Toronto subway

Toronto subway

Subway train at Museum station
Overview
Owner	City of Toronto (Lines 1, 2, 3 and 4) Metrolinx (Lines 5 and 6)
Locale	Toronto Vaughan
Transit type	Rapid transit
Number of lines	4 (plus 2 under construction)
Number of stations	75 (plus 39 under construction)[1][2]
Daily ridership	1.58 million (avg. unlinked weekday, Q1 2019)[3]
Annual ridership	216.7 million (2018)[4]
Website	www.ttc.ca/Subway/
Operation
Began operation	March 30, 1954
Operator(s)	Toronto Transit Commission (TTC)
Number of vehicles	858 heavy rail and light metro cars 66 work cars
Train length	3 cars (Line 5) 4 cars (Lines 3 and 4) 6 cars (Lines 1 and 2)
Headway	2 min 21 s – 5 min (Lines 1 and 2) 5 min – 6 min 45 s (Line 3) 5 min 30 s (Line 4)[5]
Technical
System length	76.9 km (47.8 mi)[1][2] 19 km (12 mi) (under construction)[6] 11 km (6.8 mi) (approved)[7]
Track gauge	4 ft 10+7⁄8 in (1,495 mm) (Lines 1, 2 and 4) 1,435 mm (4 ft 8+1⁄2 in) standard gauge (Lines 3, 5 and 6)
Electrification	600 V DC third rail (Lines 1, 2 and 4) Linear induction (Line 3) Overhead 750 V DC (Lines 5 and 6)
hideSystem map

hide Toronto subway
Legend
Don Mills Leslie Vaughan Bessarion Highway 407 Bayview Pioneer Village Finch York University North York Centre Finch West Sheppard–Yonge Downsview Park York Mills Sheppard West Lawrence Wilson Eglinton Yorkdale Davisville Lawrence West St. Clair Glencairn Summerhill Eglinton West Rosedale St. Clair West McCowan Dupont Scarborough Centre Kipling Midland Islington Ellesmere Royal York Lawrence East Old Mill Kennedy Jane Warden Runnymede Victoria Park High Park Main Street Keele Woodbine Dundas West Coxwell Lansdowne Greenwood Dufferin Donlands Ossington Pape Christie Chester Bathurst Broadview Spadina Castle Frank St. George Sherbourne Bay Bloor–Yonge Museum Wellesley Queen's Park College St. Patrick Dundas Osgoode Queen St. Andrew King Union
Yonge–University Bloor–Danforth Scarborough Sheppard
This diagram: view talk

The Toronto subway is a rapid transit system serving Toronto and the neighbouring city of Vaughan in Ontario, Canada, operated by the Toronto Transit Commission (TTC). It is a multimodal rail network consisting of three heavy-capacity rail lines operating predominantly underground, and one elevated medium-capacity rail line. Two light rail lines, which will operate both at-grade and underground, are under construction.

In 1954, the TTC opened Canada's first underground rail line, then known as the "Yonge subway", under Yonge Street between Union Station and Eglinton Avenue with 12 stations. As of 2018, the network encompasses 75 stations and 76.9 kilometres (47.8 mi) of route.^[1][2] Over 216 million unlinked rides were completed on the system that year,^[8] and with 1.58 million riders every weekday, it is the busiest rapid transit system in Canada in terms of ridership.^[9]

Overview[]

Line	Stations	Length[1][10]	Technology
Yonge–University	38	38.8 km (24.1 mi)	Heavy rail
Bloor–Danforth	31	26.2 km (16.3 mi)	Heavy rail
Scarborough	6	6.4 km (4.0 mi)	Light metro
Sheppard	5	5.5 km (3.4 mi)	Heavy rail
Under construction
Eglinton	25	19 km (12 mi)	Light rail
Finch West	18	11 km (6.8 mi)	Light rail

There are four operating rapid transit lines in Toronto and two lines under construction:

• Line 1 Yonge–University is the longest and busiest rapid transit line in the system. It opened as the Yonge subway in 1954 with a length of 7.4 kilometres (4.6 mi),^[11] and since then has grown to a length of 38.8 kilometres (24.1 mi). The modern line is U-shaped, having two northern terminals – at Vaughan Metropolitan Centre and Finch – and its southern end at Union station in downtown Toronto.
• Line 2 Bloor–Danforth, opened in 1966, runs parallel to Bloor Street and Danforth Avenue between Kipling station in Etobicoke and Kennedy station in Scarborough. Construction has started on a three-stop extension of Line 2 northeastward from Kennedy station to Sheppard Avenue and McCowan via Scarborough City Centre.^[12]
• Line 3 Scarborough, originally known as the Scarborough RT, is an elevated medium-capacity (light metro) rail line serving the city's eponymous suburban district. It opened in 1985, running from Kennedy station to McCowan station via Scarborough Centre. It is the only rapid transit line in Toronto to use Intermediate Capacity Transit System (ICTS) technology.^[13] Because of maintenance difficulties, Line 3 will be replaced by buses in 2023 and subsequently demolished. An extension of Line 2 to Scarborough City Centre is expected to replace the bus service in 2030.^[14]
• Line 4 Sheppard opened in 2002 running under Sheppard Avenue East eastwards from Sheppard–Yonge station on Line 1 to Don Mills station; it is the shortest rapid transit line in Toronto at a length of 5.5 kilometres (3.4 mi).^[15]

Two light rail lines are currently under construction:

• Line 5 Eglinton (also known as the Eglinton Crosstown) is an under-construction 19-kilometre (12 mi) light rail line along Eglinton Avenue, planned to run from Kennedy station in the east to Mount Dennis station in the west.^[16] The line is scheduled to open in 2022 at a cost of approximately $12 billion.^[17] The line will have 25 stations, 15 of which will be underground, while the remaining ten will be at-grade stops located in at the road's median. Construction began in 2011.^[18]
• Line 6 Finch West (also known as the Finch West LRT) is an under-construction 11-kilometre (6.8 mi), 18-stop light rail line travelling from Finch West station on Line 1 Yonge–University to the North Campus of Humber College, located mainly in the median of Finch Avenue. It is scheduled for completion in 2023, with an estimated cost of $1.2 billion. Construction on Line 6 began in 2019.^[19]

