-2.
^ Peterson 1984, p. 55.
^ Sullivan, Jim C.; Schmidt, K. H.; Morss, L. R.; Pippin, C. G.; Williams, C. (1988). "Pulse radiolysis studies of berkelium(III): preparation and identification of berkelium(II) in aqueous perchlorate media". Inorganic Chemistry. 27 (4): 597. doi:10.1021/ic00277a005.
^ Es(IV) is known in (EsF₄); see Kleinschmidt, P (1994). "Thermochemistry of the actinides". Journal of Alloys and Compounds. 213–214: 169–172. doi:10.1016/0925-8388(94)90898-2.
^ Db(V) has been observed in dubnium pentachloride (DbCl₅); see H. W. Gäggeler (2007). "Gas Phase Chemistry of Superheavy Elements" (PDF). Paul Scherrer Institute. pp. 26–28. Archived from the original (PDF) on 2012-02-20.
^ Sg(VI) has been observed in seaborgium oxide hydroxide (SgO₂(OH)₂); see Huebener, S.; Taut, S.; Vahle, A.; Dressler, R.; Eichler, B.; Gäggeler, H. W.; Jost, D.T.; Piguet, D.; et al. (2001). "Physico-chemical characterization of seaborgium as oxide hydroxide" (PDF). Radiochim. Acta. 89 (11–12_2001): 737–741. doi:10.1524/ract.2001.89.11-12.737. Archived from the original (PDF) on 2014-10-25.
^ Sg(0) has been observed in seaborgium hexacarbonyl (Sg(CO)₆); see Even, J.; Yakushev, A.; Dullmann, C. E.; Haba, H.; Asai, M.; Sato, T. K.; Brand, H.; Di Nitto, A.; Eichler, R.; Fan, F. L.; Hartmann, W.; Huang, M.; Jager, E.; Kaji, D.; Kanaya, J.; Kaneya, Y.; Khuyagbaatar, J.; Kindler, B.; Kratz, J. V.; Krier, J.; Kudou, Y.; Kurz, N.; Lommel, B.; Miyashita, S.; Morimoto, K.; Morita, K.; Murakami, M.; Nagame, Y.; Nitsche, H.; et al. (2014). "Synthesis and detection of a seaborgium carbonyl complex". Science. 345 (6203): 1491–3. Bibcode:2014Sci...345.1491E. doi:10.1126/science.1255720. PMID 25237098.
^ Bh(VII) has been observed in bohrium oxychloride (BhO₃Cl); see "Gas chemical investigation of bohrium (Bh, element 107)" Archived 2008-02-28 at the Wayback Machine, Eichler et al., GSI Annual Report 2000. Retrieved on 2008-02-29
^ Hs(VIII) has been observed in hassium tetroxide (HsO₄); see "Chemistry of Hassium" (PDF). Gesellschaft für Schwerionenforschung mbH. 2002. Retrieved 2007-01-31.
^ Cn(II) has been observed in copernicium selenide (CnSe); see "Annual Report 2015: Laboratory of Radiochemistry and Environmental Chemistry" (PDF). Paul Scherrer Institute. 2015. p. 3.
^ Langmuir, Irving (1919). "The arrangement of electrons in atoms and molecules". J. Am. Chem. Soc. 41 (6): 868–934. doi:10.1021/ja02227a002.
^ "Antoine Laurent Lavoisier The Chemical Revolution - Landmark - American Chemical Society". American Chemical Society. Retrieved 14 July 2018.
^ "Lavoisier on Elements". Chem125-oyc.webspace.yale.edu. Retrieved 14 July 2018.
^ Wöhler, F. (1835). Grundriss der Chemie: Unorganische Chemie [Foundations of Chemistry: Inorganic Chemistry]. Berlin: Duncker und Humblot. p. 4.
^ Jensen, W. B. (2007). "the origin of the oxidation-state concept". J. Chem. Educ. 84 (9): 1418–1419. Bibcode:2007JChEd..84.1418J. doi:10.1021/ed084p1418.
^ Stock, A. (1919). "Einige Nomenklaturfragen der anorganischen Chemie" [Some nomenclature issues of inorganic chemistry]. Angew. Chem. 32 (98): 373–374. doi:10.1002/ange.19190329802.
^ Jump up to: ^a ^b Jorissen, W. P.; Bassett, H.; Damiens, A.; Fichter, F.; Rémy, H. (1941). "Rules for naming inorganic compounds". J. Am. Chem. Soc. 63: 889–897. doi:10.1021/ja01849a001.
^ Latimer, W. M. (1938). The Oxidation States of the Elements and their Potentials in Aqueous Solutions (1st ed.). Prentice-Hall.
^ Bray, W. C.; Branch, G. E. K. (1913). "Valence and tautomerism". J. Am. Chem. Soc. 35 (10): 1440–1447. doi:10.1021/ja02199a003.
^ Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, I. The oxidation and reduction reactions". J. Am. Chem. Soc. 57 (7): 1221–1229. doi:10.1021/ja01310a018.
^ Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, II. The oxidation state of argentic salts". J. Am. Chem. Soc. 57 (7): 1229–1237. doi:10.1021/ja01310a019.
^ Fernelius, W. C. (1948). "Some problems of inorganic nomenclature". Chem. Eng. News. 26: 161–163. doi:10.1021/cen-v026n003.p161.
^ Fernelius, W. C.; Larsen, E. M.; Marchi, L. E.; Rollinson, C. L. (1948). "Nomenclature of coördination compounds". Chem. Eng. News. 26 (8): 520–523. doi:10.1021/cen-v026n008.p520.
^ Pauling, L. (1948). "The modern theory of valency". J. Chem. Soc. 1948: 1461–1467. doi:10.1039/JR9480001461. PMID 18893624.
^ Calvert, J. G. (1990). "IUPAC Recommendation 1990". Pure Appl. Chem. 62: 2204. doi:10.1351/pac199062112167.

[1] Wang, G.; Zhou, M.; Goettel, G. T.; Schrobilgen, G. J.; Su, J.; Li, J.; Schlöder, T.; Riedel, S. (2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786. S2CID 4463905.

[2] Xiao, Hai; Hu, Han-Shi; Schwarz, W. H. Eugen; Li, Jun (2010-08-26). "Theoretical Investigations of Geometry, Electronic Structure and Stability of UO6: Octahedral Uranium Hexoxide and Its Isomers". The Journal of Physical Chemistry A. 114 (33): 8837–8844. doi:10.1021/jp102107n. ISSN 1089-5639.

[3] Schroeder, Melanie, Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden (in German), p. 139

[10.1515/pac-2015-1204-4] Jump up to: ^a ^b ^c ^d Karen, P.; McArdle, P.; Takats, J. (2016). "Comprehensive definition of oxidation state (IUPAC Recommendations 2016)". Pure Appl. Chem. 88 (8): 831–839. doi:10.1515/pac-2015-1204. hdl:10852/59520. S2CID 99403810.

[10.1515/pac-2013-0505-5] Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h Karen, P.; McArdle, P.; Takats, J. (2014). "Toward a comprehensive definition of oxidation state (IUPAC Technical Report)". Pure Appl. Chem. 86 (6): 1017–1081. doi:10.1515/pac-2013-0505.

[goldbookoxstate-6] Jump up to: ^a ^b ^c IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation state". doi:10.1351/goldbook.O04365

[goldbookoxnumber-7] Jump up to: ^a ^b IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Oxidation number". doi:10.1351/goldbook.O04363

[doi.org-8] Jump up to: ^a ^b ^c Karen, Pavel (2015). "Oxidation State, A Long-Standing Issue!". Angewandte Chemie International Edition. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.

[9] Hooydonk, G. (1974). O n an Ionic Approximation to Chemical Bonding, Zeitschrift für Naturforschung A, 29(5), 763-767. doi: https://doi.org/10.1515/zna-1974-0517

[10] "Oxidation state". IUPAC Compendium of Chemical Terminology. 2009. doi:10.1351/goldbook.O04365. ISBN 978-0-9678550-9-7.

[11] Pure and Applied Chemistry (2014), 86(6), 1017-1081 CODEN: PACHAS; ISSN: 0033-4545. English.

[12] Muir, K. W.; Ibers, J. A. (1969). "The structure of chlorocarbonyl(sulfur dioxide)bis(triphenylphosphine)rhodium, RhCl(CO)(SO₂)(P(C₆H₅)₃)₂". Inorg. Chem. 8 (9): 1921–1928. doi:10.1021/ic50079a024.

[13] Jørgensen, C. K. (1966). "Electric Polarizability, Innocent Ligands and Spectroscopic Oxidation States". Structure and Bonding. 1. Berlin: Springer-Verlag. pp. 234–248.

[14] "The Two-Electron Bond". Chemistry LibreTexts. June 25, 2016.

[15] Karen, P. (2015). "Oxidation state, a long-standing issue!". Angew. Chem. Int. Ed. 54 (16): 4716–4726. doi:10.1002/anie.201407561. PMC 4506524. PMID 25757151.

[16] Martinie, R. J.; Bultema, J. J.; Wal, M. N. V.; Burkhart, B. J.; Griend, D. A. V.; DeCock, R. L. (2011). "Bond order and chemical properties of BF, CO, and N₂". J. Chem. Educ. 88 (8): 1094–1097. Bibcode:2011JChEd..88.1094M. doi:10.1021/ed100758t.

