Ningbo–Taizhou–Wenzhou railway

Hangzhou–Fuzhou–Shenzhen
high-speed railway
Ningbo–Taizhou–Wenzhou Section
杭福深高速铁路甬台温段
Hangzhou–Fuzhou–Shenzhen; high-speed railway Ningbo–Taizhou–Wenzhou Section; 杭福深高速铁路甬台温段
	Yongtaiwen Railway Bridge over the Fenghua River
Overview
Status	Active
Owner	China Railway
Termini	Ningbo; Wenzhou South
Stations	13 (12 active)
Service
Type	High-speed rail,; Heavy rail
Operator(s)	China Railway High-speed
Technical
Line length	275 km (171 mi)
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Route map
	Legend
	Hangyong PDL
	to Hangzhou
	Xiaoshan–Ningbo
	railway
	Wenfu railway
	to Shenzhen
	This diagram: view; talk; ;

The Ningbo–Taizhou–Wenzhou railway on the coast of Zhejiang Province

The Ningbo–Taizhou–Wenzhou railway (simplified Chinese: 甬台温铁路; traditional Chinese: 甬台溫鐵路; pinyin: Yǒngtāiwēn Tiělù) is a dual-track, electrified, high-speed rail line in Zhejiang Province. The line, also known as the Yongtaiwen railway, is named after the three primary cities along route: Ningbo, whose abbreviated Chinese name is Yong, Taizhou and Wenzhou. The line has a total length of 282.4 kilometres and forms part of China's Southeast Coast high-speed rail corridor.^[1] Construction began in October 2005, and the line opened to commercial service on September 28, 2009. Trains running on the line reach top speeds of 250 kilometres per hour, and the shortest trip between Ningbo and Wenzhou takes 1 hour 12 minutes.^[1]

Route[]

The Ningbo–Taizhou–Wenzhou railway follows the rugged but prosperous coast of Zhejiang. Major cities and towns along route include Fenghua, Ninghai, Sanmen, Linhai, Taizhou, Huangyan, Luqiao, Wenling, Yueqing, Yongjia, and Ouhai.^[1] At Ningbo, the line joins the Xiaoshan–Ningbo railway and the Hangzhou–Ningbo passenger-dedicated line. At Wenzhou, the line joins the Wenzhou–Fuzhou railway.

Here you can see the Wenzhou Train Station of the Ningbo–Taizhou–Wenzhou railway line.

History[]

The Ningbo–Taizhou–Wenzhou railway is the first railway to be built on the east coast of Zhejiang. Most high-speed rail lines in China follow the routes of older conventional railroads, but there were no railways on the southeast coast prior to the building of high-speed rail. Historically, the southeast coastal region relied on maritime transportation, and rugged terrain made railway construction more expensive. In the first half of the 20th century, warfare and political instability delayed railway construction. During the Cold War, the southeast coast faced the threat of invasion from Republic of China on Taiwan and all railways were built inland. Only when political tensions across the Taiwan Strait eased in the late 1990s did planning of the Yongtaiwen Line proceed. Construction began commenced in 2005 and track-laying was completed on May 15, 2009.^[1] Commercial service began on September 28, 2009.

Accident[]

On 23 July 2011, CRH train D3115, running from Hangzhou to Fuzhou South came to a halt over a viaduct near Wenzhou South after losing its power. Shortly afterwards, CRH train D301, running from Beijing South to Fuzhou, rear-ended the stationary D3115. The accident led to 35 deaths and 211 injured, raising concerns about the safety of the fast-expanding high-speed railway network of China.^[2]