History[]

Timeline of openings[]

List of line, extension, and station openings of the Toronto subway

Date	Opening
March 30, 1954	The Yonge subway opened from Eglinton to Union station. It runs under or near Yonge Street and is part of today's Line 1 Yonge–University.[20]
February 28, 1963	The "University subway" opened from Union station to St. George. This was an extension of the Yonge subway and runs under University Avenue.[20]
February 25, 1966	Line 2 Bloor–Danforth opened from Keele to Woodbine. It runs under or near Bloor Street and Danforth Avenue.[20]
May 10, 1968	Bloor–Danforth subway extensions opened west to Islington and east to Warden.[20]
March 30, 1973	A Yonge subway extension opened from Eglinton to York Mills.[20]
March 29, 1974	A further Yonge subway extension opened from York Mills to Finch.[20]
January 27, 1978	The "Spadina subway", an extension of the "University subway", opened from St. George to Wilson.[20] This line was renamed to Yonge–University–Spadina subway.
November 21, 1980	Bloor–Danforth subway extensions opened west to Kipling and east to Kennedy.[20]
March 22, 1985	Line 3 Scarborough opened from Kennedy to McCowan.[20]
June 18, 1987	North York Centre on the Yonge–University subway opened. It was constructed between two existing stations, Sheppard–Yonge (formerly Sheppard) and Finch.[20]
March 31, 1996	A "Spadina subway" extension opened from Wilson to Sheppard West (formerly Downsview).
November 22, 2002	Line 4 Sheppard opened from Sheppard–Yonge to Don Mills. It runs under Sheppard Avenue.[20]
December 17, 2017	Line 1 Toronto–York Spadina Subway Extension (TYSSE) opened from Sheppard West to Vaughan Metropolitan Centre[21]

Line 1 Yonge–University[]

Canada's first subway, the Yonge subway, opened in 1954 with a length of 7.4 kilometres (4.6 mi). The line ran under or parallel to Yonge Street between Eglinton Avenue and Union station. It replaced the Yonge streetcar line, Canada's first streetcar line. In 1963, the line was extended northwards from Union station under University Avenue to Bloor Street, where it would later connect with the Bloor–Danforth subway (opened in 1966) at the double-deck St. George station. In 1974, the Yonge Street portion of the line was extended from Eglinton station north to Finch station. The Spadina segment of the line was constructed north from St. George station initially to Wilson station in 1978, and in 1996 to Downsview station, renamed Sheppard West in 2017. Part of the Spadina segment runs in the median of Allen Road – an expressway formerly known as the Spadina Expressway – and crosses over Highway 401 on a bridge. Six decades of extensions gave the line a U-shaped route running from its two northern terminals (Finch and Vaughan Metropolitan Centre stations) and looping on its southern end at Union station. The latest extension from Sheppard West to Vaughan Metropolitan Centre opened on December 17, 2017, making the line 38.8 kilometres (24.1 mi) long, over five times its original length.

Line 2 Bloor–Danforth[]

Opened in 1966, the Bloor–Danforth subway runs east–west under or near Bloor Street and Danforth Avenue. It replaced the Bloor streetcar line (which also served Danforth Avenue). Initially, the subway line ran between Keele station and Woodbine station. In 1968, the line was extended west to Islington station and east to Warden station, and in 1980, it was further extended west to Kipling station and east to Kennedy station.

Line 3 Scarborough[]

Opened in 1985, the Scarborough RT (today's Line 3) is a light metro line running from Kennedy station to McCowan station. The TTC started to construct the line to use Canadian Light Rail Vehicles. However, the provincial government forced the conversion to Intermediate Capacity Transit System technology because the province was funding the project and it owned a company that made the light metro vehicles. This line was never extended, and the current plan is to close and dismantle the line, replacing it with an extension of Line 2 to Scarborough Town Centre.

Line 4 Sheppard[]

Opened in 2002, the Sheppard subway runs under Sheppard Avenue from Sheppard–Yonge station to Don Mills station. The line was under construction when a change in provincial government threatened to terminate the project, but Mel Lastman, the last mayor of the former City of North York (today part of Toronto), used his influence to save the project. Despite the construction of many high-rise residential buildings along the line since its opening, ridership remains low resulting in a subsidy of $10 per ride^{[citation needed]}. The line was intended to be extended to Scarborough Centre station, but because of the low ridership and the cost of tunnelling, there was a plan to extend rapid transit eastwards from Don Mills station via a surface light rail line, the Sheppard East LRT. However, in April 2019, Premier Doug Ford announced that the provincial government would extend Line 4 Sheppard to McCowan Road at some unspecified time in the future, thus replacing the proposed Sheppard East LRT.^[22]

Line 5 Eglinton[]

Metrolinx is funding the 19-kilometre (12 mi) Line 5 Eglinton, a light rail line along Eglinton Avenue. From Mount Dennis in the west to Brentcliffe Road (east of Laird Drive), the line will run almost entirely underground where Eglinton Avenue is generally 4–5 lanes wide. From east of Brentcliffe Road to Kennedy station, the line will operate on the surface in a reserved median in the middle of Eglinton Avenue, where the street is at least 6 lanes wide. Building on the surface instead of tunnelling reduces the cost of construction on the eastern end of the line. The average speed of the line is expected to be 28 kilometres per hour (17 mph); as a comparison, the average speed of the heavy-rail Line 2 Bloor–Danforth is 32 kilometres per hour (20 mph). The Eglinton line originated from Transit City, a plan sponsored by then–Toronto mayor David Miller, to expedite transit improvement by building several light rail lines through the lower density parts of the city. Of the light rail lines proposed, only the Eglinton and Finch West lines are under construction as of 2021. It is estimated to be completed in 2022.