[Petrucci-17] Jump up to: ^a ^b Petrucci, R. H.; Harwood, W. S.; Herring, F. G. (2002). General Chemistry (8th ed.). Prentice-Hall.^{[ISBN missing]}

[18] Senn, M. S.; Wright, J. P.; Attfield, J. P. (2012). "Charge order and three-site distortions in the Verwey structure of magnetite" (PDF). Nature. 481 (7380): 173–6. Bibcode:2012Natur.481..173S. doi:10.1038/nature10704. hdl:20.500.11820/1b3bb558-52d5-419f-9944-ab917dc95f5e. PMID 22190035. S2CID 4425300.

[19] Whitten, K. W.; Galley, K. D.; Davis, R. E. (1992). General Chemistry (4th ed.). Saunders. p. 147.^{[ISBN missing]}

[RedBook2005-20] Jump up to: ^a ^b ^c Connelly, N. G.; Damhus, T.; Hartshorn, R. M.; Hutton, A. T. Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005) (PDF). RSC Publishing.

[G&E-21] Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 27–28. ISBN 978-0-08-037941-8.

[G&E_Lithides-22] Jump up to: ^a ^b ^c ^d ^e Na(−1), K(−1), Rb(−1), and Cs(−1) are known in alkalides; the table by Greenwood and Earnshaw shows −1 only for Na and also erroneously for Li; no lithides are described.

[ZeroValentBeryllium-23] Be(0) has been observed; see "Beryllium(0) Complex Found". Chemistry Europe. 13 June 2016.

[24] Be(I) has been observed in beryllium monohydride (BeH); see Shayesteh, A.; Tereszchuk, K.; Bernath, P. F.; Colin, R. (2003). "Infrared Emission Spectra of BeH and BeD" (PDF). J. Chem. Phys. 118 (3): 1158. Bibcode:2003JChPh.118.1158S. doi:10.1063/1.1528606. Archived from the original (PDF) on 2007-12-02. Retrieved 2007-12-10. and in [(CAAC)₂Be]^+• [CAAC = cyclic (alkyl)(amino)carbene], see Wang, Guocang; Walley, Jacob E.; Dickie, Diane E.; Pan, Sudip; Frenking, Gernot; Gilliard Jr., Robert G. (2020). "A Stable, Crystalline Beryllium Radical Cation". J. Am. Chem. Soc. 142 (10): 4560–4. doi:10.1021/jacs.9b13777. Retrieved 2020-11-17.

[25] B(−5) has been observed in Al₃BC, see Schroeder, Melanie. "Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden" (in German). p. 139.

[26] B(−1) has been observed in magnesium diboride (MgB₂), see Keeler, James; Wothers, Peter (2014). Chemical Structure and Reactivity: An Integrated Approach. Oxford University Press. ISBN 9780199604135.

[27] B(0) has been observed in diborynes, see Braunschweig, H.; Dewhurst, R. D.; Hammond, K.; Mies, J.; Radacki, K.; Vargas, A. (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–2. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924.

[28] Gold heptafluoride is calculated to be the pentafluoride with a molecular F₂ ligand. Himmel, Daniel; Riedel, Sebastian (2007). "After 20 Years, Theoretical Evidence That 'AuF₇' Is Actually AuF₅•F₂". Inorganic Chemistry. 46 (13): 5338–5342. doi:10.1021/ic700431s.

[29] Low valent magnesium compounds with Mg(I) have been obtained using bulky ligands; see Green, S. P.; Jones C.; Stasch A. (December 2007). "Stable Magnesium(I) Compounds with Mg-Mg Bonds". Science. 318 (5857): 1754–1757. Bibcode:2007Sci...318.1754G. doi:10.1126/science.1150856. PMID 17991827.

[30] Mg(0) has been synthesized in a compound containing a Na₂Mg₂²⁺ cluster coordinated to a bulky organic ligand; see Rösch, B.; Gentner, T. X.; Eyselein, J.; Langer, J.; Elsen, H.; Li, W.; Harder, S. (2021). "Strongly reducing magnesium(0) complexes". Nature. 592: 717–721. doi:10.1038/s41586-021-03401-w

[31] Al(II) has been observed in aluminium(II) oxide (AlO); see Tyte, D.C. (1964). "Red (B2Π–A2σ) Band System of Aluminium Monoxide". Nature. 202 (4930): 383–384. Bibcode:1964Natur.202..383T. doi:10.1038/202383a0, and in (R₂Al—AlR₂); see Uhl, Werner (2004). "Organoelement Compounds Possessing Al—Al, Ga—Ga, In—In, and Tl—Tl Single Bonds". Advances in Organometallic Chemistry. 51: 53–108. doi:10.1016/S0065-3055(03)51002-4.

[Zintl-32] Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ Negative oxidation states of p-block metals (Al, Ga, In, Sn, Tl, Pb, Bi, Po) and metalloids (Si, Ge, As, Sb, Te, At) may occur in Zintl phases, see: Riedel, Erwin, ed. (2007). Moderne Anorganische Chemie (in German). p. 259, and "Vorlesung Intermetallische Phasen § 6.2 Binäre Zintl-Phasen" (in German).

[33] Al(−2) has been observed in Sr₁₄[Al₄]₂[Ge]₃, see Wemdorff, Marco; Röhr, Caroline (2007). "Sr₁₄[Al₄]₂[Ge]₃: Eine Zintl-Phase mit isolierten [Ge]^4–- und [Al₄]^8–-Anionen / Sr₁₄[Al₄]₂[Ge]₃: A Zintl Phase with Isolated [Ge]^4–- and [Al₄]^8– Anions". Zeitschrift für Naturforschung B (in German). 62 (10): 1227. doi:10.1515/znb-2007-1001.

[ZeroValentTin-34] Jump up to: ^a ^b ^c "New Type of Zero-Valent Tin Compound". Chemistry Europe. 27 August 2016.

[35] P(0) has been observed, see Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; King, R. Bruce; Schaefer, Iii; Schleyer, Paul v. R.; Robinson, Gregory H. (2008). "Carbene-Stabilized Diphosphorus". Journal of the American Chemical Society. 130 (45): 14970–1. doi:10.1021/ja807828t. PMID 18937460.

[36] The equilibrium Cl₂O₆⇌2ClO₃ is mentioned by Greenwood and Earnshaw, but it has been refuted, see Lopez, Maria; Juan E. Sicre (1990). "Physicochemical properties of chlorine oxides. 1. Composition, ultraviolet spectrum, and kinetics of the thermolysis of gaseous dichlorine hexoxide". J. Phys. Chem. 94 (9): 3860–3863. doi:10.1021/j100372a094., and Cl₂O₆ is actually chlorine(V,VII) oxide. However, ClO₃ has been observed, see Grothe, Hinrich; Willner, Helge (1994). "Chlorine Trioxide: Spectroscopic Properties, Molecular Structure, and Photochemical Behavior". Angew. Chem. Int. Ed. 33 (14): 1482–1484. doi:10.1002/anie.199414821.

[37] Ar(0) has been observed in argon fluorohydride (HArF) and ArCF₂²⁺, see Lockyear, J.F.; Douglas, K.; Price, S.D.; Karwowska, M.; et al. (2010). "Generation of the ArCF₂²⁺ Dication". Journal of Physical Chemistry Letters. 1: 358. doi:10.1021/jz900274p.

[38] Ca(I) has been observed; see Krieck, Sven; Görls, Helmar; Westerhausen, Matthias (2010). "Mechanistic Elucidation of the Formation of the Inverse Ca(I) Sandwich Complex [(thf)₃Ca(μ-C₆H₃-1,3,5-Ph₃)Ca(thf)₃] and Stability of Aryl-Substituted Phenylcalcium Complexes". Journal of the American Chemical Society. 132 (35): 12492–501. doi:10.1021/ja105534w. PMID 20718434.

[Ca0-39] Jump up to: ^a ^b ^c M(0); M = Ca, Sr, Ba has been observed in octacarbonyl complexes isolated in neon; see Wu, X.; Zhao, L.; Jin, J.; Pan, S.; Li, W.; Jin, X.; Wang, G.; Zhou, M.; Frenking, G. (2018). "Observation of alkaline earth complexes M(CO)8 (M = Ca, Sr, or Ba) that mimic transition metals". Science. 361 (6405): 912–916. doi:10.1126/science.aau0839

[40] Sc(0) has been observed; see F. Geoffrey N. Cloke; Karl Khan & Robin N. Perutz (1991). "η-Arene complexes of scandium(0) and scandium(II)". J. Chem. Soc., Chem. Commun. (19): 1372–1373. doi:10.1039/C39910001372.

[41] Sc(I) has been observed; see Polly L. Arnold; F. Geoffrey; N. Cloke; Peter B. Hitchcock & John F. Nixon (1996). "The First Example of a Formal Scandium(I) Complex: Synthesis and Molecular Structure of a 22-Electron Scandium Triple Decker Incorporating the Novel 1,3,5-Triphosphabenzene Ring". J. Am. Chem. Soc. 118 (32): 7630–7631. doi:10.1021/ja961253o.

