Nitroso

Nitroso refers to a functional group in organic chemistry which has the NO group attached to an organic moiety. As such, various nitroso groups can be categorized as C-nitroso compounds (e.g., nitrosoalkanes; R−N=O), S-nitroso compounds (nitrosothiols; RS−N=O), N-nitroso compounds (e.g., nitrosamines, R¹N(−R²)−N=O), and O-nitroso compounds (alkyl nitrites; RO−N=O).

Synthesis[]

Nitroso compounds can be prepared by the reduction of nitro compounds^[1] or by the oxidation of hydroxylamines.^[2] Ortho-nitrosophenols may be produced by the Baudisch reaction. In the Fischer–Hepp rearrangement aromatic 4-nitrosoanilines are prepared from the corresponding nitrosamines.

Properties[]

Nitrosoarenes typically participate in a monomer–dimer equilibrium. The dimers, which are often pale yellow, are often favored in the solid state, whereas the deep-green monomers are favored in dilute solution or at higher temperatures. They exist as cis and trans isomers.^[4]

Due to the stability of the nitric oxide free radical, nitroso organyls tend to have very low C–N bond dissociation energies: nitrosoalkanes have BDEs on the order of 30–40 kcal/mol (130–170 kJ/mol), while nitrosoarenes have BDEs on the order of 50–60 kcal/mol (210–250 kJ/mol). As a consequence, they are generally heat- and light-sensitive. Compounds containing O–(NO) or N–(NO) bonds generally have even lower bond dissociation energies. For instance, , Ph₂N–N=O, has a N–N bond dissociation energy of only 23 kcal/mol (96 kJ/mol).^[5] Organonitroso compounds serve as a ligands for transition metals.^[6]

Reactions[]

Many reaction exists which make use of an intermediate nitroso compound, such as the Barton reaction and Davis–Beirut reaction, as well as in the synthesis of indoles, for example: Baeyer–Emmerling indole synthesis, Bartoli indole synthesis. In the Saville reaction, mercury is used to replace a nitrosyl from a thiol group.

Nitrosation vs. nitrosylation[]

Nitrite can enter two kinds of reaction, depending on the physico-chemical environment.

• Nitrosylation is adding a nitrosyl ion NO⁻ to a metal (e.g. iron) or a thiol, leading to nitrosyl iron Fe–NO (e.g., in nitrosylated heme = nitrosylheme) or S-nitrosothiols (RSNOs).
• Nitrosation is adding a nitrosonium ion NO⁺ to an amine –NH₂ leading to a nitrosamine. This conversion occurs at acidic pH, particularly in the stomach, as shown in the equation for the formation of N-phenylnitrosamine:

  NO⁻
  ₂ + H⁺ ⇌ HONO

  HONO + H⁺ ⇌ H₂O + NO⁺

  C₆H₅NH₂ + NO⁺ → C₆H₅N(H)NO + H⁺

Many primary alkyl N-nitroso compounds, such as CH₃N(H)NO, tend to be unstable with respect to hydrolysis to the alcohol. Those derived from secondary amines (e.g., (CH₃)₂NNO derived from dimethylamine) are more robust. It is these N-nitrosamines that are carcinogens in rodents.

Nitrosyl in inorganic chemistry[]

Nitrosyls are non-organic compounds containing the NO group, for example directly bound to the metal via the N atom, giving a metal–NO moiety. Alternatively, a nonmetal example is the common reagent nitrosyl chloride (Cl−N=O). Nitric oxide is a stable radical, having an unpaired electron. Reduction of nitric oxide gives the nitrosyl anion, NO⁻:

NO + e⁻ �� NO⁻

Oxidation of NO yields the nitrosonium cation, NO⁺:

NO → NO⁺ + e⁻

Nitric oxide can serve as a ligand forming metal nitrosyl complexes or just metal nitrosyls. These complexes can be viewed as adducts of NO⁺, NO⁻, or some intermediate case.

In food[]

In foodstuffs and in the gastro-intestinal tract, nitrosation and nitrosylation do not have the same consequences on consumer health.

• In cured meat: Meat processed by curing contains nitrite and has a pH of 5 approximately, where almost all nitrite is present as NO⁻
  ₂ (99%). Cured meat is also added with sodium ascorbate (or erythorbate or vitamin C). As demonstrated by S. Mirvish, ascorbate inhibits nitrosation of amines to nitrosamine, because ascorbate reacts with NO⁻
  ₂ to form NO.^[7][8] Ascorbate and pH 5 thus favor nitrosylation of heme iron, forming nitrosylheme, a red pigment when included inside myoglobin, and a pink pigment when it has been released by cooking. It participates to the "bacon flavor" of cured meat. According to a consultant for the European lobby for processed meats K-O Honikel,^[9] nitrosylheme is thus considered a benefit for the meat industry and for consumers.^[10] According to scientists outside of the processed-meat industry, nitrosylheme is considered a carcinogenic compound. ^{[11] [12] [13]}

• In the stomach: secreted hydrogen chloride makes an acidic environment (pH 2) and ingested nitrite (with food or saliva) leads to nitrosation of amines, that yields nitrosamines (potential carcinogens). Nitrosation is low if amine concentration is low (e.g., low-protein diet, no fermented food) or if vitamin C concentration is high (e.g., high fruit diet). Then S-nitrosothiols are formed, that are stable at pH 2.

• In the colon: neutral pH does not favor nitrosation. No nitrosamine is formed in stools, even after addition of a secondary amine or nitrite.^[14] Neutral pH favors NO⁻ release from S-nitrosothiols, and nitrosylation of iron. The previously called NOC (N-nitroso compounds) measured by Bingham's team in stools from red meat-fed volunteers^[15] were, according to Bingham and Kuhnle, largely non-N-nitroso ATNC (apparent total nitroso compounds), e.g., S-nitrosothiols and nitrosyl iron (as nitrosyl heme).^[16]

See also[]

• Nitrosamine, the functional group with the NO attached to an amine, such as R₂N–NO
• Nitrosobenzene
• Nitric oxide
• Nitroxyl

References[]