Line 6 Finch West[]

Line 6 Finch West, also known as the "Finch West LRT", is an under-construction line being built by along Finch Avenue.^[23][24] It is to be operated by the Toronto Transit Commission and was also part of the Transit City proposal announced on March 16, 2007. The 11-kilometre (6.8 mi), 18-stop line is to extend from Finch West station on Line 1 Yonge–University to the north campus of Humber College. The line is forecast to carry about 14.6 million rides a year or 40,000 a day by 2031. It is scheduled for completion in 2023, with an estimated cost of $1.2 billion. Construction on this line began in 2019.^[19]

Major incidents[]

On March 27, 1963, there was an electrical short in a subway car's motor. The driver decided to continue operating the train, despite visible smoke in the affected car, until the train reached Union station. This decision resulted in the destruction of six subway cars and extensive damage to the tunnel and signal lines west of Union station. Following this incident, safety procedures involving electrical malfunctions and/or fire in subway trains, were revised to improve safety and reduce the likelihood of a similar incident occurring.^{[citation needed]}

On October 15, 1976, arson caused the destruction of four subway cars and damage to Christie station, resulting in the closure of part of the Bloor–Danforth line for three days, and the bypassing of Christie station for some time afterwards for repairs.^{[citation needed]}

On August 11, 1995, the TTC suffered the deadliest subway accident in Canadian history, known as the Russell Hill accident, on the Yonge–University line south of St. Clair West station. Halfway between St. Clair West and Dupont stations, a southbound Line 1 subway train hit the rear of a stationary train ahead of it.^[25] Three people died and 100 other people were injured, some of them seriously. This led to a major reorganization at the TTC, with more focus on maintaining a "state of good repair" (i.e., an increased emphasis on safety and maintenance of existing TTC capital/services) and less on expansion.^[26]

Operations and procedures[]

Terminal station reversals and short turns[]

The heavy-rail subway lines were built in multiple segments with multiple crossovers. These are typically used for reversals at terminal stations, and allow arriving and departing trains to cross to and from the station's farside platform. They are also used for short turning trains at some through stations in order to accommodate emergency and planned service suspensions. Planned service suspensions generally occur on weekends for planned maintenance activities that are impractical to perform overnight.^[27] There is only one regular short turn service that occurs during the morning rush hour on Line 1 Yonge–University when some northbound trains short turn at Glencairn.^[28]

On Line 3 Scarborough, light metro trains cannot switch directions except at the ends of the line as there are no intermediate crossovers between the two termini. Thus, there can be no short turns on Line 3.

Door operation[]

The heavy-rail subway Lines 1 and 2 use a two-person crew, one to operate the train and another at the rear of the train to operate the doors. On October 9, 2016, Line 4 Sheppard was converted so that one person both drives the train and operates the doors.^[29] With a two-person crew, an on-board train guard is responsible for opening and closing the subway car doors and making sure no one is trapped in a door as the train leaves a station. From the subway's inception in 1954 to 1991, the train guard notified patrons that the subway car doors were closing with two short blasts from a whistle.^[30]

In a 2016 presentation, a timeline indicated Line 1 would be converted to one-person operation by 2019, and Line 2 would follow in 2021.^[31] This was the expected completion date for the implementation of automated train control (ATC). When ATC is fully implemented, it means that all train operations would be controlled entirely by computers and that there would no longer be a need for the train guard since all safety-related responsibilities would be transferred to the lone staff member aboard the train. However, due to delays in the implementation of this program, the expected completion date of ATC and therefore one-person operation on Line 1 has been pushed to 2022. According to a 2020 survey, two-thirds of Torontonians opposed the TTC's plan to eliminate the train guard on Line 1, and three-quarters of Torontonians disapproved of the fact that the public was not consulted when train guards were removed from Line 4's daily operations back in 2016, citing safety concerns, among other issues, as key reasons motivating their response.^[32][33] A similar survey conducted in 2021 yielded similar results: three-quarters of Torontonians were against one-person train operation, and two-thirds of Torontonians believed that it was either "very important" or "extremely important" that the public is consulted before one-person operation is implemented.^[34]

In 1991, as a result of lawsuits,^{[citation needed]} electronic chimes, in the form of a descending major triad and a flashing pair of orange lights above the doorway, added for the hearing impaired, were tested and gradually introduced system-wide during the 1990s. The Toronto Rocket trains use the same door chimes and flashing orange lights as the older trains do, and also plays the additional voice announcement, "Please stand clear of the doors". Those chimes have become synonymous with the TTC and Toronto to the point that the CBC Radio One local afternoon show, Here and Now, includes them in its theme music.^{[citation needed]}

Entering a station[]

There are several basic procedures that need to be completed once a train has entered a station. On TTC's Lines 1 and 2, several symbols of different colours are installed on the station wall for the crew to use as a reference in positioning the train in the platform. A red circle, located at the train exit end of the platform, should be directly in front of the train operator's cab window when the train is aligned properly. A green triangle, located at the opposite end of the platform, is provided as a reference to the train guard that shows that the train is correctly aligned.^[35] Before opening the train doors, the guard lowers the cab window and points their finger out the window toward the green triangle when the cab is lined up with the triangle. If the train is not lined up properly, the guard is not permitted to open the doors.^[36]

To operate the doors, the guard is first required to insert and turn a key. This action provides system control to the door control panel. The doors are then opened by pushing buttons. After the doors are opened, the guard is required to stick their head out the cab window to observe passengers boarding and exiting. The train doors remain open for at least 15 seconds.^[35]

When the guard determines that boarding is complete, the doors are closed. Electronic chimes and flashing lights are turned on, then the automated announcement "please stand clear of the doors" is played over the train's public address system, and finally the doors are closed. The chimes provide a clear notification and warning to passengers that the doors are closing and are played before the automated announcement is played, because such announcements may not be heard when the station is crowded.^[35]

After the doors are closed, the guard provides a signal to the train operator that the train can proceed. The signal is in the form of a green light that turns on inside the operating cab. When the doors are closed, a light turns on in the operating cab. The guard is instructed to visually observe the platform while the train departs the station. The distance for this visual inspection is typically three car lengths. An orange triangle^[36] installed on the station wall indicates the location where the guard may stop observing the platform and pull their head back into the cab.^[35] This is done to ensure that no passengers are being dragged along by the train.^[35]

Platform markers[]

All staffed subway operations must verify that the train is properly berthed before the doors are opened. At each subway platform, a set of three 15-centimetre-wide (6 in) platform markers are affixed onto the platform wall. The train operator and guard use them to position the train.