[42] Sc(II) has been observed; see Woen, David H.; Chen, Guo P.; Ziller, Joseph W.; Boyle, Timothy J.; Furche, Filipp; Evans, William J. (January 2017). "Solution Synthesis, Structure, and CO Reduction Reactivity of a Scandium(II) Complex". Angewandte Chemie International Edition. 56 (8): 2050–2053. doi:10.1002/anie.201611758. PMID 28097771.

[43] Ti(I) has been observed in [Ti(η⁶-1,3,5-C₆H₃ⁱPr₃)2][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂); see Calderazzo, Fausto; Ferri, Isabella; Pampaloni, Guido; Englert, Ulli; Green, Malcolm L. H. (1997). "Synthesis of [Ti(η⁶-1,3,5-C₆H₃iPr₃)₂][BAr₄] (Ar = C₆H₅, p-C₆H₄F, 3,5-C₆H₃(CF₃)₂), the First Titanium(I) Derivatives". Organometallics. 16 (14): 3100–3101. doi:10.1021/om970155o.

[Carbonyls-44] Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l Ti(−2), V(−3), Cr(−4), Co(−3), Zr(−2), Nb(−3), Mo(−4), Ru(−2), Rh(−3), Hf(−2), Ta(−3), and W(−4) occur in anionic binary metal carbonyls; see [1], p. 4 (in German); [2], pp. 97–100; [3], p. 239

[45] Ti(−1) has been reported in [Ti(bipy)₃]⁻, but was later shown to be Ti(+3); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926. However, Ti(−1) occurs in [Ti(η-C₆H₆]⁻ and [Ti(η-C₆H₅CH₃)]⁻, see Bandy, J. A.; Berry, A.; Green, M. L. H.; Perutz, R. N.; Prout, K.; Verpeautz, J.-N. (1984). "Synthesis of anionic sandwich compounds: [Ti(η-C₆H₅R)₂]^– and the crystal structure of [K(18-crown-6)(µ-H)Mo(η-C₅H₅)₂]". Inorganic Chemistry. 52 (4): 729–731. doi:10.1039/C39840000729.

[46] Jilek, Robert E.; Tripepi, Giovanna; Urnezius, Eugenijus; Brennessel, William W.; Young, Victor G. Jr.; Ellis, John E. (2007). "Zerovalent titanium–sulfur complexes. Novel dithiocarbamato derivatives of Ti(CO)₆: [Ti(CO)₄(S₂CNR₂)]⁻". Chem. Commun. (25): 2639–2641. doi:10.1039/B700808B. PMID 17579764.

[47] Fe(VII) has been observed in [FeO₄]⁻; see Lu, Jun-Bo; Jian, Jiwen; Huang, Wei; Lin, Hailu; Zhou, Mingfei (2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO₄⁻". Physical Chemistry Chemical Physics. 18 (45): 31125–31131. Bibcode:2016PCCP...1831125L. doi:10.1039/C6CP06753K. PMID 27812577.

[48] Fe(VIII) has been reported; see Yurii D. Perfiliev; Virender K. Sharma (2008). "Higher Oxidation States of Iron in Solid State: Synthesis and Their Mössbauer Characterization – Ferrates – ACS Symposium Series (ACS Publications)". Platinum Metals Review. 48 (4): 157–158. doi:10.1595/147106704X10801. However, its existence has been disputed.

[MetalAnions-49] Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j Fe(−4), Ru(−4), and Os(−4) have been observed in metal-rich compounds containing octahedral complexes [MIn_6−xSn_x]; Pt(−3) (as a dimeric anion [Pt–Pt]⁶⁻), Cu(−2), Zn(−2), Ag(−2), Cd(−2), Au(−2), and Hg(−2) have been observed (as dimeric and monomeric anions; dimeric ions were initially reported to be [T–T]²⁻ for Zn, Cd, Hg, but later shown to be [T–T]⁴⁻ for all these elements) in La₂Pt₂In, La₂Cu₂In, Ca₅Au₃, Ca₅Ag₃, Ca₅Hg₃, Sr₅Cd₃, Ca₅Zn₃(structure (AE²⁺)₅(T–T)⁴⁻T²⁻⋅4e⁻), Yb₃Ag₂, Ca₅Au₄, and Ca₃Hg₂; Au(–3) has been observed in ScAuSn and in other 18-electron half-Heusler compounds. See Changhoon Lee; Myung-Hwan Whangbo (2008). "Late transition metal anions acting as p-metal elements". Solid State Sciences. 10 (4): 444–449. Bibcode:2008SSSci..10..444K. doi:10.1016/j.solidstatesciences.2007.12.001. and Changhoon Lee; Myung-Hwan Whangbo; Jürgen Köhler (2010). "Analysis of Electronic Structures and Chemical Bonding of Metal-rich Compounds. 2. Presence of Dimer (T–T)^4– and Isolated T^2– Anions in the Polar Intermetallic Cr₅B₃-Type Compounds AE₅T₃ (AE = Ca, Sr; T = Au, Ag, Hg, Cd, Zn)". Zeitschrift für Anorganische und Allgemeine Chemie. 636 (1): 36–40. doi:10.1002/zaac.200900421.

[50] Ni(−2) has been observed in Li₂[Ni(1,5-COD)₂], see Jonas, Klaus (1975). "Dilithium-Nickel-Olefin Complexes. Novel Bimetal Complexes Containing a Transition Metal and a Main Group Metal". Angew. Chem. Int. Ed. 14 (11): 752–753. doi:10.1002/anie.197507521. and Ellis, John E. (2006). "Adventures with Substances Containing Metals in Negative Oxidation States". Inorganic Chemistry. 45 (8): 3167–86. doi:10.1021/ic052110i. PMID 16602773.

[51] Cu(0) has been observed in Cu(tris[2-(diisopropylphosphino)- phenyl]borane), see Moret, Marc-Etienne; Zhang, Limei; Peters, Jonas C. (2013). "A Polar Copper–Boron One-Electron σ-Bond". J. Am. Chem. Soc. 135 (10): 3792–3795. doi:10.1021/ja4006578. PMID 23418750.

[52] Zn(0) has been observed; see Singh, Amit Pratap; Samuel, Prinson P.; Roesky, Herbert W.; Schwarzer, Martin C.; Frenking, Gernot; Sidhu, Navdeep S.; Dittrich, Birger (2013). "A Singlet Biradicaloid Zinc Compound and Its Nonradical Counterpart". J. Am. Chem. Soc. 135 (19): 7324–9. doi:10.1021/ja402351x. and Soleilhavoup, Michèle; Bertrand, Guy (2015). "Cyclic (Alkyl)(Amino)Carbenes (CAACs): Stable Carbenes on the Rise". Acc. Chem. Res. 48 (2): 256–266. doi:10.1021/ar5003494.

[53] Zn(I) has been observed in decamethyldizincocene (Zn₂(η⁵–C₅Me₅)₂); see Resa, I.; Carmona, E.; Gutierrez-Puebla, E.; Monge, A. (2004). "Decamethyldizincocene, a Stable Compound of Zn(I) with a Zn-Zn Bond". Science. 305 (5687): 1136–8. Bibcode:2004Sci...305.1136R. doi:10.1126/science.1101356. PMID 15326350.

[54] Ga(−2), Ga(−4), and Ga(−5) have been observed in the magnesium gallides MgGa, Mg₂Ga, and Mg₅Ga₂, respectively; see Patrick Hofmann. "Colture. Ein Programm zur interaktiven Visualisierung von Festkörperstrukturen sowie Synthese, Struktur und Eigenschaften von binären und ternären Alkali- und Erdalkalimetallgalliden" (PDF) (in German). p. 72.

[55] Ga(−3) has been observed in LaGa, see Dürr, Ines; Bauer, Britta; Röhr, Caroline (2011). "Lanthan-Triel/Tetrel-ide La(Al,Ga)_x(Si,Ge)_1-x. Experimentelle und theoretische Studien zur Stabilität intermetallischer 1:1-Phasen" (PDF). Z. Naturforsch. (in German). 66b: 1107–1121.

[56] Ge(−1), Ge(−2), and Ge(−3) have been observed in germanides; see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Germanium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. pp. 953–959. ISBN 978-3-11-012641-9.

[57] As(0) has been observed; see Abraham, Mariham Y.; Wang, Yuzhong; Xie, Yaoming; Wei, Pingrong; Shaefer III, Henry F.; Schleyer, P. von R.; Robinson, Gregory H. (2010). "Carbene Stabilization of Diarsenic: From Hypervalency to Allotropy". Chemistry: a European Journal. 16 (2): 432–5. doi:10.1002/chem.200902840.

[58] As(I) has been observed in (AsI); see Ellis, Bobby D.; MacDonald, Charles L. B. (2004). "Stabilized Arsenic(I) Iodide: A Ready Source of Arsenic Iodide Fragments and a Useful Reagent for the Generation of Clusters". Inorganic Chemistry. 43 (19): 5981–6. doi:10.1021/ic049281s. PMID 15360247.

[59] As(IV) has been observed in (As(OH)₄) and HAsO-; see Kläning, Ulrik K.; Bielski, Benon H. J.; Sehested, K. (1989). "Arsenic(IV). A pulse-radiolysis study". Inorganic Chemistry. 28 (14): 2717–24. doi:10.1021/ic00313a007.

