Trifluoromethanol

From Wikipedia, the free encyclopedia
Trifluoromethanol
Trifluoromethanol.png
Names
Preferred IUPAC name
Trifluoromethanol
Other names
Trifluoromethyl alcohol, perfluoromethanol
Identifiers
3D model (JSmol)
ChemSpider
  • InChI=1S/CHF3O/c2-1(3,4)5/h5H
    Key: WZCZNEGTXVXAAS-UHFFFAOYSA-N
  • C(O)(F)(F)F
Properties
CHF3O
Molar mass 86.013 g·mol−1
Appearance Colorless liquid
Density 1.5±0.1 g/cm3
Melting point -110.64
Boiling point 22.4 °C (72.3 °F; 295.5 K) ±30.0°C
Hazards
Flash point 18.9 °C (66.0 °F; 292.0 K) ±15.6°
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Trifluoromethanol is the organic compound with the formula CHF
3
O
.[1] It is also referred to as perfluoromethanol or trifluoromethyl alcohol. The compound is the simplest perfluoroalcohol.[2] The substance is a colorless gas, which is unstable at room temperature.

Synthesis[]

Like all primary and secondary perfluoroalcohols, trifluoromethanol eliminates hydrogen fluoride in an endothermic reaction[3] and forms carbonyl fluoride.[4]

CF
3
OH
COF
2
+ HF (I)

At temperatures in the range of -120 °C, trifluoromethanol can be prepared from trifluoromethoxy chloride and hydrogen chloride:

CF
3
OCl
+ HClCF
3
OH
+ Cl
2
(II)

In this reaction, the recombination of a partially positively charged chlorine atom (in trifluoromethoxy chloride) with a partially negatively charged chlorine atom (in hydrogen chloride) is used as elemental chlorine. The undesired products, by-products chlorine, hydrogen chloride, and chlorotrifluoromethane, can be removed by evaporation at -110 °C. Trifluoromethanol has a melting point of -82 °C and a calculated boiling point of about -20 °C. The boiling point is thus about 85 K lower than that of methanol. This fact can be explained by the absence of intramolecular H—F bonds, which are also not visible in the infrared gas phase spectrum.

A simpler synthesis uses the reaction (I); an equilibrium can be shifted to the thermodynamically preferred trifluoromethanol at lower temperatures. If the synthesized trifluoromethanol is protonated by superacids, for example HSbF
6
(fluoroantimonic acid), the equilibrium can be further shifted to the left towards the desired product.

Similar to reaction (I), trifluoromethoxides (CF
3
O
) can be prepared from saline-type fluorides (e.g., NaF) and carbonyl fluoride. However, if the CF
3
O
ion is, for example, in an aqueous solution displaced by an acid, trifluoromethanol decomposes at the room temperature.

Occurrence in upper layers of atmosphere[]

While trifluoromethanol is unstable under normal conditions, it is generated in the stratosphere from CF
3
and CF
3
O
radicals by reaction with OF+
and F
radicals. In this case, decomposition of trifluoromethanol is negligible under the conditions prevailing in the atmosphere due to the high activation energy of the reaction. The expected lifetime of trifluoromethanol is several million years at altitudes below 40 km.[5][6]

See also[]

  • Trifluoroethanol

References[]

  1. ^ Kloeter, Gerhard; Seppelt, Konrad (January 1979). "Trifluoromethanol (CF3OH) and trifluoromethylamine (CF3NH2)". J. Am. Chem. Soc. 101 (2): 347–349. doi:10.1021/ja00496a012.
  2. ^ Seppelt, Konrad (May 1977). "Trifluoromethanol, CF3OH". Angewandte Chemie International Edition in English. 16 (5): 322–323. doi:10.1002/anie.197703221.
  3. ^ Schneider, W. F. (April 11, 1996). "Energetics and Mechanism of Decomposition of CF3OH". J. Phys. Chem. 100 (15): 6097–6103. doi:10.1021/jp952703m.
  4. ^ Seppelt, K. (1977). "Trifluormethanol, CF3OH. In: , ". Angew. Chem. (in German). 325 (89): 325. doi:10.1002/ange.19770890509.
  5. ^ Schneider, W. F. (January 1995). "Atmospheric Chemistry of CF3OH: Is Photolysis Important?". Environmental Science & Technology. 29 (1): 247–250. Bibcode:1995EnST...29..247S. doi:10.1021/es00001a031. PMID 22200226.
  6. ^ Wellington, T. J.; Schneider, W. F. (1994). "The Stratospheric Fate of CF3OH. In: Environmental Science & Technology 28/1994, S.". Environ. Sci. Technol. 28 (6): 1198–1200. doi:10.1021/es00055a036. PMID 22176252.
Retrieved from ""