The current platform markers used for Lines 1, 2, and 4 are as follows:^[37][29]

Prior to 2017, when subway guards operated the doors from the fifth car instead of the trailing car in the T1 trains on Line 2, different platform markers were used. The following markers have now fallen into disuse as a result of a March 2017 policy change^[38] that required all guards to work from the trailing car on Line 2:

The platform markers previously used for Line 2 are as follows:

• Circular Green Disk (Line 2)—This marker was mounted on the station platform wall in front of the guard's window in the fifth car from the lead unit. It indicated to the guard that the train was properly berthed.^[39] The guard was required to point to the circle before opening the doors to confirm the stop position.^[40]
• Circular Orange Disk (Line 2)—This marker was mounted on the station platform wall to indicate to the guard when they could cease train departure platform observations. At this point, the guard closed the cab window.^[39]

Service frequency[]

Line	Off-peak frequency[5]	Rush hour frequency[5]
Yonge–University	3.5–5 minutes	2–3 minutes
Bloor–Danforth	3–5 minutes	2–3 minutes
Scarborough	6–7 minutes	5 minutes
Sheppard	5.5 minutes

During rush hour, up to 65 trains are on Line 1 simultaneously, 45 trains on Line 2, 5 trains on Line 3, and 4 trains on Line 4. During non-rush hour periods, there are 30–46 trains on Line 1 at any one time.

On weekdays and Saturday, subway service runs from approximately 6:00 am to 1:30 am; Sunday service begins at 8:00 am. Start times on holidays may vary.

Station announcements[]

On January 8, 1995, train operators began to announce each stop over the train's speaker system as a result of pressure from advocacy groups for the visually impaired, but announcements were sporadic until the TTC began to enforce the policy circa 2005. Later, automated announcements were implemented under further pressure from the advocacy groups.^[41][42] All Toronto subway trains use an automated system to announce each station which is played twice over the speaker system: when the train departs a station (e.g. "The next station is: Dufferin, Dufferin station") and when it arrives at the following station (e.g. "Arriving at: Dufferin, Dufferin station"). In addition, the TTC's new Toronto Rocket subway trains provide visible and audible automatic stop announcements. Unlike the other trains, the Rockets also announce interchange stations, such as "Change for Line 2", and terminus stations, "This is a terminal station" where applicable. As of 2015, they also announce, except at terminus stations, which side the train doors will open on at each stop based on direction of train travel.^[42]

Winter operations[]

Switches and power rails are vulnerable to malfunction under extreme winter conditions such as heavy snow or freezing rain. During such events, the TTC runs "storm trains" overnight along subway lines to keep power rails clear of ice. The TTC also has trains to apply an anti-freeze to the power rail once freezing rain starts.^[43]

These precautions were also used on Line 3 Scarborough, which uses two power rails.^[43] After reviewing operations during the Northern Hemisphere's winter of 2018–2019, the TTC decided to change its procedures for Line 3. Thus, about two hours before an expected storm, the TTC may decide to shut down Line 3 and replace it with bus service.^[44]

To keep switches in the yards from freezing, crews use switch heaters and manually monitor them to ensure they stay in working order during winter storms. Workcars are run as storm trains within the yards to prevent ice from building up on the power rails.^[43]

Stations[]

The Toronto subway has 75 stations divided into four lines. Most stations are named for the nearest major arterial road crossed by the line in question. A few are named for major landmarks, such as shopping centres or transportation hubs, served by the station. The stations along the University Avenue section of the Yonge–University line, in particular, are named entirely for landmarks and public institutions (Museum, Queen's Park, and Osgoode) and major churches^{[citation needed]} (St. Patrick and St. Andrew). All trains, except for short turns, stop at every station along their route and run the entire length of their line from terminus to terminus. Nearly all stations outside the central business district have terminals for local TTC bus routes and streetcar routes situated within their fare-paid areas. (All regular TTC bus and streetcar routes permit free transfers both to and from connecting subway lines.)

By December 23, 2016, Presto card readers had been installed in at least one priority subway station entrance across the TTC network.^[45] Throughout 2017 and into mid-2018, the remaining subway station entrances that still use legacy turnstiles (which were retrofitted with Presto readers between 2010 and 2015) and the "floor-to-ceiling" revolving turnstiles (found in automatic/secondary entrances, which do not have Presto readers on them) were replaced by the new Presto-equipped "glass-paddle" fare gates.

Accessibility[]

A growing number of Toronto's subway stations are accessible to wheelchair users in general and riders with accessibility issues. Upgrade plans to stations call for all stations to be barrier-free and have elevator access by 2025. Sheppard West station was the first station to be fully accessible when it opened in 1996.

Cleanliness[]

This article needs to be updated. Please help update this article to reflect recent events or newly available information. (May 2020)

The May 2010 TTC cleanliness audit of subway stations found that none of them meets the transit agency's highest standard for cleanliness and general state of repair. Only 21 stations scored in the 70–80% range in the TTC's cleanliness scale, a range described as "Ordinary Tidiness", while 45 fell in the 60–70% range achieving what the commission describes as "Casual Inattentiveness". The May audit was the third in a series of comprehensive assessments that began in 2009. The commission announced a "Cleaning Blitz" that would add 30 new temporary cleaners for the latter part of 2010 to address major issues and has other action plans that include more full-time cleaners, and new and more effective ways at addressing station cleanliness.^[46][47]

Design and public art[]

According to a 1991 CBC report, "aesthetics weren't really a priority" on Toronto's subway system describing stations as "a series of bathrooms without plumbing."^[48] Since that time, Toronto's subway system has had over 30 pieces installed in various subway stations. More art appears as new stations are built and older ones are renovated. The main article (above) has a list of artwork by line and station.