[60] Se(−1) has been observed in diselenides(2−) (Se₂²⁻).

[61] Se(I) has been observed in selenium(I) chloride (Se₂Cl₂); see "Selenium: Selenium(I) chloride compound data". WebElements.com. Retrieved 2007-12-10.

[62] Se(III) has been observed in Se₂NBr₃; see Lau, Carsten; Neumüller, Bernhard; Vyboishchikov, Sergei F.; Frenking, Gernot; Dehnicke, Kurt; Hiller, Wolfgang; Herker, Martin (1996). "Se₂NBr₃, Se₂NCl₅, Se₂NCl⁻₆: New Nitride Halides of Selenium(III) and Selenium(IV)". Chemistry: A European Journal. 2 (11): 1393–1396. doi:10.1002/chem.19960021108.

[63] Se(V) has been observed in SeO2- and HSeO2-; see Kläning, Ulrik K.; Sehested, K. (1986). "Selenium(V). A pulse radiolysis study". Inorganic Chemistry. 90 (21): 5460–4. doi:10.1021/j100412a112.

[64] Sr(I) has been observed in (SrF); see P. Colarusso; Guo, B.; Zhang, K.-Q.; Bernath, P.F.; et al. (1996). "High-Resolution Infrared Emission Spectrum of Strontium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 175 (1): 158–171. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2012-03-08.

[Cloke1993-65] Jump up to: ^a ^b ^c ^d ^e ^f ^g ^h ⁱ ^j ^k ^l ^m ⁿ Yttrium and all lanthanides except Ce and Pm have been observed in the oxidation state 0 in bis(1,3,5-tri-t-butylbenzene) complexes, see Cloke, F. Geoffrey N. (1993). "Zero Oxidation State Compounds of Scandium, Yttrium, and the Lanthanides". Chem. Soc. Rev. 22: 17–24. doi:10.1039/CS9932200017. and Arnold, Polly L.; Petrukhina, Marina A.; Bochenkov, Vladimir E.; Shabatina, Tatyana I.; Zagorskii, Vyacheslav V.; Cloke (2003-12-15). "Arene complexation of Sm, Eu, Tm and Yb atoms: a variable temperature spectroscopic investigation". Journal of Organometallic Chemistry. 688 (1–2): 49–55. doi:10.1016/j.jorganchem.2003.08.028.

[66] Y(I) has been observed in (YBr); see "Yttrium: yttrium(I) bromide compound data". OpenMOPAC.net. Archived from the original on 2011-07-23. Retrieved 2007-12-10.

[67] Y(II) has been observed in [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]; see MacDonald, M. R.; Ziller, J. W.; Evans, W. J. (2011). "Synthesis of a Crystalline Molecular Complex of Y²⁺, [(18-crown-6)K][(C₅H₄SiMe₃)₃Y]". J. Am. Chem. Soc. 133 (40): 15914–17. doi:10.1021/ja207151y. PMID 21919538.

[68] Zr(−1) has been reported in [Zr(bipy)₃]⁻ (see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 960. ISBN 978-0-08-037941-8. and Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Zirconium". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1413. ISBN 978-3-11-012641-9.), but was later shown to be Zr(+4); see Bowman, A. C.; England, J.; Sprouls, S.; Weihemüller, T.; Wieghardt, K. (2013). "Electronic structures of homoleptic [tris(2,2'-bipyridine)M]n complexes of the early transition metals (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta; n = 1+, 0, 1-, 2-, 3-): an experimental and density functional theoretical study". Inorganic Chemistry. 52 (4): 2242–56. doi:10.1021/ic302799s. PMID 23387926.

[Zr0-69] Jump up to: ^a ^b Zr(0) and Hf(0) occur in (η⁶-(1,3,5-^tBu)₃C₆H₃)₂M (M=Zr, Hf) and [(η⁵-C₅R₅M(CO)₄]⁻, see Chirik, P. J.; Bradley, C. A. (2007). "4.06 - Complexes of Zirconium and Hafnium in Oxidation States 0 to ii". Comprehensive Organometallic Chemistry III. From Fundamentals to Applications. 4. Elsevier Ltd. pp. 697–739. doi:10.1016/B0-08-045047-4/00062-5.

[NbTa0-70] Complexes of Nb(0) and Ta(0) have been observed, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (2003). "4.5.7. Niobium(0) and Tantalum(0)". In J. A. McCleverty; T.J. Meyer (eds.). Comprehensive Coordination Chemistry II: From Biology to Nanotechnology. 4 (2 ed.). Newnes. pp. 297–299. ISBN 978-0-08-091316-2.

[NbTa-71] Jump up to: ^a ^b Nb(I) and Ta(I) occur in CpNb(CO)₄ and CpTa(CO)₄, see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1995). "Tantal". Lehrbuch der Anorganischen Chemie (in German) (101 ed.). Walter de Gruyter. p. 1430. ISBN 978-3-11-012641-9. and King, R. Bruce (1969). Transition-Metal Organometallic Chemistry: An Introduction. Academic Press. p. 11. ISBN 978-0-32-315996-8.

[72] George, G.N.; Klein, S.I.; Nixon, J.F. (1984). "Electron paramagnetic resonance spectroscopic studies on the zero-valent rhodium complex [Rh(P(OPrⁱ)₃)₄] at X-and Q-band frequencies". Chemical Physics Letters. 108 (6): 627–630. Bibcode:1984CPL...108..627G. doi:10.1016/0009-2614(84)85069-1.

[73] Pd(I) has been observed; see Crabtree, R. H. (2002). "CHEMISTRY: A New Oxidation State for Pd?". Science. 295 (5553): 288–289. doi:10.1126/science.1067921. PMID 11786632.

[74] Pd(III) has been observed; see Powers, D. C.; Ritter, T. (2011). Palladium(III) in Synthesis and Catalysis (PDF). Top. Organomet. Chem. Topics in Organometallic Chemistry. 35. pp. 129–156. Bibcode:2011hoso.book..129P. doi:10.1007/978-3-642-17429-2_6. ISBN 978-3-642-17428-5. PMC 3066514. PMID 21461129. Archived from the original (PDF) on June 12, 2013.

[75] The Ag⁻ ion has been observed in metal ammonia solutions: see Tran, N. E.; Lagowski, J. J. (2001). "Metal Ammonia Solutions: Solutions Containing Argentide Ions". Inorganic Chemistry. 40 (5): 1067–68. doi:10.1021/ic000333x.

[76] Cd(I) has been observed in cadmium(I) tetrachloroaluminate (Cd₂(AlCl₄)₂); see Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Cadmium". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1056–1057. ISBN 978-3-11-007511-3.

[77] In(–5) has been observed in La₃InGe, see Guloy, A. M.; Corbett, J. D. (1996). "Synthesis, Structure, and Bonding of Two Lanthanum Indium Germanides with Novel Structures and Properties". Inorganic Chemistry. 35 (9): 2616–22. doi:10.1021/ic951378e.

[78] In(−2) has been observed in Na₂In, see [4], p. 69.

[79] Sn(−3) has been observed in [Sn₂]⁶⁻, e.g. in (Ba₂)⁴⁺(Mg₄)⁸⁺Sn⁴⁻(Sn₂)⁶⁻Sn²⁻ (with square (Sn²⁻)_n sheets), see Papoian, Garegin A.; Hoffmann, Roald (2000). "Hypervalent Bonding in One, Two, and Three Dimensions: Extending the Zintl–Klemm Concept to Nonclassical Electron-Rich Networks". Angew. Chem. Int. Ed. 2000 (39): 2408–2448. doi:10.1002/1521-3773(20000717)39:14<2408::aid-anie2408>3.0.co;2-u. Retrieved 2015-02-23.

[80] Sn(I) and Sn(III) have been observed in organotin compounds

[81] Sb(−2) has been observed in [Sb₂]⁴⁻, e.g. in RbBa₄[Sb₂][Sb][O], see Boss, Michael; Petri, Denis; Pickhard, Frank; Zönnchen, Peter; Röhr, Caroline (2005). "Neue Barium-Antimonid-Oxide mit den Zintl-Ionen [Sb]³⁻, [Sb₂]⁴⁻ und ¹_∞[Sb_n]ⁿ⁻ / New Barium Antimonide Oxides containing Zintl Ions [Sb]³⁻, [Sb₂]⁴⁻ and ¹_∞[Sb_n]ⁿ⁻". Zeitschrift für Anorganische und Allgemeine Chemie (in German). 631 (6–7): 1181–1190. doi:10.1002/zaac.200400546.

[82] Sb(0) has been observed, see Anastas Sidiropoulos. "Studies of N-heterocyclic Carbene (NHC) Complexes of the Main Group Elements" (PDF). p. 39.

[83] Sb(I) and Sb(II) have been observed in organoantimony compounds; for Sb(I), see Šimon, Petr; de Proft, Frank; Jambor, Roman; Růžička, Aleš; Dostál, Libor (2010). "Monomeric Organoantimony(I) and Organobismuth(I) Compounds Stabilized by an NCN Chelating Ligand: Syntheses and Structures". Angewandte Chemie International Edition. 49 (32): 5468–5471. doi:10.1002/anie.201002209. PMID 20602393.

