Kerr Mill
Kerr Mill | |
![]() Kerr Mill, September 2012 | |
![]() ![]() | |
Location | W of Mill Bridge on Sloan Rd., S of NC 1768, near Mill Bridge, North Carolina |
---|---|
Coordinates | 35°31′11″N 80°25′21″W / 35.51972°N 80.42250°WCoordinates: 35°31′11″N 80°25′21″W / 35.51972°N 80.42250°W |
Area | 6 acres (2.4 ha) |
Built | c. 1820 |
NRHP reference No. | 76001337[1] |
Added to NRHP | May 11, 1976 |
Kerr Mill is a historic grist mill building located near Mill Bridge, Rowan County, North Carolina. It was constructed in 1823 by Joseph Kerr, a large plantation owner. The mill is a brick building with two-stories and three bay by two bay. It rests on a stone foundation and has a gable roof. The mill was operated commercially until the 1940s and has since been refurbished as part of Sloan Park run by Rowan County.[2] The mill and surrounding property are operated by Rowan County as Sloan Park.[3]
It was listed on the National Register of Historic Places in 1976.[1]
History[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2a/Rowan_County_Map_1833.tif/lossy-page1-220px-Rowan_County_Map_1833.tif.jpg)
The Kerr Mill was constructed by Joseph Kerr in 1823 on his 1,500 plantation, called Oakland, between Sills and Cathey's Creeks in Rowan County, North Carolina. After Joseph's death, the mill was run by his son, Dr. Samuel Kerr. Samuel Kerr was destroyed financially by the U.S. Civil War. After the war the mill was operated on a small scale from 1865–1872 for local tenant farmers. The mill and Kerr plantation were purchased by James Samuel McCubbins in 1872. The mill was then run using an undershot wheel fed by a long mill race and canal. In 1887 the mill was upgrade to a roller mill powered by a steam engine. The mill was purchased by John W. Page in 1895, Pleasant Owen Tatum in 1900, and James Wiseman Sloan in 1908. The mill was converted to run with a Bessemer diesel engine in 1925. The mill was sold to James W. Sloan's nephew, James Andrew Sloan in 1928. The mill was offered as a gift to the citizens of Rowan County in 1973 by James Sloan and his wife. It has since been restored and become part of Sloan Park operated by Rowan County's Department of Parks and Recreation.[4][5]
References[]
- ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
- ^ Joe Mobley and Charles Greer Suttlemyre, Jr. (April 1976). "Kerr Mill" (pdf). National Register of Historic Places - Nomination and Inventory. North Carolina State Historic Preservation Office. Retrieved 2015-02-01.
- ^ Cheeseman, Bruce S. (May 14, 1979). "Historical Research Report, Kerr Mill and Mill Bridge Communities, Rowan County, North Carolina". North Carolina Department of Cultural Resources. Retrieved July 4, 2019.
- ^ "Kerr Mill". Rowan County Parks & Recreation. Retrieved July 5, 2019.
- ^ "Kerr Mill, Sloan Road (State Route 1768), Mill Bridge, Rowan County, NC Drawings from Survey HABS NC-148". Retrieved July 6, 2019.
External links[]
- "Sloan Park history". RowanCountyNC.gov. Retrieved July 4, 2019., New Link
- Grinding mills in North Carolina
- Grinding mills on the National Register of Historic Places in North Carolina
- Industrial buildings completed in 1820
- Buildings and structures in Rowan County, North Carolina
- National Register of Historic Places in Rowan County, North Carolina
- Central North Carolina Registered Historic Place stubs