For example, USA Today said of the Sheppard subway line: "Despite the remarkable engineering feats of this metro, known as Sheppard Subway, [it is] the art covering walls, ceilings, and platforms of all five stations that stands out. Each station is 'a total art experience where artists have created imaginative environments, uniquely expressing themes of community, location, and heritage' through panoramic landscapes and ceramic wall murals."^[49]

Internet and mobile phone access[]

On December 13, 2013, Wi-Fi Internet access was launched at Bloor–Yonge and St. George stations. The ad-supported service (branded as "TConnect") is provided by BAI Canada, who have agreed to pay $25 million to the TTC over a 20-year period for the exclusive rights to provide the service. TTC/BAI Canada plan to offer TConnect at all underground stations.^[50] Commuters have to view a video advertisement to gain access to the Internet.^[51] It is expected that all of the 69 subway stations will have service by 2017, as well as the six stations along the Line 1 extension to Vaughan.^[52] From early December 2015 to late January 2016, users of TConnect were required to authenticate themselves using a Twitter account, whose Canadian operations sponsored the TConnect Wi-Fi network.^[53] Users of the network can sign in to enable an automatic Wi-Fi connection for 30 days. This arrangement was resumed on an optional basis from July 2016 to late November/early December 2016.

As of August 2017, the Wi-Fi network is available at all existing stations, including the TYSSE stations, and will be available in all future stations.^[54]

On June 17, 2015, the TTC announced that Wind Mobile (later rebranded Freedom Mobile) customers could access cellular connectivity at some TTC subway stations.^[55] BAI Canada has built a shared Wi-Fi and cellular infrastructure for the TTC that allows any wireless carrier to sign on and provide underground cellular service to their customers. Wind, as the launch carrier, had a one-year period of exclusivity, which expired in June 2016. Since July 1, 2016, the shared cellular DAS had been open for other carriers to join. By October 2020, none of the other carriers had yet joined. Cellular services are available at 28 stations with service at additional stations having been added in December 2016, including the stations in the extension to Vaughan Metropolitan Centre station since December 2017. The tunnels from Vaughan Metropolitan Centre station to Sheppard West station and from St. George station to Bloor–Yonge station also have cellular service.^[56]

Naming[]

The TTC considers multiple different factors when they name stations and stops for subway and LRT stations. They consider local landmarks, the cross streets of the station, distinct communities of the past and present in the vicinity of the station, names of other stations in the system, and the grade of the station.^[57]

Metrolinx uses five criteria for naming stations and stops. These are:^[58]

1. Simplicity
2. Names must be logical and relevant to the area the station is built in
3. Names should be relevant for the life of the station
4. Names should help passengers locate themselves within the region
5. Uniqueness

Metrolinx also uses the word "stop" in place of "station" at 10 of the 25 stations along Line 5, particularly those that are not grade-separated.^[59]

Rolling stock[]

The following table shows the vehicle type by line:^[60]

Line	Vehicle	Number of vehicles	Vehicles per train	Passenger capacity per train
Yonge–University	Toronto Rocket (TR)	456[60][a]	6[61]	1080[61]
Bloor–Danforth	T series (T1)	370[60]	6[61]	1000[61]
Scarborough	S series (UTDC ICTS Mark 1)	28[60]	4[61]	220[61]
Sheppard	Toronto Rocket (TR)	24[60][b]	4[62]	720[c]
Under construction
Eglinton	Bombardier Flexity Freedom	76[63]	2[64]	163–490[64]
Finch West	Alstom Citadis Spirit[65]	17[65]	1	336[66]

Heavy rail stock[]

Lines 1, 2 and 4 use two types of vehicles: the new Toronto Rocket (TR) trains on Line 1 Yonge–University and Line 4 Sheppard, and the older T1 trains on Line 2 Bloor–Danforth.^[67]

The TTC's original G-series cars were manufactured by the Gloucester Railway Carriage and Wagon Company. All subsequent heavy-rail subway cars were manufactured by Bombardier Transportation or one of its predecessors (Montreal Locomotive Works, Hawker Siddeley, and UTDC). All cars starting with the Hawker Siddeley H series in 1965 have been built in Bombardier's Thunder Bay, Ontario, plant. The final H4 subway cars were retired on January 27, 2012.^[68] This was followed by the retirement of the H5 subway cars, which had their final in-service trip on June 14, 2013, and the H6 retirement, which followed one year later with a final run on June 20, 2014.

Following the introduction of the Toronto Rockets on Lines 1 and 4, all the T1 trains were moved to Line 2. The T1s were expected to last until 2026;^[69][70] however, by the end of 2019, the TTC had proposed an overhaul to extend the T1 fleet's life by 10 years.^[71] By mid-2020, the TTC had started the design phase for a new generation of subway trains to replace the T1 fleet on Line 2 Bloor–Danforth. The new trains would be introduced between 2026 and 2030.^[72]

Light metro stock[]

Line 3 Scarborough uses 28 S-series trains built by the Urban Transportation Development Corporation (UTDC) in Millhaven, Ontario. These Intermediate Capacity Transit System (ICTS) trains are Mark I models, similar in design to the original trains found on the Vancouver SkyTrain. These are the original vehicles of the line and have been in service since the line's opening in 1985. Because of the trains' age, they have been refurbished for operation and initially intended to last until the extension of Line 2 Bloor–Danforth is built. In February 2021, the TTC board recommended that S-series trains should be retired in 2023 with the closure of Line 3. This was due to delays in planning and construction of the subway extension (which is was then projected to open in 2030 at the earliest) along with the increasing difficulty of performing critical maintenance work on the trains.^[73][74][75]

Light rail stock[]

Metrolinx plans to use 76 Bombardier Flexity Freedom low-floor, light-rail vehicles for Line 5 Eglinton; however, 44 Alstom Citadis Spirit vehicles may be used if Bombardier is unable to deliver the Flexity Freedom on time. Such a substitution would require modifications to Line 5, especially the maintenance facility, as the Citadis Spirit is longer than the Flexity Freedom. Metrolinx intends to use 17 Citadis Spirit vehicles on the planned Line 6 Finch West instead of the Flexity Freedom.^[76]