[84] Sb(IV) has been observed in [SbCl]²⁻
, see Nobuyoshi Shinohara; Masaaki Ohsima (2000). "Production of Sb(IV) Chloro Complex by Flash Photolysis of the Corresponding Sb(III) and Sb(V) Complexes in CH3CN and CHCl3". Bulletin of the Chemical Society of Japan. 73 (7): 1599–1604. doi:10.1246/bcsj.73.1599.

[85] Te(I) has been observed in tellurium iodide (TeI), see "Tellurium: tellurium iodide". WebElements.com. Retrieved 2015-02-23.

[86] Te(III) has been observed in [Te(N(SiMe₃)₂)₂]⁺, see Heinze, Thorsten; Roesky, Herbert W.; Pauer, Frank; Stalke, Dietmar; Sheldrick, George M. (1991). "Synthesis and Structure of the First Tellurium(III) Radical Cation". Angewandte Chemie International Edition. 30 (12): 1678. doi:10.1002/anie.199116771. Retrieved 2015-02-23.

[87] Te(V) is mentioned by Greenwood and Earnshaw, but they do not give any example of a Te(V) compound. What was long thought to be ditellurium decafluoride (Te₂F₁₀) is actually bis(pentafluorotelluryl) oxide, F₅TeOTeF₅: see Watkins, P. M. (1974). "Ditellurium decafluoride - A Continuing Myth". Journal of Chemical Education. 51 (9): 520–521. Bibcode:1974JChEd..51..520W. doi:10.1021/ed051p520. However, Te(V) has been observed in HTeO-, TeO-, HTeO2-, and TeO3-; see Kläning, Ulrik K.; Sehested, K. (2001). "Tellurium(V). A Pulse Radiolysis Study". The Journal of Physical Chemistry A. 105 (27): 6637–45. Bibcode:2001JPCA..105.6637K. doi:10.1021/jp010577i.

[88] I(IV) has been observed in iodine dioxide (IO₂); see Pauling, Linus (1988). "Oxygen Compounds of Nonmetallic Elements". General Chemistry (3rd ed.). Dover Publications, Inc. p. 259. ISBN 978-0-486-65622-9.

[89] I(VI) has been observed in IO₃, IO₄²⁻, H₅IO₆⁻, H₂IO₅²⁻, H₄IO₆²⁻, and HIO₅³⁻; see Kläning, Ulrik K.; Sehested, Knud; Wolff, Thomas (1981). "Laser flash photolysis and pulse radiolysis of iodate and periodate in aqueous solution. Properties of iodine(VI)". J. Chem. Soc., Faraday Trans. 1. 77 (7): 1707–18. doi:10.1039/F19817701707.

[90] Xe compounds: see Xenon

[91] Xe(0) has been observed in tetraxenonogold(II) (AuXe₄²⁺).

[92] Xe(I) has been reported in xenon hexafluoroplatinate and xenon hexafluororhodate (see Pauling, Linus (1988). General Chemistry (3rd ed.). Dover Publications, Inc. p. 250. ISBN 978-0-486-65622-9.), however these compounds were later found to contain Xe(II).

[93] Ba(I) has been observed in (BaF); see P. Colarusso; Guo, B.; Zhang, K.-Q.; Bernath, P.F.; et al. (1995). "High-Resolution Fourier Transform Infrared Emission Spectrum of Barium Monofluoride" (PDF). Journal of Molecular Spectroscopy. 170: 59. Bibcode:1996JMoSp.175..158C. doi:10.1006/jmsp.1996.0019. Archived from the original (PDF) on 2005-03-10.

[94] La(I) has been observed in (LaH); see Ram, R. S.; Bernath, P. F. (1996). "Fourier Transform Emission Spectroscopy of New Infrared Systems of LaH and LaD" (PDF). Journal of Molecular Spectroscopy. 104 (17): 6444. Bibcode:1996JChPh.104.6444R. doi:10.1063/1.471365. Archived from the original (PDF) on 2005-03-10.

[95] Pr(I) has been observed in [PrB₄]⁻; see Chen, Xin; Chen, Teng-Teng; Li, Wang-Lu; Lu, Jun-Bo; Zhao, Li-Juan; Jian, Tian; Hu, Han-Shi; Wang, Lai-Sheng; Li, Jun (2018-12-13). "Lanthanides with Unusually Low Oxidation States in the PrB₃^– and PrB₄^– Boride Clusters". Inorganic Chemistry. 58 (1): 411–418. doi:10.1021/acs.inorgchem.8b02572. PMID 30543295.

[96] Pr(V) has been observed in [PrO₂]⁺; see Zhang, Qingnan; Hu, Shu-Xian; Qu, Hui; Su, Jing; Wang, Guanjun; Lu, Jun-Bo; Chen, Mohua; Zhou, Mingfei; Li, Jun (2016-06-06). "Pentavalent Lanthanide Compounds: Formation and Characterization of Praseodymium(V) Oxides". Angewandte Chemie International Edition. 55 (24): 6896–6900. doi:10.1002/anie.201602196. ISSN 1521-3773. PMID 27100273.

[97] Hu, Shu-Xian; Jian, Jiwen; Su, Jing; Wu, Xuan; Li, Jun; Zhou, Mingfei (2017). "Pentavalent lanthanide nitride-oxides: NPrO and NPrO− complexes with N≡Pr triple bonds". Chemical Science. 8 (5): 4035–4043. doi:10.1039/C7SC00710H. ISSN 2041-6520. PMC 5434915. PMID 28580119.

[98] Nd(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5

[Lanthanides-99] Jump up to: ^a ^b ^c ^d ^e All the lanthanides (La–Lu) in the +2 oxidation state have been observed (except La, Gd, Lu) in dilute, solid solutions of dihalides of these elements in alkaline earth dihalides (see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5) and (except Pm) in organometallic molecular complexes, see Lanthanides Topple Assumptions and Meyer, G. (2014). "All the Lanthanides Do It and Even Uranium Does Oxidation State +2". Angewandte Chemie International Edition. 53 (14): 3550–51. doi:10.1002/anie.201311325. PMID 24616202.. Additionally, all the lanthanides (La–Lu) form dihydrides (LnH₂), dicarbides (LnC₂), monosulfides (LnS), monoselenides (LnSe), and monotellurides (LnTe), but for most elements these compounds have Ln³⁺ ions with electrons delocalized into conduction bands, e. g. Ln³⁺(H⁻)₂(e⁻).

[100] Dy(IV) has been observed in unstable solid state compounds; see Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5

[101] Hf(I) has been observed in hafnium monobromide (HfBr), see Marek, G.S.; Troyanov, S.I.; Tsirel'nikov, V.I. (1979). "Кристаллическое строение и термодинамические характеристики монобромидов циркония и гафния / Crystal structure and thermodynamic characteristics of monobromides of zirconium and hafnium". Журнал неорганической химии / Russian Journal of Inorganic Chemistry (in Russian). 24 (4): 890–893.

[102] Os(−1) has been observed in Na[Os(CO)
₁₃]; see Krause, J.; Siriwardane, Upali; Salupo, Terese A.; Wermer, Joseph R.; Knoeppel, David W.; Shore, Sheldon G. (1993). "Preparation of [Os₃(CO)₁₁]²⁻ and its reactions with Os₃(CO)₁₂; structures of [Et₄N] [HOs₃(CO)₁₁] and H₂OsS₄(CO)". Journal of Organometallic Chemistry. 454: 263–271. doi:10.1016/0022-328X(93)83250-Y. and Carter, Willie J.; Kelland, John W.; Okrasinski, Stanley J.; Warner, Keith E.; Norton, Jack R. (1982). "Mononuclear hydrido alkyl carbonyl complexes of osmium and their polynuclear derivatives". Inorganic Chemistry. 21 (11): 3955–3960. doi:10.1021/ic00141a019.

[103] Ir(−3) has been observed in Ir(CO)₃³⁻; see Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1117. ISBN 978-0-08-037941-8.

[104] Ir(VII) has been observed in [(η²-O₂)IrO₂]⁺; see C&EN: Iridium dressed to the nines.

[105] Ir(VIII) has been observed in iridium tetroxide (IrO₄); see Gong, Yu; Zhou, Mingfei; Kaupp, Martin; Riedel, Sebastian (2009). "Formation and Characterization of the Iridium Tetroxide Molecule with Iridium in the Oxidation State +VIII". Angewandte Chemie International Edition. 48 (42): 7879–7883. doi:10.1002/anie.200902733. PMID 19593837.

[106] Ir(IX) has been observed in IrO⁺
₄; see Wang, Guanjun; Zhou, Mingfei; Goettel, James T.; Schrobilgen, Gary G.; Su, Jing; Li, Jun; Schlöder, Tobias; Riedel, Sebastian (21 August 2014). "Identification of an iridium-containing compound with a formal oxidation state of IX". Nature. 514 (7523): 475–477. Bibcode:2014Natur.514..475W. doi:10.1038/nature13795. PMID 25341786.

[107] Pt(−1) and Pt(−2) have been observed in the barium platinides Ba₂Pt and BaPt, respectively: see Karpov, Andrey; Konuma, Mitsuharu; Jansen, Martin (2006). "An experimental proof for negative oxidation states of platinum: ESCA-measurements on barium platinides". Chemical Communications (8): 838–840. doi:10.1039/b514631c. PMID 16479284.

[108] Pt(I) and Pt(III) have been observed in bimetallic and polymetallic species; see Kauffman, George B.; Thurner, Joseph J.; Zatko, David A. (1967). Ammonium Hexachloroplatinate(IV). Inorganic Syntheses. 9. pp. 182–185. doi:10.1002/9780470132401.ch51. ISBN 978-0-470-13240-1.

[109] Au(0) has been observed, see Mézaille, Nicolas; Avarvari, Narcis; Maigrot, Nicole; Ricard, Louis; Mathey, François; Le Floch, Pascal; Cataldo, Laurent; Berclaz, Théo; Geoffroy, Michel (1999). "Gold(I) and Gold(0) Complexes of Phosphinine‐Based Macrocycles". Angewandte Chemie International Edition (21): 3194–3197. doi:10.1002/(SICI)1521-3773(19991102)38:21<3194::AID-ANIE3194>3.0.CO;2-O.

[110] Hg(IV) has been reported in mercury(IV) fluoride (HgF₄); see Xuefang Wang; Lester Andrews; Sebastian Riedel; Martin Kaupp (2007). "Mercury Is a Transition Metal: The First Experimental Evidence for HgF₄". Angew. Chem. Int. Ed. 46 (44): 8371–8375. doi:10.1002/anie.200703710. PMID 17899620. However, it could not be confirmed by later experiments; see Is mercury a transition metal? Archived 2016-10-12 at the Wayback Machine

[111] Tl(−5) has been observed in Na₂₃K₉Tl_15.3, see Dong, Z.-C.; Corbett, J. D. (1996). "Na₂₃K₉Tl_15.3: An Unusual Zintl Compound Containing Apparent Tl₅⁷⁻, Tl₄⁸⁻, Tl₃⁷⁻, and Tl⁵⁻ Anions". Inorganic Chemistry. 35 (11): 3107–12. doi:10.1021/ic960014z.

[112] Tl(−1) has been observed in (CsTl); see King, R. B.; Schleyer, R. (2004). "Theory and concepts in main-group cluster chemistry". In Driess, M.; Nöth, H. (eds.). Molecular clusters of the main group elements. Wiley-VCH, Chichester. p. 19. ISBN 978-3-527-61437-0.

[113] Tl(+2) has been observed in ([(Me₃Si)Si]₂Tl—Tl[Si(SiMe₃)]₂), see Sonja Henkel; Dr. Karl Wilhelm Klinkhammer; Dr. Wolfgang Schwarz (1994). "Tetrakis(hypersilyl)dithallium(Tl—Tl): A Divalent Thallium Compound". Angew. Chem. Int. Ed. 33 (6): 681–683. doi:10.1002/anie.199406811.

[114] Pb(−2) has been observed in BaPb, see Ferro, Riccardo (2008). Nicholas C. Norman (ed.). Intermetallic Chemistry. Elsevier. p. 505. ISBN 978-0-08-044099-6. and Todorov, Iliya; Sevov, Slavi C. (2004). "Heavy-Metal Aromatic Rings: Cyclopentadienyl Anion Analogues Sn₅⁶⁻ and Pb₅⁶⁻ in the Zintl Phases Na₈BaPb₆, Na₈BaSn₆, and Na₈EuSn₆". Inorganic Chemistry. 43 (20): 6490–94. doi:10.1021/ic000333x.

[115] Pb(+1) and Pb(+3) have been observed in organolead compounds, e.g. hexamethyldiplumbane Pb₂(CH₃)₆; for Pb(I), see Siew-Peng Chia; Hong-Wei Xi; Yongxin Li; Kok Hwa Lim; Cheuk-Wai So (2013). "A Base-Stabilized Lead(I) Dimer and an Aromatic Plumbylidenide Anion". Angew. Chem. Int. Ed. 52 (24): 6298–6301. doi:10.1002/anie.201301954. PMID 23629949.

[116] Bi(−2) and Bi(−1) occur in Zintl phases, e.g. (Ca²⁺)₂₂[Bi₄]⁴⁻([Bi₂]⁴⁻)₄[Bi³⁻]₈; see Ponou, Siméon (2006). "Germanides, Germanide-Tungstate Double Salts and Substitution Effects in Zintl Phases". Technische Universität München. Lehrstuhl für Anorganische Chemie mit Schwerpunkt Neue Materialien. p. 68.

[117] Bi(I) has been observed in (BiBr) and (BiI); see Godfrey, S. M.; McAuliffe, C. A.; Mackie, A. G.; Pritchard, R. G. (1998). Nicholas C. Norman (ed.). Chemistry of arsenic, antimony, and bismuth. Springer. pp. 67–84. ISBN 978-0-7514-0389-3.

[118] Bi(+2) has been observed in (R₂Bi—BiR₂), see Arthur J. Ashe III (1990). Thermochromic Distibines and Dibismuthines. Advances in Organometallic Chemistry. 30. pp. 77–97. doi:10.1016/S0065-3055(08)60499-2. ISBN 9780120311309.

[119] Bi(IV) has been observed; see A. I. Aleksandrov, I. E. Makarov (1987). "Formation of Bi(II) and Bi(IV) in aqueous hydrochloric solutions of Bi(III)". Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science. 36 (2): 217��220. doi:10.1007/BF00959349.

[120] Po(V) has been observed in (PoO+); see Thayer, John S. (2010). "Relativistic Effects and the Chemistry of the Heavier Main Group Elements". Relativistic Methods for Chemists. p. 78. doi:10.1007/978-1-4020-9975-5_2. ISBN 978-1-4020-9974-8.

[121] Rn(II) has been observed in radon difluoride (RnF₂); see Stein, L. (1970). "Ionic Radon Solution". Science. 168 (3929): 362–4. Bibcode:1970Sci...168..362S. doi:10.1126/science.168.3929.362. PMID 17809133. and Kenneth S. Pitzer (1975). "Fluorides of radon and element 118". J. Chem. Soc., Chem. Commun. (18): 760b–761. doi:10.1039/C3975000760b.

[122] Rn(IV) is reported by Greenwood and Earnshaw, but is not known to exist; see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.

[123] Rn(VI) is known in radon trioxide (RnO₃); see Sykes, A. G. (1998). "Recent Advances in Noble-Gas Chemistry". Advances in Inorganic Chemistry. 46. Academic Press. pp. 91–93. ISBN 978-0-12-023646-6. Retrieved 22 November 2012.

[124] Ac(II) is known in Actinium(II) hydride (AcH₂); see Farr, J.; Giorgi, A. L.; Bowman, M. G.; Money, R. K. (1961). "The crystal structure of actinium metal and actinium hydride". Journal of Inorganic and Nuclear Chemistry. 18: 42–47. doi:10.1016/0022-1902(61)80369-2.

[125] Th(I) is known in thorium(I) bromide (ThBr); see Wickleder, Mathias S.; Fourest, Blandine; Dorhout, Peter K. (2006). "Thorium". In Morss, Lester R.; Edelstein, Norman M.; Fuger, Jean (eds.). The Chemistry of the Actinide and Transactinide Elements (PDF). 3 (3rd ed.). Dordrecht, the Netherlands: Springer. pp. 52–160. doi:10.1007/1-4020-3598-5_3. ISBN 978-1-4020-3555-5. Archived from the original (PDF) on 2016-03-07.

[126] Th(II) and Th(III) are observed in [Th^II{η⁵-C₅H₃(SiMe₃)₂}₃]⁻ and [Th^III{η⁵-C₅H₃(SiMe₃)₂}₃], see Langeslay, Ryan R.; Fieser, Megan E.; Ziller, Joseph W.; Furche, Philip; Evans, William J. (2015). "Synthesis, structure, and reactivity of crystalline molecular complexes of the {[C₅H₃(SiMe₃)₂]₃Th}¹⁻ anion containing thorium in the formal +2 oxidation state". Chem. Sci. 6 (1): 517–521. doi:10.1039/C4SC03033H. PMC 5811171. PMID 29560172.

[127] U(I) has been observed in (UF) and (UCl), see Sykes, A. G. (1990). "Compounds of Thorium and Uranium". Advances in Inorganic Chemistry. 34. Academic Press. pp. 87–88. ISBN 978-0-12-023634-3. Retrieved 22 March 2015.

[128] U(II) has been observed in [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U], see MacDonald, Matthew R.; Fieser, Megan E.; Bates, Jefferson E.; Ziller, Joseph W.; Furche, Filipp; Evans, William J. (2013). "Identification of the +2 Oxidation State for Uranium in a Crystalline Molecular Complex, [K(2.2.2-Cryptand)][(C₅H₄SiMe₃)₃U]". J. Am. Chem. Soc. 135 (36): 13310–13313. doi:10.1021/ja406791t. PMID 23984753.

[Dutkiewicz2017-129] Np(II), (III) and (IV) have been observed, see Dutkiewicz, Michał S.; Apostolidis, Christos; Walter, Olaf; Arnold, Polly L (2017). "Reduction chemistry of neptunium cyclopentadienide complexes: from structure to understanding". Chem. Sci. 8 (4): 2553–2561. doi:10.1039/C7SC00034K. PMC 5431675. PMID 28553487.