Comparison of light rail vehicles^[76]

Vehicle	Alstom Citadis Spirit	Bombardier Flexity Freedom
Length	48.4 m (159 ft)	31.9 m (105 ft)
Maximum capacity	292	164
Maximum speed	100 km/h (62 mph)	80 km/h (50 mph)

Technology[]

Technology	Lines used	Vehicle floor type	Track gauge	Electrical type	Electrical feed	Electrical pickup
Heavy rail		High floor	4 ft 10+7⁄8 in (1,495 mm) Toronto gauge	600 V DC	Third rail	Bogie-mounted shoe
Light metro		High floor	4 ft 8+1⁄2 in (1,435 mm) standard gauge	600 V DC	Third, fourth rail and fifth rail, linear induction	Bogie-mounted shoe
Light rail		Low floor	4 ft 8+1⁄2 in (1,435 mm) standard gauge	750 V DC	Overhead wire	Roof-mounted pantograph

The heavy rail and light metro lines have some characteristics in common: Such lines are fully isolated from road traffic and pedestrians; the station platforms are covered, and the trains are boarded through many doors from high platforms within a fare-paid zone separated by faregates.

In contrast, the surface portions of the light rail lines (Lines 5 and 6) will fit into the street environment. Light-rail tracks will be laid on the surface within reserved lanes in the middle of the street, and cross street intersections at grade. Surface stations will have simple, low-level platforms. However, like heavy rail and light metro, passengers will be able to board and alight the light rail trains by multiple doors.^[77]

The light metro on Line 3 uses a more complex technology than heavy rail, which a TTC document describes as follows:

Track is the 5 rail system on direct fixation and car is powered by an induction or "reaction rail" situated between the running rails at the same top of rail elevation. There are two side contacting power rails +300V and −300V respectively situated a distance of about 14 in. from the closest gauge line of one running rail.^[78]

Signals[]

Heavy rail[]

Fixed block signalling has been used throughout the subway system since the opening of Toronto's first subway in 1954.^[79][80] As of December 2018, fixed block signalling is used on most of Line 1 and on the full length of lines 2 and 4. Along with automatic signalling, used to prevent rear-end train collisions, interlocking signals are used to prevent collisions from conflicting movements on track crossovers.

In 2009, the TTC awarded a contract to Alstom to upgrade the signalling system of the existing section of Line 1, as well as equip its extension into Vaughan, with moving block-based communications-based train control (CBTC) by 2012.^[81] This automatic train control (ATC) project will cost $562 million, $424 million of which is funded by Metrolinx. With ATC, the TTC will be able to reduce the headway between trains from 2.5 minutes to 2 minutes during rush hours, and allow a 25 percent increase in the number of trains operating on Line 1.^[79]

Deadlines for the complete conversion of Line 1 were pushed back to 2016 and again to 2018.^[79] The first section of the "Urbalis 400" ATC system on Line 1 entered revenue service on December 17, 2017, between Sheppard West to Vaughan Stations in conjunction with the opening of the TYSSE project.^[82] In December 2018, ATC operation was extended south from Sheppard West to Dupont, and was planned to be cover the whole line by 2019.^[83] By December, it was revealed that ATC conversion will not be complete by 2019.^[84] ATC is now scheduled to be fully deployed in phases on the remainder of Line 1 by 2022.^[85] The TTC then plans to convert Line 2 to ATC by 2030 subject to the availability of funding.^[86]

Once ATC is activated, it would be possible to install platform screen doors as ATC would allow trains to stop at a precise position along the platform and line up train doors with platform doors. The cost to install platform doors at all stations on Lines 1, 2 and 4 could cost more than $1 billion. Future lines, such as the Ontario Line could be built to operate with ATC and platform doors from the day of opening. The benefits of platform doors would be:^[87]

• Blocking those attempting suicide or trespassers from the tracks: it takes 70 to 90 minutes to resume operations each time there is a personal injury at track level.
• Eliminating fires from debris falling on the tracks and the third rail.
• Allowing trains to enter crowded stations at speed, thus speeding up service along the line.

Light metro[]

Line 3 Scarborough has been equipped with automatic train control from the outset, using the same SelTrac IS system as Vancouver's SkyTrain, meaning it could be operated autonomously. However, the TTC opts to equip each S-series train with an operator on board for door monitoring.^[13]

Light rail[]

When completed, Line 5 Eglinton will use Bombardier Transportation's Cityflo 650 CBTC automatic train control on the underground section of the line between Laird station and Mount Dennis station, along with the Eglinton Maintenance and Storage Facility (under construction since 2019) adjacent to Mount Dennis station.^[88]

Track[]

Lines 1, 2 and 4 – the heavy-rail lines – run on tracks built to the Toronto gauge of 4 ft 10+7⁄8 in (1,495 mm), the same gauge used on the Toronto streetcar system. According to rail historians John F. Bromley and Jack May, the reason that the Yonge subway was built to the streetcar gauge was that between 1954 and 1965, subway bogies were maintained at the Hillcrest Complex, where the streetcar gauge was used for shop tracks. The Davisville Carhouse was not equipped to perform such heavy maintenance, and the bogies would be loaded onto a specially built track trailer for shipment between Davisville and Hillcrest. This practice ceased with the opening of the shops at the Greenwood Yard in 1965.^[89]

Line 3 Scarborough uses standard-gauge tracks, as the ICTS design for the line did not allow for the interchange of rail equipment between the subway system and Line 3.^[90] When its ICTS vehicles need anything more than basic service (which can be carried out at the McCowan Yard), they are carried by truck to the Greenwood Subway Yard.^[91]

The Line 5 Eglinton and Line 6 Finch West LRT lines will be constructed with standard-gauge tracks. The projects are receiving a large part of their funding from the Ontario provincial transit authority Metrolinx and, to ensure a better price for purchasing vehicles, it wanted to have a degree of commonality with other similar projects within Ontario.^[92]

Facilities[]

The subway system has the following yards to provide storage, maintenance and cleaning for rolling stock. All yards are located above ground.

Facilities	Year opened	Lines served	Remarks
Davisville Yard	1954
Greenwood Yard	1966
Keele Yard	1966		Closed in 1978; reopened June 18, 2017[93]
McCowan Yard	1985
Wilson Yard	1977
Eglinton MSF	2022		Under construction
Finch MSF	2023		Under construction

In the second quarter of 2018, the City Of Toronto moved to expropriate the disused Canadian Pacific at 30 Newbridge Road / 36 North Queen Street in Etobicoke for use as a potential future yard at the western end of Line 2 Bloor–Danforth.^[94] The yard is situated immediately to the southwest of Kipling station, the western terminus of Line 2.

Safety[]

There are several safety systems for use by passengers in emergencies:

• Emergency alarms (formerly "Passenger assistance alarms"): Located throughout all subway trains – When the yellow strip is pressed, an audible alarm is activated within the car, a notification is sent to the train crew and the Transit Control Centre, which in turn dispatches a tiered response. An orange light is activated on the outside of the car with the alarm for emergency personnel to see where the problem is.^[95]
• Emergency power cut devices: Marked by a blue light, located at both ends of each subway platform – For use to cut DC traction power in the event a person falls or is observed at track level or any emergency where train movement into the station would be dangerous. These devices cut power in both directions for approximately one station each way.^[96]
• Emergency stopping mechanisms (PGEV: passenger/guard emergency valve): Located at each end of each subway car (with exception of the Toronto Rocket trains) – Will activate the emergency brakes of the vehicle stopping it in its current location (for use in extreme emergencies, such as persons trapped in doors as train departs station, doors opening in the tunnel, derailments etc.)^[96]
• Passenger intercoms: Located on subway platforms and near/in elevators in stations – For use to inform station collector of security/life safety issues^[95]
• Automated external defibrillators (AEDs): Located in several subway stations near the collector booth(s) – For use in the event someone suffers cardiac arrest
• Public telephones: Located in various locations in all stations, and at the Designated Waiting Area's on each subway platform. Emergency calls can be made to 911 toll free.^[95] Phones located at the DWAs also include a "Crisis Link" button that connect callers, free of charge, to a 24-hour crisis line in the event that they are contemplating self-harm.

A trial program began in 2008 with Toronto EMS and has been expanded and made permanent, with paramedics on hand at several stations during peak hours: Spadina and Bloor–Yonge (morning peak: 7 am–10 am) and Union and Eglinton (evening peak: 2 pm–6 pm)^[97]

Training[]

Subway operators begin their training at Hillcrest with a virtual reality mockup of a Toronto Rocket car. The simulator consists of the operator cab with full functions, a door and partial interior of a subway car. The simulator is housed in a simulated subway tunnel. Construction of a new subway training centre is underway at the Wilson Complex, as part of the Toronto Rocket subway car program.^[98]

Expansion plans[]

Provincially supported projects[]

On April 10, 2019, Premier Doug Ford announced rapid transit–related projects that the Province of Ontario would support with either committed or future financing.^[99] One such project is the Ontario Line, a proposed 15.5-kilometre (9.6 mi) rapid transit line that has succeeded the Relief Line proprosal. Initially the project was projected to be completed in 2027,^[100] but this was later pushed back to 2030.^[101]

The Line 5 West Extension to Pearson Airport is a proposal to extend Line 5 Eglinton from its terminus at Mount Dennis station west along Eglinton Avenue West to the proposed Pearson Transit Hub in Mississauga. In April 2019, Ontario premier Doug Ford said that he would commit funds for this proposal.^[102]

The Yonge North Subway Extension (YNSE) is a proposal to extend Line 1 Yonge–University north along Yonge Street from Finch station, the existing terminus of Line 1, to near Highway 7 in Richmond Hill. There would be new stations at Steeles Avenue, Clark Avenue, between Highway 7 and Highway 407 near Langstaff GO Station and Richmond Hill Centre Terminal (dubbed "Bridge station"), and High Tech Road.^[103][104] The extension was proposed in the province's 2007 MoveOntario 2020 plan. A major problem with this proposal is that Line 1 is at capacity, and the TTC has said that the Relief Line and SmartTrack must both be in service before opening the YNSE.^[105] The project is projected to be completed by 2030.^[106]

The Scarborough Subway Extension (SSE) is a proposal to replace Line 3 Scarborough with an eastward extension of Line 2 Bloor–Danforth. On October 8, 2013, Toronto City Council conducted a debate on whether to replace Line 3 with a light rail line or a subway extension. In 2014, the city council voted to extend Line 2 to Scarborough City Centre, which would result in the closure of Line 3.^[107][108] The SSE would be 6 kilometres (3.7 mi) long and add one new station to Line 2 at Scarborough Town Centre. TTC and city staff finalized the precise route of the SSE in early 2017.^[109] In 2019, the Government of Ontario proposed a modified version of the proposal now known as the Line 2 East Extension (L2EE). The L2EE is 7.8 kilometres (4.8 mi) long and adds three new stations, rather than one.^[110] The proposed completion deadline for the project is between 2029 and 2030.^[111]

The Line 4 East Extension to McCowan is a proposal to extend Line 4 Sheppard east along Sheppard Avenue East to McCowan Road, where it is set to link with the Scarborough Subway Extension. Doug Ford said in April 2019 that he would commit funds related to this proposal.^[112]

Other proposals[]

The Line 5 East Extension to Malvern is a proposal to extend Line 5 Eglinton east to Malvern. This proposal was originally part of the cancelled Scarborough–Malvern LRT in Transit City. It would have stations at Eglinton GO and Guildwood GO, as well as the University of Toronto Scarborough campus.^[113]

The Jane LRT is a proposed LRT line that would begin at Jane station on Line 2 and proceed north to Pioneer Village station on Line 1. While initially part of the cancelled Transit City plan, the Jane LRT is part of the 2018–2022 TTC Corporate Plan and tentatively referred to as Line 8.^[114]

The Line 4 West Extension to Sheppard West station is a proposal that would extend Line 4 Sheppard west along Sheppard Avenue West to Sheppard West station, where it would link to Line 1 Yonge–University. It is currently listed as an "unfunded future rapid transportation project" in the City of Toronto's 2013 Feeling Congested? report.