[130] Pu(II) has been observed in {Pu[C₅H₃(SiMe₃)₂]₃}−; see Windorff, Cory J.; Chen, Guo P; Cross, Justin N; Evans, William J.; Furche, Filipp; Gaunt, Andrew J.; Janicke, Michael T.; Kozimor, Stosh A.; Scott, Brian L. (2017). "Identification of the Formal +2 Oxidation State of Plutonium: Synthesis and Characterization ofref name="curium5" {Pu^II[C₅H₃(SiMe₃)₂]₃}−". J. Am. Chem. Soc. 139 (11): 3970–3973. doi:10.1021/jacs.7b00706. PMID 28235179.

[131] Pu(VIII) has been observed in PuO
₄; see Nikonov, M. V.; Kiselev, Yu. M.; Tananaev, I. G.; Myasoedov, B. F. (March 2011). "Plutonium volatility in ozonization of alkaline solutions of Pu(VI) hydroxo complexes". Doklady Chemistry. 437 (1): 69–71. doi:10.1134/S0012500811030104. Also see Kiselev, Yu. M.; Nikonov, M. V.; Dolzhenko, V. D.; Ermilov, A. Yu.; Tananaev, I. G.; Myasoedov, B. F. (17 January 2014). "On existence and properties of plutonium(VIII) derivatives". Radiochimica Acta. 102 (3). doi:10.1515/ract-2014-2146.

[132] Am(VII) has been observed in AmO5-; see Americium, Das Periodensystem der Elemente für den Schulgebrauch (The periodic table of elements for schools) chemie-master.de (in German), Retrieved 28 November 2010 and Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1265. ISBN 978-0-08-037941-8.

[Dau2017-133] Jump up to: ^a ^b ^c Cm(V), Bk(V), and Cf(V) have been observed in BkO₂⁺, CfO₂⁺, CmO₂(NO₃)₂⁻, BkO₂(NO₃)₂⁻, and CfO₂(NO₃)₂⁻; see Dau, Phuong Diem; Vasiliu, Monica; Peterson, Kirk A; Dixon, David A; Gibsoon, John K (October 2017). "Remarkably High Stability of Late Actinide Dioxide Cations: Extending Chemistry to Pentavalent Berkelium and Californium". Chemistry - A European Journal. 23 (68): 17369–17378. doi:10.1002/chem.201704193. PMID 29024093.

[Kovács2018-134] Jump up to: ^a ^b ^c Kovács, Attila; Dau, Phuong D.; Marçalo, Joaquim; Gibson, John K. (2018). "Pentavalent Curium, Berkelium, and Californium in Nitrate Complexes: Extending Actinide Chemistry and Oxidation States". Inorg. Chem. American Chemical Society. 57 (15): 9453–9467. doi:10.1021/acs.inorgchem.8b01450. PMID 30040397.

[135] Cm(VI) has been observed in (CmO₃) and dioxidocurium(2+) (CmO2+); see Domanov, V. P.; Lobanov, Yu. V. (October 2011). "Formation of volatile curium(VI) trioxide CmO₃". Radiochemistry. 53 (5): 453–6. doi:10.1134/S1066362211050018.

[136] Cm(VIII) has been reported to possibly occur in (CmO₄); see Domanov, V. P. (January 2013). "Possibility of generation of octavalent curium in the gas phase in the form of volatile tetraoxide CmO₄". Radiochemistry. 55 (1): 46–51. doi:10.1134/S1066362213010098. However, new experiments seem to indicate its nonexistence: Zaitsevskii, Andréi; Schwarz, W H Eugen (April 2014). "Structures and stability of AnO4 isomers, An = Pu, Am, and Cm: a relativistic density functional study". Physical Chemistry Chemical Physics. 2014 (16): 8997–9001. Bibcode:2014PCCP...16.8997Z. doi:10.1039/c4cp00235k. PMID 24695756.

[Peterson-137] Peterson, J. R.; Hobart, D. E. (1984). "The Chemistry of Berkelium". In Emeléus, Harry Julius (ed.). Advances in inorganic chemistry and radiochemistry. 28. Academic Press. pp. 29–64. doi:10.1016/S0898-8838(08)60204-4. ISBN 978-0-12-023628-2.

[FOOTNOTEPeterson198455-138] Peterson 1984, p. 55.

[139] Sullivan, Jim C.; Schmidt, K. H.; Morss, L. R.; Pippin, C. G.; Williams, C. (1988). "Pulse radiolysis studies of berkelium(III): preparation and identification of berkelium(II) in aqueous perchlorate media". Inorganic Chemistry. 27 (4): 597. doi:10.1021/ic00277a005.

[140] Es(IV) is known in (EsF₄); see Kleinschmidt, P (1994). "Thermochemistry of the actinides". Journal of Alloys and Compounds. 213–214: 169–172. doi:10.1016/0925-8388(94)90898-2.

[141] Db(V) has been observed in dubnium pentachloride (DbCl₅); see H. W. Gäggeler (2007). "Gas Phase Chemistry of Superheavy Elements" (PDF). Paul Scherrer Institute. pp. 26–28. Archived from the original (PDF) on 2012-02-20.

[142] Sg(VI) has been observed in seaborgium oxide hydroxide (SgO₂(OH)₂); see Huebener, S.; Taut, S.; Vahle, A.; Dressler, R.; Eichler, B.; Gäggeler, H. W.; Jost, D.T.; Piguet, D.; et al. (2001). "Physico-chemical characterization of seaborgium as oxide hydroxide" (PDF). Radiochim. Acta. 89 (11–12_2001): 737–741. doi:10.1524/ract.2001.89.11-12.737. Archived from the original (PDF) on 2014-10-25.

[143] Sg(0) has been observed in seaborgium hexacarbonyl (Sg(CO)₆); see Even, J.; Yakushev, A.; Dullmann, C. E.; Haba, H.; Asai, M.; Sato, T. K.; Brand, H.; Di Nitto, A.; Eichler, R.; Fan, F. L.; Hartmann, W.; Huang, M.; Jager, E.; Kaji, D.; Kanaya, J.; Kaneya, Y.; Khuyagbaatar, J.; Kindler, B.; Kratz, J. V.; Krier, J.; Kudou, Y.; Kurz, N.; Lommel, B.; Miyashita, S.; Morimoto, K.; Morita, K.; Murakami, M.; Nagame, Y.; Nitsche, H.; et al. (2014). "Synthesis and detection of a seaborgium carbonyl complex". Science. 345 (6203): 1491–3. Bibcode:2014Sci...345.1491E. doi:10.1126/science.1255720. PMID 25237098.

[144] Bh(VII) has been observed in bohrium oxychloride (BhO₃Cl); see "Gas chemical investigation of bohrium (Bh, element 107)" Archived 2008-02-28 at the Wayback Machine, Eichler et al., GSI Annual Report 2000. Retrieved on 2008-02-29

[145] Hs(VIII) has been observed in hassium tetroxide (HsO₄); see "Chemistry of Hassium" (PDF). Gesellschaft für Schwerionenforschung mbH. 2002. Retrieved 2007-01-31.

[146] Cn(II) has been observed in copernicium selenide (CnSe); see "Annual Report 2015: Laboratory of Radiochemistry and Environmental Chemistry" (PDF). Paul Scherrer Institute. 2015. p. 3.

[147] Langmuir, Irving (1919). "The arrangement of electrons in atoms and molecules". J. Am. Chem. Soc. 41 (6): 868–934. doi:10.1021/ja02227a002.

[148] "Antoine Laurent Lavoisier The Chemical Revolution - Landmark - American Chemical Society". American Chemical Society. Retrieved 14 July 2018.

[149] "Lavoisier on Elements". Chem125-oyc.webspace.yale.edu. Retrieved 14 July 2018.

[150] Wöhler, F. (1835). Grundriss der Chemie: Unorganische Chemie [Foundations of Chemistry: Inorganic Chemistry]. Berlin: Duncker und Humblot. p. 4.

[151] Jensen, W. B. (2007). "the origin of the oxidation-state concept". J. Chem. Educ. 84 (9): 1418–1419. Bibcode:2007JChEd..84.1418J. doi:10.1021/ed084p1418.

[152] Stock, A. (1919). "Einige Nomenklaturfragen der anorganischen Chemie" [Some nomenclature issues of inorganic chemistry]. Angew. Chem. 32 (98): 373–374. doi:10.1002/ange.19190329802.

[1940IUPACinorgnom-153] Jump up to: ^a ^b Jorissen, W. P.; Bassett, H.; Damiens, A.; Fichter, F.; Rémy, H. (1941). "Rules for naming inorganic compounds". J. Am. Chem. Soc. 63: 889–897. doi:10.1021/ja01849a001.

[154] Latimer, W. M. (1938). The Oxidation States of the Elements and their Potentials in Aqueous Solutions (1st ed.). Prentice-Hall.

[155] Bray, W. C.; Branch, G. E. K. (1913). "Valence and tautomerism". J. Am. Chem. Soc. 35 (10): 1440–1447. doi:10.1021/ja02199a003.