The Line 6 East Extension to Finch station is a proposal that would extend Line 6 Finch West east along Finch Avenue West to Finch station, where it would link up with Line 1 Yonge–University. In March 2010, the Ontario government eliminated the proposed section of line between Finch West station and Finch station because of budget constraints. This section of the line was part of the original Transit City proposal. In 2013, this plan was revived as an "unfunded future rapid transit project" in the City of Toronto's Feeling Congested? report, meaning this extension may be constructed sometime in the future. The extension was later shown in the 2018–2022 TTC Corporate Plan with no timeline for completion.

Along with a proposal to extend Line 6 to Finch station, there was another proposal that would have extended the line farther to Don Mills station, where it would have provided a connection to Line 4 Sheppard. In May 2009, Metrolinx proposed that the line be extended from Finch station along Finch Avenue East and Don Mills Road into Don Mills station to connect with the Sheppard East LRT and create a seamless crosstown LRT line in northern Toronto to parallel the Eglinton Crosstown LRT (later designated Line 5 Eglinton) in central Toronto. The TTC said that a planning study would have commenced in 2010.

The Line 6 West Extension to Pearson Airport is a proposal that would extend Line 6 Finch West west to Pearson Airport, where it would provide a link to Line 5 Eglinton. In 2009, the TTC studied the feasibility of potential routings for a future westward extension of the Etobicoke–Finch West LRT to the vicinity of the Woodbine Live development, Woodbine Mall, and Pearson International Airport. This extension was later reclassified as a future transit project as described in the 2013 Feeling Congested? report by the City of Toronto. Metrolinx revealed in January 2020 that they would study a possible connection to the Pearson Transit Hub at Pearson Airport.^[115]

Abandoned plans[]

The Queen subway line was a subway line first proposed in 1911. When Line 1 was first built, a roughed-in station was included under Queen station, with the intention that the Queen subway would be the city's second subway line. The route of the Queen subway line is included in the routes for both the Relief Line and the Ontario Line proposals.^[114]

The Eglinton West line was a proposed subway line in the late 1980s and early 1990s. It was cancelled with the election of Mike Harris. Much of its route is included in Line 5 Eglinton.^[114]

One proposed expansion of Line 2 Bloor–Danforth into Mississauga included eight potential stations stretching west from Kipling station to Square One Shopping Centre and Mississauga City Centre, retrofitting some existing GO Transit stations. The plan was for the subway stations to open in 2011. Mississauga mayor Hazel McCallion and the Regional Municipality of Peel did not support the project.^[116]

The Relief Line was a proposed heavy-rail subway line running from Pape station south to Queen Street East and then west to the vicinity of Toronto City Hall. The proposal included intermediate stations at Sherbourne Street, Sumach Street, Broadview Avenue, and another near Gerrard Square. In January 2016, alignment options and possible stations were still being studied, and the project was unfunded. Construction was expected to take about 10 years to complete.^[117] As early as 2008, Metrolinx chair Rob MacIsaac expressed the intent to construct the Relief Line to prevent overcrowding along Line 1.^[118] Toronto City Council also expressed support for this plan.^[119] In April 2019, the Government of Ontario under Doug Ford announced that the Ontario Line would be built instead of the Relief Line. As a result, TTC and City of Toronto staff suspended further planning work on the Relief Line in June 2019.^[120]

Transit City[]

The Sheppard East LRT was a proposed light rail line running east from Don Mills station to Morningside Avenue in Scarborough. The line was to be 13 kilometres (8.1 mi) long with 25 surface stations and one underground connection at Don Mills station on Line 4 Sheppard. Construction of the Sheppard East LRT was to start upon completion of Line 6 Finch West.^[121] However, in July 2016, the Toronto Star reported the Sheppard LRT had been deferred indefinitely.^[63] In April 2019, Premier Doug Ford announced that the provincial government would extend Line 4 Sheppard to McCowan Road at some unspecified time in the future, replacing the proposed Sheppard East LRT.^[22]

The Don Mills LRT was a proposed LRT line that would have headed north from Pape station along Don Mills to Don Mills station. Its route was later incorporated into the Relief Line and Ontario Line proposals.^{[114][additional citation(s) needed]}

The Scarborough Malvern LRT was a proposed LRT line from Kennedy station east to the University of Toronto Scarborough. Its route was later incorporated into a proposed eastern expansion of Line 5 Eglinton.^[114]

See also[]

References[]

Notes[]

Sources[]

• "Transit Toronto Subway Pages". Transit Toronto. Retrieved July 21, 2007.
• Bow, James (June 14, 2007). "Toronto's Lost Subway Stations". Transit Toronto. Retrieved July 21, 2007.
• "Thirty Years down the line". Toronto Star. March 1984. pp. M1, M9.
• Welcome Aboard – Tomorrow's Transit Today – UTDC 1985
• "Rapid Transit Expansion Study (RTES)" (PDF). TTC. August 2001. Archived from the original (PDF) on April 19, 2006.
• "Rapid Transit Expansion Study (RTES) – Follow-Up Report" (PDF). TTC. June 12, 2002. Archived from the original (PDF) on February 21, 2006.
• "Spadina Subway Extension". TTC. 2011. Archived from the original on July 24, 2010.

External links[]

Wikimedia Commons has media related to Toronto subway.

Route map:

( • help)

• Official TTC site
• Official TTC Subway Map
• News, history and discussion
• CBC Digital Archives: Going Underground: Toronto's Subway and Montreal's Metro
• The TTC's Official Subway Travel Time Chart (archived version using the way back machine)
• The TTC ride guide as searchable Google Map
• Vivanext Subways – Yonge extension projects
• The Subway Comes to the Archives, online exhibit on Archives of Ontario website