[156] Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, I. The oxidation and reduction reactions". J. Am. Chem. Soc. 57 (7): 1221–1229. doi:10.1021/ja01310a018.

[157] Noyes, A. A.; Pitzer, K. S.; Dunn, C. L. (1935). "Argentic salts in acid solution, II. The oxidation state of argentic salts". J. Am. Chem. Soc. 57 (7): 1229–1237. doi:10.1021/ja01310a019.

[158] Fernelius, W. C. (1948). "Some problems of inorganic nomenclature". Chem. Eng. News. 26: 161–163. doi:10.1021/cen-v026n003.p161.

[159] Fernelius, W. C.; Larsen, E. M.; Marchi, L. E.; Rollinson, C. L. (1948). "Nomenclature of coördination compounds". Chem. Eng. News. 26 (8): 520–523. doi:10.1021/cen-v026n008.p520.

[160] Pauling, L. (1948). "The modern theory of valency". J. Chem. Soc. 1948: 1461–1467. doi:10.1039/JR9480001461. PMID 18893624.

[161] Calvert, J. G. (1990). "IUPAC Recommendation 1990". Pure Appl. Chem. 62: 2204. doi:10.1351/pac199062112167.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

[33]

[34]

[35]

[36]

[37]

[38]

[39]

[40]

[41]

[42]

[43]

[44]

[45]

[46]

[47]

[48]

[49]

[50]

[51]

[52]

[53]

[54]

[55]

[56]

[57]

[58]

[59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76]

[77]

[78]

[79]

[80]

[81]

[82]

[83]

[84]

[85]

[86]

[87]

[88]

[89]

[90]

[91]

[92]

[93]

[94]

[95]

[96]

[97]

[98]

[99]

[100]

show v t Oxides
Mixed oxidation states	Antimony tetroxide (Sb₂O₄) Cobalt(II,III) oxide (Co₃O₄) Lead(II,IV) oxide (Pb₃O₄) Manganese(II,III) oxide (Mn₃O₄) Iron(II,III) oxide (Fe₃O₄) Silver(I,III) oxide (Ag₂O₂) Triuranium octoxide (U₃O₈) Carbon suboxide (C₃O₂) Mellitic anhydride (C₁₂O₉) Praseodymium(III,IV) oxide (Pr₆O₁₁) Terbium(III,IV) oxide (Tb₄O₇) Dichlorine pentoxide (Cl₂O₅)
+1 oxidation state	Copper(I) oxide (Cu₂O) Caesium oxide (Cs₂O) Dicarbon monoxide (C₂O) Dichlorine monoxide (Cl₂O) Gallium(I) oxide (Ga₂O) Lithium oxide (Li₂O) Potassium oxide (K₂O) Rubidium oxide (Rb₂O) Silver oxide (Ag₂O) Thallium(I) oxide (Tl₂O) Sodium oxide (Na₂O) Water (hydrogen oxide) (H₂O)
+2 oxidation state	Aluminium(II) oxide (AlO) Barium oxide (BaO) Beryllium oxide (BeO) Cadmium oxide (CdO) Calcium oxide (CaO) Carbon monoxide (CO) Chromium(II) oxide (CrO) Cobalt(II) oxide (CoO) Copper(II) oxide (CuO) Dinitrogen dioxide (N₂O₂) Germanium monoxide (GeO) Iron(II) oxide (FeO) Lead(II) oxide (PbO) Magnesium oxide (MgO) Manganese(II) oxide (MnO) Mercury(II) oxide (HgO) Nickel(II) oxide (NiO) Nitric oxide (NO) Palladium(II) oxide (PdO) Silicon monoxide (SiO) Strontium oxide (SrO) Sulfur monoxide (SO) Disulfur dioxide (S₂O₂) Thorium monoxide (ThO) Tin(II) oxide (SnO) Titanium(II) oxide (TiO) Vanadium(II) oxide (VO) Zinc oxide (ZnO)
+3 oxidation state	Actinium(III) oxide (Ac₂O₃) Aluminium oxide (Al₂O₃) Antimony trioxide (Sb₂O₃) Arsenic trioxide (As₂O₃) Bismuth(III) oxide (Bi₂O₃) Boron trioxide (B₂O₃) Cerium(III) oxide (Ce₂O₃) Chromium(III) oxide (Cr₂O₃) Cobalt(III) oxide (Co₂O₃) Dinitrogen trioxide (N₂O₃) Dysprosium(III) oxide (Dy₂O₃) Erbium(III) oxide (Er₂O₃) Europium(III) oxide (Eu₂O₃) Gadolinium(III) oxide (Gd₂O₃) Gallium(III) oxide (Ga₂O₃) Holmium(III) oxide (Ho₂O₃) Indium(III) oxide (In₂O₃) Iron(III) oxide (Fe₂O₃) Lanthanum oxide (La₂O₃) Lutetium(III) oxide (Lu₂O₃) Manganese(III) oxide (Mn₂O₃) Neodymium(III) oxide (Nd₂O₃) Nickel(III) oxide (Ni₂O₃) Phosphorus monoxide (PO) Phosphorus trioxide (P₄O₆) Praseodymium(III) oxide (Pr₂O₃) Promethium(III) oxide (Pm₂O₃) Rhodium(III) oxide (Rh₂O₃) Samarium(III) oxide (Sm₂O₃) Scandium oxide (Sc₂O₃) Terbium(III) oxide (Tb₂O₃) Thallium(III) oxide (Tl₂O₃) Thulium(III) oxide (Tm₂O₃) Titanium(III) oxide (Ti₂O₃) Tungsten(III) oxide (W₂O₃) Vanadium(III) oxide (V₂O₃) Ytterbium(III) oxide (Yb₂O₃) Yttrium(III) oxide (Y₂O₃)
+4 oxidation state	Americium dioxide (AmO₂) Carbon dioxide (CO₂) Carbon trioxide (CO₃) Cerium(IV) oxide (CeO₂) Chlorine dioxide (ClO₂) Chromium(IV) oxide (CrO₂) Dinitrogen tetroxide (N₂O₄) Germanium dioxide (GeO₂) Hafnium(IV) oxide (HfO₂) Lead dioxide (PbO₂) Manganese dioxide (MnO₂) Neptunium(IV) oxide (NpO₂) Nitrogen dioxide (NO₂) Osmium dioxide (OsO₂) Plutonium(IV) oxide (PuO₂) Praseodymium(IV) oxide (PrO₂) Protactinium(IV) oxide (PaO₂) Rhodium(IV) oxide (RhO₂) Ruthenium(IV) oxide (RuO₂) Selenium dioxide (SeO₂) Silicon dioxide (SiO₂) Sulfur dioxide (SO₂) Tellurium dioxide (TeO₂) Terbium(IV) oxide (TbO₂) Thorium dioxide (ThO₂) Tin dioxide (SnO₂) Titanium dioxide (TiO₂) Tungsten(IV) oxide (WO₂) Uranium dioxide (UO₂) Vanadium(IV) oxide (VO₂) Zirconium dioxide (ZrO₂)
+5 oxidation state	Antimony pentoxide (Sb₂O₅) Arsenic pentoxide (As₂O₅) Dinitrogen pentoxide (N₂O₅) Niobium pentoxide (Nb₂O₅) Phosphorus pentoxide (P₂O₅) Protactinium(V) oxide (Pa₂O₅) Tantalum pentoxide (Ta₂O₅) Vanadium(V) oxide (V₂O₅)
+6 oxidation state	Chromium trioxide (CrO₃) Molybdenum trioxide (MoO₃) Rhenium trioxide (ReO₃) Selenium trioxide (SeO₃) Sulfur trioxide (SO₃) Tellurium trioxide (TeO₃) Tungsten trioxide (WO₃) Uranium trioxide (UO₃) Xenon trioxide (XeO₃)
+7 oxidation state	Dichlorine heptoxide (Cl₂O₇) Manganese heptoxide (Mn₂O₇) Rhenium(VII) oxide (Re₂O₇) Technetium(VII) oxide (Tc₂O₇)
+8 oxidation state	Osmium tetroxide (OsO₄) Ruthenium tetroxide (RuO₄) Xenon tetroxide (XeO₄) Iridium tetroxide (IrO₄)
Related	Oxocarbon Suboxide Oxyanion Ozonide Peroxide Superoxide Oxypnictide
Oxides are sorted by oxidation state. Category:Oxides

Oxidation state

Contents

IUPAC definition[]

Determination[]

Simple approach without bonding considerations[]

Algorithm of assigning bonds[]

The algorithm's caveat[]

Algorithm of summing bond orders[]

Applied to a Lewis structure[]

Applied to bond graph[]

Balancing redox[]

Appearances[]

Nominal oxidation states[]

Ambiguous oxidation states[]

Oxidation-state determination from resonance formulas is not straightforward[]

A physical measurement is needed to decide the oxidation state[]

Truly ambiguous oxidation states occur[]

Fractional oxidation states[]

Elements with multiple oxidation states[]

Oxidation state in metals[]

List of oxidation states of the elements[]

Early forms (octet rule)[]

Use in nomenclature[]

History of the oxidation state concept[]

Early days[]

Use in nomenclature[]

Development towards the current concept[]

See also[]

References[]